Solvatochromism solvent polarity

Solvatochromism Solvent polarity Analysis, sensors, monitoring of polymers and polymerisation... 

Duchemin, C. R., Engle, N. L., Bonnesen, P. V., Haverlock, T. J., Delmau, L. H., and Moyer, B. A Solvatochromic Solvent Polarity Measurements of Alcohol Solvent Modifiers and Correlation with Cesium Extraction Strength, Solvent Extr. Ion Exch. 19(2001), 1037-1058. 

Solvent Influence. Solvent nature has been found to influence absorption spectra, but fluorescence is substantiaHy less sensitive (9,58). Sensitivity to solvent media is one of the main characteristics of unsymmetrical dyes, especiaHy the merocyanines (59). Some dyes manifest positive solvatochromic effects (60) the band maximum is bathochromicaHy shifted as solvent polarity increases. Other dyes, eg, highly unsymmetrical ones, exhibit negative solvatochromicity, and the absorption band is blue-shifted on passing from nonpolar to highly polar solvent (59). In addition, solvents can lead to changes in intensity and shape of spectral bands (58). 

Dimroth et al. introduced 8 as a solvatochromic probe of solvent polarity having absorption in the visible region it shows the largest solvatochromic shift of any substance yet reported. Ey (30) is calculated with Eq. (8-76), like Z. (The peculiar symbolism arose because compound 8 happened to be No. 30 on the list of substances studied by Dimroth et al.) The shift is hypsochromic as solvent polarity is increased. Table 8-16 gives some Ey (30) values. - (30) is linearly... 

The merocyanine dye mentioned above shows solvatochromism, which means that the absorption band maximum of the quinoid form (D form) is sensitive to solvent polarity [40,41]. In Fig. 3, the absorption maximum of the solvatochromic band for M-Mc (a low molecular weight merocyanine analog) is plotted against the dielectric constant of 1,4-dioxane/water mixtures [42]. With the relationship... 

Note Solvent classification into groups based on solvent polarity selectivity parameters proton acceptor, proton donor, x dipole interactors) and solvent strength on alumina nd on silica gel 0. Physical constants viscosity (t)), surface tension (y), dielectric constant (8). Solvatochromic polarity parameters 7, j.(30) and Ej. ... 

The dielectric constant and refractive index parameters and different functions of them that describe the reactive field of solvent [45] are insufficient to characterize the solute-solvent interactions. For this reason, some empirical scales of solvent polarity based on either kinetic or spectroscopic measurements have been introduced [46,47]. The solvatochromic classification of solvents is based on spectroscopic measurements. The solvatochromic parameters refer to the properties of a molecule when its nearest neighbors are identical with itself, and they are average values for a number of select solutes and somewhat independent of solute identity. 

Solvatochromic pareuaeters, so called because they were Initially derived from solvent effects on UV/visible spectra, have been applied subsequently with success to a wide variety of solvent-dependent phenomena and have demonstrated good predictive ability. The B jo) scale of solvent polarity is based on the position of the intermolecular charge transfer absorption band of Reichardt s betaine dye [506]. Et(io> values are available for over 200 common solvents and have been used by Dorsey and co-%rarkers to study solvent interactions in reversed-phase liquid chromatography (section 4.5.4) [305,306]. For hydrogen-bonding solvents the... 

There have been several other attempts to define solvent polarity parameters, among the more successful being those related to solvatochromic shifts the shift in wave-length/frequency of a band in the spectrum of a suitable absorbing species resulting from its interaction with the molecules of a series of different solvents. Particularly large shifts were observed with the zwitterion (51),... 

Kamlet MJ, Abboud J-L, Taft R (1977) The solvatochromic comparison method. 6. The it scale of solvent polarities. JACS 99 6027-6038... 

Molecular rotors with a dual emission band, such as DMABN or A/,A/-dimethyl-[4-(2-pyrimidin-4-yl-vinyl)-phenyl]-amine (DMA-2,4 38, Fig. 13) [64], allow to use the ratio between LE and TICT emission to eliminate instrument- and experiment-dependent factors analogous to (10). One example is the measurement of pH with the TICT probe p-A,A-dimethylaminobenzoic acid 39 [69]. The use of such an intensity ratio requires calibration with solvent gradients, and influences of solvent polarity may cause solvatochromic shifts and adversely influence the calibration. Probes with dual emission bands often have points in their emission spectra that are independent from the solvent properties, analogous to isosbestic points in absorption spectra. Emission at these wavelengths can be used as an internal calibration reference. 

The fluorescence and absorption spectra of DTT-A.V-dioxidc 20a with polar covalent bonds was studied in THF, toluene, and decalin. The spectral line and peak energy are almost independent of the solvent polarity. The fluorescence spectra of the decalin and toluene solutions (almost the same polarity) are red-shifted by about 5 nm, with respect to the THF solution of higher polarity. No evident solvatochromism was observed. The absorbance and fluorescence excitation spectra (at the fluorescence peak wavelength) for DTT-3, 3 -dioxide 20a (normalized to peak value) was compared. The fluorescence excitation signal is, in fact, dependent both on the density of the excited state (as the absorbance) and on the efficiency of the relaxation from the excited state of the emitting one <2005PCB6004>. 

