Adhesion chloride,

Copolymerisation of vinyl acetate and vinyl chloride yields resins of desirable properties they are strong and adhesive, thermoplastic, and are suitable for the manufacture of synthetic fibre (Vinyon). 

Another widely used overlay adhesive is the contact type. These specialized adhesives, in the same group as mbber cement, may be of the solvent-base or water-base types. They are often used to bond overlays such as wood veneer, vinyl (poly(vinyl chloride)) films, or high pressure laminates such as countertop overlays. 

Other Plastics Uses. The plasticizer range alcohols have a number of other uses in plastics hexanol and 2-ethylhexanol are used as part of the catalyst system in the polymerization of acrylates, ethylene, and propylene (55) the peroxydicarbonate of 2-ethylhexanol is utilized as a polymerization initiator for vinyl chloride various trialkyl phosphites find usage as heat and light stabHizers for plastics organotin derivatives are used as heat stabHizers for PVC octanol improves the compatibHity of calcium carbonate filler in various plastics 2-ethylhexanol is used to make expanded polystyrene beads (56) and acrylate esters serve as pressure sensitive adhesives. 

The principal chemical markets for acetylene at present are its uses in the preparation of vinyl chloride, vinyl acetate, and 1,4-butanediol. Polymers from these monomers reach the consumer in the form of surface coatings (paints, films, sheets, or textiles), containers, pipe, electrical wire insulation, adhesives, and many other products which total biUions of kg. The acetylene routes to these monomers were once dominant but have been largely displaced by newer processes based on olefinic starting materials. 

AppHcation of an adhesion-promoting paint before metal spraying improves the coating. Color-coded paints, which indicate compatibiHty with specific plastics, can be appHed at 20 times the rate of grit blasting, typically at 0.025-mm dry film thickness. The main test and control method is cross-hatch adhesion. Among the most common plastics coated with such paints are polycarbonate, poly(phenylene ether), polystyrene, ABS, poly(vinyl chloride), polyethylene, polyester, and polyetherimide. 

Methylene chloiide formulas are the most common organic chemical removers. The low molar volume of methylene chloride allows it to rapidly penetrate the finish by entering the microvoids of the finish. When the solvent teaches the substrate, the remover releases the adhesive bond between the finish and the substrate and causes the finish to swell. The result is a bhstering effect and an efficient rapid lifting action. Larger molecule solvents generally cannot... 

Vinyl resins ie, copolymers of vinyl chloride and vinyl acetate which contain hydroxyl groups from the partial hydrolysis of vinyl acetate and/or carboxyl groups, eg, from copolymerized maleic anhydride, may be formulated with alkyd resins to improve their appHcation properties and adhesion. The blends are primarily used in making marine top-coat paints. 

Urea resin adhesives, by the use of the proper hardener, may be set either by heat or at room temperature. For room temperature curing, the hardener may be ammonium chloride, together with basic materials like calcium phosphate to neutralize excess acid that might damage the wood. Cold set or room temperature set adhesives are those that set satisfactorily at 20 —30°C, whereas a hot set adhesive generally means one that is set above 99 °C. 

Ammonium chloride has a number of iadustrial uses, most importantiy ia the manufacture of dry-ceU batteries, where it serves as an electrolyte. It is also used to make quarryiag explosives, as a hardener for formaldehyde-based adhesives, as a flame suppressant, and ia etching solutions ia the manufacture of ptinted circuit boards. Other appHcations iaclude use as a component of fluxes ia ziac and tin plating, and for electrolytic refining of ziac. 

Sihcone products dominate the pressure-sensitive adhesive release paper market, but other materials such as Quilon (E.I. du Pont de Nemours Co., Inc.), a Werner-type chromium complex, stearato chromic chloride [12768-56-8] are also used. Various base papers are used, including polyethylene-coated kraft as well as polymer substrates such as polyethylene or polyester film. Sihcone coatings that cross-link to form a film and also bond to the cellulose are used in various forms, such as solvent and solventless dispersions and emulsions. Technical requirements for the coated papers include good release, no contamination of the adhesive being protected, no blocking in roUs, good solvent holdout with respect to adhesives appHed from solvent, and good thermal and dimensional stabiUty (see Silicon COMPOUNDS, silicones). 

The exceUent adhesion to primed films of polyester combined with good dielectric properties and good surface properties makes the vinyhdene chloride copolymers very suitable as binders for iron oxide pigmented coatings for magnetic tapes (168—170). They perform very weU in audio, video, and computer tapes. 

Vinylidene Chloride Copolymer Latex. Vinyhdene chloride polymers are often made in emulsion, but usuaUy are isolated, dried, and used as conventional resins. Stable latices have been prepared and can be used direcdy for coatings (171—176). The principal apphcations for these materials are as barrier coatings on paper products and, more recently, on plastic films. The heat-seal characteristics of VDC copolymer coatings are equaUy valuable in many apphcations. They are also used as binders for paints and nonwoven fabrics (177). The use of special VDC copolymer latices for barrier laminating adhesives is growing, and the use of vinyhdene chloride copolymers in flame-resistant carpet backing is weU known (178—181). VDC latices can also be used to coat poly(ethylene terephthalate) (PET) bottles to retain carbon dioxide (182). 

Materials are also blended with VDC copolymers to improve toughness (211—214). VinyHdene chloride copolymer blended with ethylene—vinyl acetate copolymers improves toughness and lowers heat-seal temperatures (215,216). Adhesion of a VDC copolymer coating to polyester can be achieved by blending the copolymer with a linear polyester resin (217). 

Vinyls. Vinyl resins are thermoplastic polymers made principally from vinyl chloride other monomers such as vinyl acetate or maleic anhydride are copolymerized to add solubUity, adhesion, or other desirable properties (see Maleic anhydride, maleic acid, and fumaric acid). Because of the high, from 4,000 to 35,000, molecular weights large proportions of strong solvents are needed to achieve appHcation viscosities. Whereas vinyls are one of the finest high performance systems for steel, many vinyl coatings do not conform to VOC requirements (see Vinyl polymers). 

---