Rhodium titanium

Many examples of this type of reaction are known the decomposition of arsine the decomposition of phosphine on surfaces of glass, f porcelain, J silica the decomposition of formic acid vapour on a variety of different surfaces— glass, platinum, rhodium, titanium oxide, and others the decomposition of nitrous oxide on the surface of gold Tf the decomposition of sulphuryl chloride on the surface of glass the decomposition of hydrogen iodide on the surface of platinum ff the decomposition of hydrogen selenide on the surface of selenium. J J A general discussion... 

Rhodium, " titanium,and tungsten " complexes have also been used for this reaction. The reaction can be promoted photochemically and the rate is enhanced by the presence of primary amines.Coordinating ligands also accelerate the reaction,polymer-supported promoters have been developed " and there are many possible variations in reaction conditions.The Pauson-Khand reaction has been done under heterogeneous reaction conditions, and with... 

Figure 7.33. CO2 hydrogenation rate over the rhodium-titanium oxide catalyst as a function of oxide coverage of the metal [194],...

The above method has been used for the synthesis of metal alkyl (or aryl) o-bonded porphyrins of iron , cobalt rhodium titanium iridium gallium indium thallium, silicon germanium " " and tin ... 

Some metals used as metallic coatings are considered nontoxic, such as aluminum, magnesium, iron, tin, indium, molybdenum, tungsten, titanium, tantalum, niobium, bismuth, and the precious metals such as gold, platinum, rhodium, and palladium. However, some of the most important poUutants are metallic contaminants of these metals. Metals that can be bioconcentrated to harmful levels, especially in predators at the top of the food chain, such as mercury, cadmium, and lead are especially problematic. Other metals such as silver, copper, nickel, zinc, and chromium in the hexavalent oxidation state are highly toxic to aquatic Hfe (37,57—60). 

Nitric acid reacts with all metals except gold, iridium, platinum, rhodium, tantalum, titanium, and certain alloys. It reacts violentiy with sodium and potassium to produce nitrogen. Most metals are converted iato nitrates arsenic, antimony, and tin form oxides. Chrome, iron, and aluminum readily dissolve ia dilute nitric acid but with concentrated acid form a metal oxide layer that passivates the metal, ie, prevents further reaction. 

HDPE resias are produced ia industry with several classes of catalysts, ie, catalysts based on chromium oxides (Phillips), catalysts utilising organochromium compounds, catalysts based on titanium or vanadium compounds (Ziegler), and metallocene catalysts (33—35). A large number of additional catalysts have been developed by utilising transition metals such as scandium, cobalt, nickel, niobium, molybdenum, tungsten, palladium, rhodium, mthenium, lanthanides, and actinides (33—35) none of these, however, are commercially significant. 

Sodium nitrite has been synthesized by a number of chemical reactions involving the reduction of sodium nitrate [7631-99-4] NaNO. These include exposure to heat, light, and ionizing radiation (2), addition of lead metal to fused sodium nitrate at 400—450°C (2), reaction of the nitrate in the presence of sodium ferrate and nitric oxide at - 400° C (2), contacting molten sodium nitrate with hydrogen (7), and electrolytic reduction of sodium nitrate in a cell having a cation-exchange membrane, rhodium-plated titanium anode, and lead cathode (8). 

The corrosion behaviour of amorphous alloys has received particular attention since the extraordinarily high corrosion resistance of amorphous iron-chromium-metalloid alloys was reported. The majority of amorphous ferrous alloys contain large amounts of metalloids. The corrosion rate of amorphous iron-metalloid alloys decreases with the addition of most second metallic elements such as titanium, zirconium, vanadium, niobium, tantalum, chromium, molybdenum, tungsten, cobalt, nickel, copper, ruthenium, rhodium, palladium, iridium and platinum . The addition of chromium is particularly effective. For instance amorphous Fe-8Cr-13P-7C alloy passivates spontaneously even in 2 N HCl at ambient temperature ". (The number denoting the concentration of an alloy element in the amorphous alloy formulae is the atomic percent unless otherwise stated.)... 

Rhodium and iridium have a resistance to anodic corrosion comparable with that of platinum, and are more resistant to the influence of alternating currents. A platinum-iridium alloy, in the form of a coating on titanium, is preferred to pure platinum for the production of chlorine from brine , due to its improved corrosion resistance and lower overvoltage. 

