Resorcinol-formaldehyde resin adhesive

Resorcinol-formaldehyde resin adhesion promoter, thermoplastics Bis (3-triethoxysilylpropyl) amine N-(n-Butyl)-3-aminopropyltrimethoxysilane 3-Glycidyloxypropyltriethoxysilane adhesion promoter, thermoset vinyl resins Methacrylatochromic chloride adhesion promoter, thermosets Bis (3-triethoxysilylpropyl) amine N-(n-Butyl)-3-aminopropyltrimethoxysilane 3-Glycidyloxypropyltriethoxysilane adhesion promoter, tile cements Methyl hydroxyethylcellulose adhesion promoter, UV cured metal coatings Dimethylaminoethyl acrylate adhesion promoter, varnishes Maleic resin... 

Nitro-1-butanol 2-Nitro-2-methyl-1-propanol adhesive, tire-cord Resorcinol-formaldehyde resin adhesive, tissue Methyl 2-cyanoacrylate... 

Tire Cord. Melamine resins are also used to improve the adhesion of mbber to reinforcing cord in tires. Textile cord is normally coated with a latex dip solution composed of a vinylpyridine—styrene—butadiene latex mbber containing resorcinol—formaldehyde resin.. The dip coat is cured prior to use. The dip coat improves the adhesion of the textile cord to mbber. Further improvement in adhesion is provided by adding resorcinol and hexa(methoxymethyl) melamine [3089-11 -0] (HMMM) to the mbber compound which is in contact with the textile cord. The HMMM resin and resorcinol cross-link during mbber vulcanization and cure to form an interpenetrating polymer within the mbber matrix which strengthens or reinforces the mbber and increases adhesion to the textile cord. Brass-coated steel cord is also widely used in tires for reinforcement. Steel belts and bead wire are common apphcations. Again, HMMM resins and resorcinol [108-46-3] are used in the mbber compound which is in contact with the steel cord to reinforce the mbber and increase the adhesion of the mbber to the steel cord. This use of melamine resins is described in the patent Hterature (49). 

Nitrile rubber is compatible with phenol-formaldehyde resins, resorcinol-formaldehyde resins, vinyl chloride resins, alkyd resins, coumarone-indene resins, chlorinated rubber, epoxies and other resins, forming compositions which can be cured providing excellent adhesives of high strength, high oil resistance and high resilience. On the other hand, NBR adhesives are compatible with polar adherends such as fibres, textiles, paper and wood. Specific formulations of NBR adhesives can be found in [12]. 

Where resorcinol adhesives are not suitable, resins can be prepared from modified resorcinol [128], Characteristic of these types of resins arc those used for tyre cord adhesives, in which a pure resorcinol-formaldehyde resin is used, or alternatively, alkyl resorcinol or oil-soluble resins suitable for rubber compounding are obtained by prereaction of resorcinol with fatty acids in the presence of sulfuric acid at high temperature followed by reaction with formaldehyde. Worldwide more than 90% of resorcinol adhesives are used as cold-setting wood adhesives. The other most notable application is as tyre cord adhesives, which constitutes less than 5% of the total use. 

A mixture of rubber latex and resorcinol-formaldehyde resin used to treat man-made and synthetic textiles to improve rubber/textile adhesion. 

Results of a 2-year paint study indicate acetylated wood is a better painting surface (37) than untreated wood. UV radiation darkens unacetylated wood, but there is no change or a slight bleached effect with acetylated wood (37). In general, acetylation reduces the adhesive strength of wood (48). Adhesive strength is reduced with urea-formaldehyde resins (54, 55) and casein glues (55), but there is very little effect with resorcinol-formaldehyde resins (55). 

Use Curing of phenolformaldehyde and resorcinol-formaldehyde resins, rubber-to-textile adhesives, protein modifier, organic synthesis, pharmaceuticals, ingredient of highly explosive cyclonite, fuel tablets, rubber accelerator, fungicide, corrosion inhibitor, shrink-proofing textiles, antibacterial. 

Use Resorcinol-formaldehyde resins, dyes, pharmaceuticals, cross-linking agent for neoprene, rubber tackifier, adhesives for wood veneers and rubber-to-textile composites, manufacture of styphnic acid, cosmetics. 

Furfural has replaced formaldehyde in phenol-resorcinol-formaldehyde resins.These formaldehyde-containing resins have been used as cold-set, exterior grade structural wood adhesives for almost half a century. The use of furfural to prepare these resins has several advantages. In addition to longer resin shelf life, when furfural is used, the emission of formaldehyde is lowered. To enhance the reaction rate when furfural is used, a small amount of formaldehyde is added to the furfural system. Hence, the furfural system is not formaldehyde-free, but nearly so. Finally, furfural has a higher molecular weight than formaldehyde. This results in a smaller amount of the expensive resorcinol being required in the system. 

A second type of urethane adhesive is currently being introduced to the U.S. construction industry. The adhesive was originally developed in Japan. The system is two component. The isocyanate component is a modified polymeric MDI. The cross-linkable component contains water with water-soluble or water-emulsifiable resins. The adhesive produces strong, water-resistant bonds and has shown promise as a possible lower cost substitute for resorcinol formaldehyde resins in the adhesion of laminated beams. The product is now being used in Japan to bond wood and various other porous substrates at the rate of about 10 million pounds per year. The first U.S. application of the product has been the bonding of wood doors. The opportunities for products of this type should be excellent in view of the ever-increasing governmental pressures on solvents. 

Application of solubility parameter match is also demonstrated in adhesives for polyester tire cord. Whereas resorcinol-formaldehyde resin is used in conjunction with polyvinylpyridine latex as an adhesive for rayon tire cord, this composition is not suitable for poly (ethylene terephthalate) (PET) cord. However, using hexylresorcinol rather than resorcinol results in a match of the solubility parameters of adhesive and fiber with resultant increased adhesion (21). 

Resorcinol is used in the manufacture of resorcinol-formaldehyde resins, resin adhesives, dyes, drugs, and explosives in tanning in cosmetics and in dyeing and printing textiles. 

So, in this chapter the interest and importance of the polymer gel theory approach to the formulation of adhesives will be briefly shown and, in particular, we will limit this to thermosetting wood adhesives obtained by polycondensation such as phenol-formaldehyde-, urea-formaldehyde-, melamine-formaldehyde- and resorcinol-formaldehyde-based adhesives. The same approach is, however, very valid for other polycondensation resins, and also for adhesives obtained by routes other than polycondensation. 

Resorcinol-formaldehyde resin saturant, adhesives Acrylonitrile copolymer saturant, fiber laminates EthyleneA/A copolymer saturant, medical/surgical applies. 

---