The solvatochromic phenolbetaine Reichardt s Dye (RD) allows to calculate a single parameter that indicates the overall polarity of the polymer. It is obtained by dissolving the dye in the polymer and measuring the absorbance maximum. The molar transition energy (Ex(30)) of RD is an empirical parameter to scale solvent polarity and is obtained by calculating18 Et(30) - hcvmaxNA OT 2.859vmaX R >. 

The pyridine ylide of la is the parent compound of the Dimroth-Reichardt betaine dyes used to probe solvent polarity.71,72 These dyes show a very pronounced solvatochromism, and the shifts of the absorption maxima as a function of the solvent polarity has been used to establish the quantitative ET30 scale. 

Reichardt, C., Solvatochromic dyes as solvent polarity indicators, Chem. Rev. 1994, 94, 2319 2358... 

The colour of indigo depends dramatically upon its physical state and environment for example, the vapour is red but the colour on the fibre is blue. The marked solvatochromism of indigo (Table 6.4) is attributable mainly to hydrogen bonding. A progressive bathochromic shift of the visible absorption band is observed as the solvent polarity... 

The Lewis basicity of the solvents was found to be more important for the solvatochromism than the solvent polarity, since such Si... solvent and Si... F interactions are competitive in the presence of solvents with donor atoms. In contrast, the analogous non-fluorinated polysilane, poly(methyl-/z-propylsilylene), revealed a disordered conformation in both coordinating and non-coordinating solvents. Additionally, the UV spectra of various molecular weight fractions of 87 showed an unusual molecular weight dependency an isosbestic point is apparent, suggesting an equilibrium between globule- and rod-like conformations at room temperature, which was also evident from the... 

The marked changes in the carbonyl IR bands accompanying the solvent variation from tetrahydrofuran to MeCN coincide with the pronounced differences in colour of the solutions. For example, the charge-transfer salt Q+ Co(CO)F is coloured intensely violet in tetrahydrofuran but imperceptibly orange in MeCN at the same concentration. The quantitative effects of such a solvatochromism are indicated by (a) the shifts in the absorption maxima and (b) the diminution in the absorbances at ACT. The concomitant bathochromic shift and hyperchromic increase in the charge-transfer bands follow the sizeable decrease in solvent polarity from acetonitrile to tetrahydrofuran as evaluated by the dielectric constants D = 37.5 and 7.6, respectively (Reichardt, 1988). The same but even more pronounced trend is apparent in passing from butyronitrile, dichloromethane to diethyl ether with D = 26, 9.1 and 4.3, respectively. The marked variation in ACT with solvent polarity parallels the behaviour of the carbonyl IR bands vide supra), and the solvatochromism is thus readily ascribed to the same displacement of the CIP equilibrium (13) and its associated charge-transfer band. As such, the reversible equilibrium between CIP and SSIP is described by (14), where the dissociation constant Kcip applies to a... 

Empirical scales of solvent polarity based on solvatochromic shifts... 

Compounds are called solvatochromic when the location of their absorption (and emission) spectra depend on solvent polarity. A bathochromic (red) shift and a hypsochromic (blue) shift with increasing solvent polarity pertain to positive and negative solvatochromism, respectively. Such shifts of appropriate solvatochromic compounds in solvents of various polarity can be used to construct an empirical polarity scale (Reichardt, 1988 Buncel and Rajagopal, 1990). 

Kosower in 1958 was the first to use solvatochromism as a probe of solvent polarity. The relevant Z-scale is based on the solvatochromic shift of 4-methoxycarbonyl-1-ethylpyridinium iodide (1). Later, Dimroth and Reichardt suggested using betain dyes, whose negative solvatochromism is exceptionally large. In particular, 2,6-... 

The first point to be addressed is the increase in dipole moment, Apt, on excitation of PRODAN (Formula in Figure 7.4). The determinations of A/x reported in the literature, apart from one, are based on solvatochromic shifts analyzed with the Lippert-Mataga equation. In the original paper by Weber and Farris Apt was estimated to be 20 D, but this value was later recognized to be overestimated and recalculation led to a value of 8 Da) b). Another study yielded a consistent value of 7 Dc) d). A completely different method based on transient dielectric loss measurement provided a somewhat lower value 4.4-5.0 Dd. From all these results, it can be concluded that the increase in dipole moment on excitation is not responsible for the high sensitivity of PRODAN to solvent polarity. 

In 1976, Kamlet and Taft introduced their solvatochromic comparison method [25, 26], The hydrogen-bond donor acidity a and basicity /3 together with the solvent polarity and polarizability jv were employed to correlate the solvent effects on reaction rates, equilibria, and spectroscopic properties XYZ according to equations of the form... 

Parameters of the Kamlet-Taft solvatochromic relationship. These parameters measure the contributions to overall solvent polarity of the hydrogen bond donor, the hydrogen bond acceptor, and the dipolarity/polarizability properties of solvents. 

---