Sodium chloride absorption

Prolonged administration of loop diuretics can lead to a second type of diuretic resistance. Enhanced delivery of sodium to the distal tubule can result in hypertrophy of distal convoluted cells.17 Subsequently, increased sodium chloride absorption occurs in the distal tubule which diminishes the effect of the loop diuretic on sodium excretion. Addition of a distal convoluted tubule diuretic, such as metolazone or hydrochlorothiazide, to a loop diuretic can result in a synergistic increase in urine output. There are no data to support the efficacy of one distal convoluted tubule diuretic over another. The common practice of administering the distal convoluted tubule diuretic 30 to 60 minutes prior to the loop diuretic has not been studied, although this practice may first inhibit sodium reabsorption at the distal convoluted tubule before it is inundated with sodium from the loop of Henle. 

Isolated perfused gills subjected to 26,000 CN-/L, as KCN Inhibited sodium chloride absorption across gill epithelium effect reversible if exposure <5 min and nonreversible if >30 min salt absorption effect regulated by (Na+ + K+) ATPase 11... 

Kirschner, L. B. (1983). Sodium chloride absorption across the body surface frog skins and other epithelia, Am. J. Physiol., 244, R429-R443. 

Inhibited sodium chloride absorption across gill 11... 

Sodium bicarbonate (eg, baking soda, Alka Seltzer) reacts rapidly with HC1 to produce carbon dioxide and NaCl. Formation of carbon dioxide results in gastric distention and belching. Unreacted alkali is readily absorbed, potentially causing metabolic alkalosis when given in high doses or to patients with renal insufficiency. Sodium chloride absorption may exacerbate fluid retention in patients with heart failure, hypertension, and renal insufficiency. 

Recovery of Ammonia. The filter Hquor contains unreacted sodium chloride and substantially all the ammonia with which the brine was originally saturated. The ammonia may be fixed or free. Fixed ammonia (ammonium chloride [12125-02-97]) corresponds stoichiometrically to the precipitated sodium bicarbonate. Free ammonia includes salts such as ammonium hydroxide, bicarbonate, and carbonate, and the several possible carbon—ammonia compounds that decompose at moderate temperatures. A sulfide solution may be added to the filter Hquor for corrosion protection. The sulfide is distilled for eventual absorption by the brine in the absorber. As the filter Hquor enters the distiller, it is preheated by indirect contact with departing gases. The warmed Hquor enters the main coke, tile, or bubble cap-fiUed sections of the distiller where heat decomposes the free ammonium compounds and steam strips the ammonia and carbon dioxide from the solution. 

Direct Chlorination of Ethylene. Direct chlorination of ethylene is generally conducted in Hquid EDC in a bubble column reactor. Ethylene and chlorine dissolve in the Hquid phase and combine in a homogeneous catalytic reaction to form EDC. Under typical process conditions, the reaction rate is controlled by mass transfer, with absorption of ethylene as the limiting factor (77). Ferric chloride is a highly selective and efficient catalyst for this reaction, and is widely used commercially (78). Ferric chloride and sodium chloride [7647-14-5] mixtures have also been utilized for the catalyst (79), as have tetrachloroferrate compounds, eg, ammonium tetrachloroferrate [24411-12-9] NH FeCl (80). The reaction most likely proceeds through an electrophilic addition mechanism, in which the catalyst first polarizes chlorine, as shown in equation 5. The polarized chlorine molecule then acts as an electrophilic reagent to attack the double bond of ethylene, thereby faciHtating chlorine addition (eq. 6) ... 

Certain chemicals (sorbents) have the ability to absorb moisture from a gas they may be either solid or liquid. Performance of a chemical dehumidifi cation device depends on the sorbent used. The sorbent must t>e able to attract and remove the sorbate, such as water, from the gas stream, Stirbems absorb water on the surface of the material by adsorption or by chemically combining with water (absorption). If the unit is regenerative, the process is reversible, allowing water to be removed. This is achieved by a sorbent such as silica gel, alumina gel, activated alumina, lithium chloride salt, lithium chloride solution, glycol solution, or molecular sieves. In the case of nonregenerative equipment, hygroscopic salts such as calcium chloride, urea, or sodium chloride are used. 

The oil thus obtained was dissolved in 4O0 cc of methanol and refluxed during one hour with 150 cc of 4N hydrochloric acid. The mixture was poured into a sodium chloride solution and extracted with ethyl acetate, washed to neutral, dried and evaporated to dryness. The product was a yellow oil which showed an ultraviolet absorption maximum characteristic of a A -3-ketone. 

Theory. Cadmium and zinc form negatively charged chloro-complexes which are absorbed by a strongly basic anion exchange resin, such as Duolite A113. The maximum absorption of cadmium and zinc is obtained in 0.12 M hydrochloric acid containing 100 g of sodium chloride per litre. The zinc is eluted quantitatively by a 2M sodium hydroxide solution containing 20 g of sodium chloride per litre, while the cadmium is retained on the resin. Finally, the cadmium is eluted... 

Absorption of all organic halogen compounds by activated charcoal, taking care to avoid misleading results by uptake of inorganic salts such as sodium chloride... 

