Resistance documentation

Table 4 summarizes electrochemical test data for 316L sintered in hydrogen and under vacuum [24]. In these examples, inferior corrosion resistance, documented also by neutral salt spray data, can be attributed to greater degrees of reoxidation of the surface of a specimen during cooling... 

J. Dekker and S. G. Georgopoulos, eds.. Fungicide Resistance in Crop Protection, Centre for Agdcultural Publishing and Documentation, Wageningen, the Nethedands, 1982. 

For reasons that are not fiiUy understood, PPSF exhibits generally improved compatibiUty characteristics over either PSF or PES in a number of systems. An example of this is blends of PPSF with polyaryletherketones (39,40). These blends form extremely finely dispersed systems with synergistic strength, impact, and environmental stress cracking resistance properties. Blends of PPSF with either PSF or PES are synergistic in the sense that they exhibit the super-toughness characteristic of PPSF at PSF or PES contents of up to 35 wt % (33,34). The miscibility of PPSF with a special class of polyimides has been discovered and documented (41). The miscibility profile of PPSF with high temperature (T > 230° C) polysulfones has been reported (42). 

The corrosion behavior of tantalum is weU-documented (46). Technically, the excellent corrosion resistance of the metal reflects the chemical properties of the thermal oxide always present on the surface of the metal. This very adherent oxide layer makes tantalum one of the most corrosion-resistant metals to many chemicals at temperatures below 150°C. Tantalum is not attacked by most mineral acids, including aqua regia, perchloric acid, nitric acid, and concentrated sulfuric acid below 175°C. Tantalum is inert to most organic compounds organic acids, alcohols, ketones, esters, and phenols do not attack tantalum. 

Industrial resistance thermometers are also the subject of a number of national and international standards, which describe both cahbration constants and classes of accuracy and interchangeabihty. lEC pubhcation 751 was revised in 1976 to conform to ITS-90, and national standards will be revised to conform to this document. lEC 751 uses the fixed-poiat values of ITS-90 with the simpler algorithm of IPTS-48 ... 

Infectious patients present a difficult challenge when trying to protect health care workers. These patients must be isolated from the health care workers as well as from the other patients in the hospital. Special isolation rooms are used for this purpose. These rooms are generally used for isolation of infectious tuberculosis (TB) patients, but could be used for patients with other airborne-transmitted diseases. In the United States, there were 22 812 new cases of tuberculosis in 1993, equal to 8.7 per 100 000 population. This represents a 2.8% increase since 1985, following a 6-7% annual decline from 1981-1984.Several studies have documented higher than expected tuberculin skin test (TST) conversion rates in hospital personnel.The National Institute for Occupational Safety and Health " reports that multiple-drug-resistant (MDR) strains of TB have been reported in 40 states and have caused outbreaks in at least 21 hospitals, with 18-35% of exposed workers having documented TST conversions. 

The most notable chemistry of the biscylopen-tadienyls results from the aromaticity of the cyclopentadienyl rings. This is now far too extensively documented to be described in full but an outline of some of its manifestations is in Fig. 25.14. Ferrocene resists catalytic hydrogenation and does not undergo the typical reactions of conjugated dienes, such as the Diels-Alder reaction. Nor are direct nitration and halogenation possible because of oxidation to the ferricinium ion. However, Friedel-Crafts acylation as well as alkylation and metallation reactions, are readily effected. Indeed, electrophilic substitution of ferrocene occurs with such facility compared to, say, benzene (3 x 10 faster) that some explanation is called for. It has been suggested that. 

The motivation to develop high-temp-resistant primers is well documented by McDonnell Aircraft Company (Ref 15), based on early work by... 

Wright, RJ USDA To document the extent of adult corn rootworm beetles resistence to methyl parathion throughout Nebraska. 

In order to improve reversion resistance, the use of PerkaUnk 900 is recommended. The highlights of performance enhancement are document by Datta and Hondeveld [86]. 

The NR compound 4 is known to be better under low temperature conditions than the control, but worse under high temperature conditions. Chemically, NR has the lowest thermal stability of the polymers used for tread compounds in tire technology and it has therefore the highest temperature dependence of abrasion and wear. Thus, it is generally accepted that NR has a higher wear resistance in a moderate climate than, for instance, SBR but a much lower one in hot climates. This will be thoroughly documented below under tire wear. 

