Source materials

Clearly, the physical chemistry of surfaces covers a wide range of topics. Most of these subjects are sampled in this book, with emphasis on fundamentals and important theoretical models. With each topic there is annotation of current literature with citations often chosen because they contain bibliographies that will provide detailed source material. We aim to whet the reader s appetite for surface physical chemistry and to provide the tools for basic understanding of these challenging and interesting problems. 

The presence of defects and impurities is unavoidable. They are created during tire growtli or penetrate into tlie material during tlie processing. For example, in a crystal grown from tire melt, impurities come from tire cmcible and tire ambient, and are present in tire source material. Depending on factors such as tire pressure, tire pull rate and temperature gradients, tire crystal may be rich in vacancies or self-interstitials (and tlieir precipitates). 

Separation of a fat or oil from its source material can be accompHshed by several different methods. Selection of an extraction process is based on (/) obtaining oil substantially undamaged and relatively free of undesirable impurities, (2) achieving the highest practical yield, and (J) obtaining the maximum economic return on the oil and coproducts. 

Secondary and Micronutrients in Fertilizers The great majority of farm fertilizers are produced, marketed, and appHed with regard only to the primary plant nutrient content. The natural supply of secondary and micronutrients in the majority of soils is usually sufficient for optimum growth of most principal crops. There are, however, many identified geographical areas and crop—soil combinations for which soil appHcation of secondary and/or micronutrient sources is beneficial or even essential. The fertilizer industry accepts the responsibiHty for providing these secondary and micronutrients, most often as an additive or adjunct to primary nutrient fertilizers. However, the source chemicals used to provide the secondary and micronutrient elements are usually procured from outside the fertilizer industry, for example from mineral processors. The responsibiHties of the fertilizer producer include procurement of an acceptable source material and incorporation in a manner that does not decrease the chemical or physical acceptabiHty of the fertilizer product and provides uniform appHcation of the added elements on the field. 

Deposition process Source material Typical Typical substrate Sources of Typical films Typical electronics... 

Production. Indium is recovered from fumes, dusts, slags, residues, and alloys from zinc or lead—zinc smelting. The source material itself, a reduction bullion, flue dust, or electrolytic slime intermediate, is leached with sulfuric or hydrochloric acid, the solutions are concentrated, if necessary, and cmde indium is recovered as 99+% metal. This impure indium is then refined to 99.99%, 99.999%, 99.9999%, or higher grades by a variety of classical chemical and electrochemical processes. 

Molecular beam epitaxy (MBE) is a radically different growth process which utilizes a very high vacuum growth chamber and sources which are evaporated from controlled ovens (15,16). This technique is well suited to growing thin multilayer stmctures as a result of very low growth rates and the abihty to abmpdy switch source materials in the reactor chamber. The former has impeded the use of MBE for the growth of high volume LEDs. 

The brown crystalline manganese(III) acetate dihydrate is of considerable commercial importance because it is often used as the source material for other trivalent manganese compounds. It can be made by oxidation of manganese(II) acetate using chlorine or potassium permanganate, or by reaction of manganese(II) nitrate and acetic anhydride. 

Nuts have many uses, both industrial and domestic. For instance, the ivory nut, or tagua, is a source material for the manufacture of buttons and turnery articles. The kola nut supplies ingredients for popular cola beverages in the United States (see Carbonated beverages). StTychnos nux-vomica provides the important medicine and poison, strychnine. The areca or betel nut is chewed by the Indian and Malayan people as a narcotic a slice of the nut is placed in a leaf of the pepper plant Piper betle) together with a pinch of lime the mixture is an acrid, astringent narcotic that dyes the mouth red, blackens and destroys the teeth. The areca nut contains, among other alkaloids, arecoline, an active anthelminthic widely used in veterinary practice for the treatment of tapeworm infections. 

Most areas of research and appHcations involving the use of radioisotopes require a knowledge of what radiations come from each isotope. The particular apphcation determines what type of information is needed. If the quantity of a radionuchde in a particular sample or at a particular location is to be deterrnined and this value is to be deterrnined from the y-ray spectmm, the half-life of the nucHde and the energies and intensities or emission probabiUties of the y-rays of interest must be known. Usually it is preferable to use the y-rays for an assay measurement because the d- and P-rays ate much more readily absorbed by the source material, and may not reach the sample surface having their original energies. Once these energies are altered they caimot be used to identify the parent radionuchde. 

The materials deposited by PVD techniques include metals, semiconductors (qv), alloys, intermetaUic compounds, refractory compounds, ie, oxides, carbides, nitrides, borides, etc, and mixtures thereof. The source material must be pure and free of gases and inclusions, otherwise spitting may occur. 

Eield latex and field coagulum are the source materials for all varieties and grades of dry natural mbber that include the conventional International grades as weH as the Technically Specified Rubbers (TSR). 

Fig. 2. Source materials and production processes used to make the various grades of Standard Malaysian Rubber (SMR).

Until 1960, coal was the source material for almost all benzene produced in Europe. Petroleum benzene was first produced in Europe by the United Kingdom in 1952, by Erance in 1958, by the Eederal Republic of Germany in 1961, and by Italy in 1962. Coal has continued to decline as a benzene source in Europe, and this is evident with the closure of coke ovens in Germany (73). Most of the benzene produced in Europe is now derived from petroleum or pyrolysis gasoline. In Europe, pyrolysis gasoline is a popular source of benzene because European steam crackers mn on heavier feedstocks than those in the United States (73). 

Estimating Minimum Sample Quantity for Moisture Measurement Estimates of material quantity for testing moisture content depend on mechanisms of moisture distribution in the material. Moisture is physically retained on particle surfaces, chemically adsorbed on surfaces and within pores of particulate solids, and contained as an internal constituent of solids. Significant internal moisture is most often encountered in organic and agricultural source materials. 

List of formulae used 12/319 Further reading 12/320 Source material 12/320... 

Figure 1.6 Sputtering device for the formation of thin films by the bombardment of a source material by ions extracted from a plasma...

USA and Western European data were presented differently in the original source material. Pipe and conduit tonnages and also export sales as well as sales to compounders are included under Other for USA data. 

There has been recent interest in lactic acid polymers and copolymers. These materials are environmentally attractive in that renewal and cheap source materials such as potato waste and cheese whey may be used. Such materials have been used for some time in degradable and resorbable surgical sutures but recent efforts have been directed at food packaging applications. There is... 

There is a substantial literature on polymers and plastics and many monographs are listed at the end of individual chapters. In addition the following provide excellent comprehensive source material ... 

Other considerations are that the source material, which forms a target for high-energy electron bombardment leading to the production of X-rays, should be a good conductor- to enable rapid removal of heat - and should also be compatible with UHV. 

Basic data collection procedures need to be comprehensive and formalized. They should address completion of the collection forms, the filing and distribution of these forms, and retention requirements of data source materials and other documents. 

Source materials manufacturers technical bulletins, handbooks, other specialized literature... 

---