Gaudette and Coatney [115] reported that primaquine phosphate was unstable when subjected to dry heat of 100 °C in the presence of sodium chloride for 24 h, when boiled in water for 24 h and when heated for 24 h at 100 or 200 °C in melted hydrogenated vegetable oil. These findings exclude the use of primaquine phosphate as a salt additive in cooking. Primaquine phosphate was isolated from the test preparations at alkaline pH by extraction into ethylene chloride, after which primaquine phosphate was returned to an aqueous phase by shaking with 0.1 N sulfuric acid the concentration of primaquine phosphate was then determined spectrophotometrically. The ultraviolet absorption curve of primaquine phosphate has maxima at 224, 266, 282, and 300 nm, and minima at 216, 250, 276, and 310 nm. A solution containing 10 yl/mL has an optical density of 0.375 at 282 nm optical densities were proportional to concentrations. 

Cryptosporidium all ages/children in developing areas/immunocompromised adults/outbreaks in developed areas 7-10 days (range 5-28 days) intermittent and scant to continuous and watery prostaglandins —> cAMP-mediated apical chloride secretion and inhibition of electroneutral sodium chloride and water absorption release of IL-1, IL-8 and TNF-a... 

Although infection with C. parvum is considered predominantly secretory, histopathologic studies have revealed varying degrees of villous atrophy and infiltration of inflammatory cells beneath the epithelial mucosa [85, 86], Prostaglandins, which are known to induce cAMP-mediated apical chloride secretion and inhibit electroneutral sodium chloride and water absorption in enterocytes, have been demonstrated to be elevated in a porcine model of cryptosporidiosis [87], Inflammatory cytokines such as IL-1, IL-8 and TNF-a are induced in intestinal epithelial cell lines infected with Cryptosporidium and in animal models of cryptosporidiosis and have been postulated to play a role in pathogenesis [88, 89], Expression of TNF-a and IL-1 mRNA in the majority of jejunal biopsies of adult volunteers after experimental infection were also observed, although this did not correlate with the enteric symptoms [90]. 

The large amount of sodium chloride in seawater samples causes nonspecific absorption [366-370], which can only be partially compensated by background correction. In addition the seawater matrix may give rise to chemical as well as physical interferences related to the complex physico-chemical phenomena [371-373] associated with vaporization of metals and of the matrix itself. 

Carr [562] has studied the effects of salinity on the determination of strontium in seawater by atomic absorption spectrometry using an air-acetylene flame. Using solutions containing 7.5 mg/1 strontium and between 5 and 14% sodium chloride, he demonstrated a decrease in absorption with increasing sodium chloride concentration. To overcome this effect a standard additions procedure is recommended. 

The chlorine liquefaction plant comprises a bromine-removal column, a compression-condensation unit and a Tetra absorption/distillation unit (Fig. 14.2). Waste streams of chlorine are absorbed in diluted cell-liquor in the chlorine destruction area. As a result, the destruction liquid contains sodium chloride and less sodium hydroxide than is usual. Bromine from the bromine-removal column is also added to the chlorine destruction unit. The hypochlorite solution that is formed contains a reasonable amount of bromine and salts. However, it is a hypochlorite of non-marketable quality. 

Figure 4.15 The absorption spectra (near the fundamental absorption edge) of sodium chloride and lithium fluoride at 300 K (reproduced with permission from Palik, 1985).

The sodium chloride (NaCl) crystal shows very high absorption and reflectivity in the infrared region, known as the Restrahlen region. The real and imaginary relative dielectric constants at 6000 nm are, respectively, ei = 16.8 and S2 = 91.4. At this wavelength, estimate (a) the refractive index and the extinction coefficient, and (b) the optical density and the reflectivity at normal incidence for a 1 mm thick NaCl sample, (c) If the previous sample is illuminated (at normal incidence) by a beam of intensity Iq at 6000 nm, estimate the intensity of this... 

As a relevant example, Figure 6.4 shows the room temperature absorption spectrum of Eu + in sodium chloride (NaCl). In this crystal, europium is incorporated in the divalent state, replacing Na+ lattice ions. The spectrum of Eu + ion in NaCl consists of two broad bands, centered at about 240 nm and 340 nm, which correspond to transitions from the ground state ( 87/2) of the 4f electronic configuration to states of the 4f 5d excited electronic configuration. In fact, the energy separation between... 

Spectra of the compounds with sodium chloride crystal structure (Fig. 24) show strong resemblance. Quantitative correlation between lattice parameters and absorption maxima is poor as seen on Table II. 

Concentrated sodium chloride injection Inadvertent direct injection or absorption of concentrated sodium chloride injection may give rise to sudden hypernatremia and such complications as cardiovascular shock, CNS disorders, extensive hemolysis, cortical necrosis of the kidneys, and severe local tissue necrosis (if administered extravascularly). Do not use unless solution is clear. When administered peripherally, slowly infuse through a small bore needle placed well within the lumen... 

Spectral interferences from the overlap of molecular bands and lines (e g. the calcium hydroxide absorption band on barium at 553.55 nm) cannot be so easily dismissed. Lead seems to be particularly prone to such non-specific absorption problems at the 217.0 nm line (e g. sodium chloride appears to give strong molecular absorption at this wavelength). This type of problem is encountered in practical situations, but can sometimes be removed by the technique of background correction (see Section 2.2.5.2). 

---