Off-the-shelf catalogue sales of micro reactors have just started [15]. With an increasing number of commercial products, quality control will become more important. Brandner et al. describe quality control for micro heat exchangers/reactors at the Forschungszentrum Karlsruhe [23]. All manufacturing steps are accompanied by quality control and documentation. Leak rates (down to 10 mbar 1 s for He) and overpressure resistance (up to 1000 bar at ambient temperature) are measured. Under standardized conditions, the mean hydraulic diameter is determined. Dynamic tests supplement this quality control. 

Catechins and proanthocyanidins have a documented antiviral activity. Catechins from an extract of Cocos nucifera husk fibre exhibited a strong inhibitory activity against acyclovir-resistant herpes simplex virus type 1 (HSV-l-ACVr) [62]. The use of 10 to 20ngml of ECG and EGCG has been reported to cause 50% inhibition of human immunodeficiency virus reverse transcriptase [89], while Kara and Nakayama [90] reported that a patented chewing gum containing tea catechins is claimed to prevent viral infections against influenza and to inhibit dissemination of this virus. 

Aluminium toxicity is a major stress factor in many acidic soils. At soil pH levels below 5.0, intense solubilization of mononuclear A1 species strongly limits root growth by multiple cytotoxic effects mainly on root meristems (240,241). There is increasing evidence that A1 complexation with carboxylates released in apical root zones in response to elevated external Al concentration is a widespread mechanism for Al exclusion in many plant species (Fig. 10). Formation of stable Al complexes occurs with citrate, oxalate, tartarate, and—to a lesser extent— also with malate (86,242,243). The Al carboxylate complexes are less toxic than free ionic Al species (244) and are not taken up by plant roots (240). This explains the well-documented alleviatory effects on root growth in many plant species by carboxylate applications (citric, oxalic, and tartaric acids) to the culture media in presence of toxic Al concentrations (8,244,245) Citrate, malate and oxalate are the carboxylate anions reported so far to be released from Al-stressed plant roots (Fig. 10), and Al resistance of species and cultivars seems to be related to the amount of exuded carboxylates (246,247) but also to the ability to maintain the release of carboxylates over extended periods (248). In contrast to P deficiency-induced carboxylate exudation, which usually increases after several days or weeks of the stress treatment (72,113), exudation of carboxylates in response to Al toxicity is a fast reaction occurring within minutes to several hours... 

All application verification and soil samples must be individually labeled with unique sample identification (ID) and other identifying information such as study ID, test substance name, sample depth, replicate, subplot and date of collection, as appropriate. Proper study documentation requires that sample lists and labels be created prior to work commencing in the field. Water- and tear-resistant labels should be used since standard paper labels may become water-soaked and easily torn during sample handling. Sample lists should have the same information on them as the labels and are a convenient place to record plot randomization, initials of the individual who collected the sample, and date of collection. As such, the sample list is important in establishing chain of custody from the point of sample collection until its arrival at the laboratory. 

Antibiotic resistance plays a smaller role in pharyngitis therapy compared with other URIs. O Penicillin resistance has not yet been documented in group A streptococci, but resistance and clinical failures occur more frequently with tetracyclines, trimethoprim-sulfamethoxazole, and to a lesser degree macrolides. 

The cornerstone of cholera treatment is fluid replacement. Without treatment, the case-fatality rate for severe cholera is approximately 50%. For cholera, rice-based ORT is better than glucose-based ORT because it reduces the number of stools.21 Patients with significant disease should receive a short antibiotic course, 1 to 3 days, to shorten the duration of illness and decrease the number of stools. Doxycycline 300 mg once daily is the drug of choice. Other antibiotics shown to be effective include erythromycin, azithromycin, trimethoprim-sulfamethoxazole, and ciprofloxacin.2 Antibiotic resistance has been documented in V cholerae since 1977.2 Antibiotic prophylaxis is not warranted. 

An American Society of Civil Engineers (ASCE) document titled "Design of Blast Resistant Buildings in Petrochemical Facilities" (Ref. 9) is currently being developed. 

A rapidly increasing number of publications on polysilanes documents current interest in these polymers (JJ. Polysilanes are potentially applicable in microlithography as high resolution UV-resists (2J, imageable etch barriers ), or contrast enhancement layers (4). They have been successfully used as precursors to Si-C fibers (5J and ceramic reinforcing agents ((L). Polysilanes have also initiated polymerization of vinyl monomers (J ). Doping of polysilanes have increased their conductivity to the level of semiconductors (8). Very recently polysilanes were used as photoconductors (9) and non-linear optical materials (10b... 

---