Sports products

In 1998, polyurethanes (PU) and engineering plastics were shown to make up some 58% of advanced materials used in sporting goods [2], and for the moulded sports products, polypropylene (PP) is used three times more, compared to the next most used plastic, acrylonitrile-butadiene-styrene (ABS) [1]. On the other hand, there are also trials for use of other plastics, even the use of tyre crumb for artificial surfaces, carpet underlays and playgrounds, although the use of the latter is not well developed yet (amounting to some 10% of the tyres crumbed). 

Table 6.8 Examples of reinforced plastic leisure and sport products...

Many compounds explode when triggered by a suitable stimulus however, most are either too sensitive or fail to meet cost and production-scale standards, requirements for safety in transportation, and storage stability. Propellants and explosives in large-scale use are based mosdy on a relatively small number of well-proven iagredients. Propellants and explosives for military systems are manufactured ia the United States primarily ia government owned plants where they are also loaded iato munitions. Composite propellants for large rockets are produced mainly by private iadustry, as are small arms propellants for sporting weapons. 

These thermoplastic natural mbber elastomers have a place in the modem world, where recycling has become so important, and when excessive heat is not found in service. Thus, footwear, gla2ing seals, sports goods, hose, domestic products, and a whole range of automotive products have already been identified for such use. It must be noted, however, that tines are not a potential market for these materials, because of the high temperatures which result from emergency braking. 

A wide range of polyurethane-type products has become available in recent years for coating applications. These include simple solutions of linear polyurethanes, two-pot alkyd-isocyanate and polyether-isocyanate systems and a variety of prepolymer and adduct systems. The coatings can vary considerably in hardness and flexibility and find use mainly because of their toughness, abrasion resistance and flexibility. Uses include metal finishes in chemical plant, wood finishes for boats and sports equipment, finishes for rubber goods and rain-erosion-resistant coatings for aircraft. One type of coating is potentially competitive with PVC leathercloth. Both alkyd-di-isocyanate and adduct-diisocyanate compositions may be coated on to fabrics from solutions of controlled viscosity and solids content. Such coated fabrics are soft, flexible and, unlike PVC leathercloth, free from plasticisers. 

Today, carbon fibers are still mainly of interest as reinforcement in composite materials [7] where high strength and stiffness, combined with low weight, are required. For example, the world-wide consumption of carbon fibers in 1993 was 7,300 t (compared with a production capacity of 13,000 t) of which 36 % was used in aerospace applications, 43 % in sports materials, with the remaining 21 % being used in other industries. This consumption appears to have increased rapidly (at 15 % per year since the early 1980s), at about the same rate as production, accompanied by a marked decrease in fiber cost (especially for high modulus fibers). 

Industrial refrigeration - New industrial refrigeration systems that are used by the chemical, petrochemical, pharmaceutical, oil and gas, and metallurgical industries, as well for industrial ice making and for sports and leisure facilities, can use ammonia and hydrocarbons as the refrigerant. Although the product base concerned is small, existing CFC equipment can be retrofitted to use HCFC-22, HFCs and HFC blends, and hydrocarbons. 

About 8,000 metric tons of peroxides were consumed in 1972. This consumption was strongly stimulated by the rapid growth in reinforced plastics (Ref 23). The largest volume product is benzoyl peroxide which is used in polystyrene and polyester markets for such items as toys, automobiles, furniture, marine, transportation and mil requirements. Also, methyl ethyl ketone peroxide is used in large volumes to cure (as a catalyst) styrene-unsatur-ated polyester adhesive resins used in mil ammo adhesive applications, as well as in glass fiber reinforced plastic products such as boats, shower stalls, tub components, automobile bodies, sports equipment, etc. The monoperesters are growing slowly because of some substitution of the peroxydicarbonates and azo compds (Refs 8,9 23)... 

Ephedra is used in diet products as an appetite depressant and stimulant, and in sports drinks to mask fatigue. It is also used as a bronchial stimulator, and to relieve symptoms of the common cold. 

---