Z 1 Niobium 1 Nitrate 1 Osmium 73 a. I Perchlorate Phenols u a o Platinum o 0. 1 5 u 1 Rhodium 1 Rubidium Ruthenium Scandium 1 Selenium Silver I Sodium 1 Strontium 1 Sulphate Sulphides, organic Sulphur dioxide 1 Tantalum 1 Tellurium 1 Thallium Thorium e H 1 Titanium a u ab a 1- I Uranium 1 Vanadium 1 Yttrium 1 Zinc Zirconium... 

Identify the element with the larger atomic radius in each of the following pairs (a) vanadium and titanium (b) silver and gold (c) vanadium and tantalum (d) rhodium and iridium. 

One of the commonest reactions in the chemistry of transition-metal complexes is the replacement of one ligand by another ligand (Fig. 9-3) - a so-called substitution reaction. These reactions proceed at a variety of rates, the half-lives of which may vary from several days for complexes of rhodium(iii) or cobalt(m) to about a microsecond with complexes of titanium(iii). 

Titanium sulphate Srconiuin sulphate Rhodium sulphate... 

The polymers were converted to supported catalysts corresponding to homogeneous complexes of cobalt, rhodium and titanium. The cobalt catalyst exhibited no reactivity in a Fischer-Tropsch reaction, but was effective in promoting hydroformylation, as was a rhodium analog. A polymer bound titanocene catalyst maintained as much as a 40-fold activity over homogeneous titanocene in hydrogenations. The enhanced activity indicated better site isolation even without crosslinking. 

While it is beyond the scope of this chapter to cover the asymmetric hydrosilylation of ketones and imines in any detail, a number of the more catalytically active ML combinations will be mentioned here. A full review of the area has recently appeared.138 Asymmetric hydrosilylation of carbonyl groups is usually performed with rhodium or titanium catalysts bearing chelating N- or P-based ligands. Representative results for some of the most active Rh/L combinations (Scheme 32) for addition of Si H to acetophenone are given in Table 11. 

The enantioselective hydrosilylation of 2-pentylcyclopentenone is effected with PMHS and an active catalyst derived from (R.R)-ethylenebis(tetrahydro-indenyl)titanium difluoride and phenylsilane (EBTHI)Ti (Eq. 3 50).587 The use of diphenylsilane, a rhodium catalyst, and (W, / )-(. ,.S )-BuTRAP as the chiral ligand gives similar results.576 Other related approaches give greatly inferior enantioselectivies, 592 594... 

A titanium-mediated amination followed by a directed rhodium-catalyzed C-H functionalization of an olefinic C-H leads to heterocycles (Equation (184)).149... 

Many metals including nickel,32,33 ruthenium,34 iridium,35 36 lanthanum,37,38 titanium,39 and zirconium40-42 have been employed in this transformation with varying degrees of success, but rhodium has remained the metal of choice for transition metal hydroboration. The mechanism of rhodium-catalyzed hydroboration (Scheme 4), is thought to depend on the nature of the substrate, the catalyst, the ligand used and the reaction conditions employed.43... 

In this chapter, we will focus on the rhodium-catalyzed hydrogenation of functionalized ketones and the development of chiral phosphorous ligands for this process. Although there are other chiral phosphorous ligands which are effective for ruthenium-, iridium-, platinum-, titanium-, zirconium-, and palladium-catalyzed hydrogenation, they will not be discussed here. For details of these chemistries, the reader should refer to other chapters of this book. 

A similar type of immobilization was obtained by reacting the phosphonylated 2,2 -bipyridine ligand depicted in Figure 42.10 with excess titanium alkoxide. Rhodium and iridium complexes of this immobilized ligand showed activity for... 

Organometallic compounds, 14 550-551 25 71. See also Organometallics carbides contrasted, 4 648 as initiators, 14 256-257 iridium, 19 649-650 molybdenum(III), 17 27 osmium, 19 642-643 palladium, 19 652 platinum, 19 656-657 reaction with carbonyl groups, 10 505-506 rhodium, 19 645-646 ruthenium, 19 639 sodium in manufacture of, 22 777 titanium(IV), 25 105-120 Organometallic fullerene derivatives,... 

---