Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Register-transfer level

It is now common practice, for verification as well as for synthesis purposes, to take the deterministic Mealy finite state machine (FSM hereafter for short) as abstract model for clock-synchronized circuits described at the register transfer level. The model is based on the following hypotheses ... [Pg.67]

Hafer, L. J. and Parker, A. C. (1983) A Formal Method for the Specification, Analysis, and Design of Register-Transfer Level Dgital Logic. IEEE Transacttions on Computer-Aided Design, Vol 2, No 1, pp 4-18. [Pg.288]

Thomas, D R, Lagnese, R D., Walker, RA., Nestor, J. A., Rqan, J. V. and Blackburn, R L (1990) Algnithmic and Register-Transfer Level Synthesis The System Architect s Workbench. Kluwer Academic Publishers. [Pg.289]

The remaining paper is structured as follows. Section 2 introduces our hardware models for data fiow descriptions and for register transfer level descriptions. It is formally defined when a register transfer level descriptions is a correct implementation of a data fiow specification. Section 3 sketches the pre-synthesis proof, which introduced conditions sufficient for correctness. It exploits the knowledge about the relationship between data flow, register transfers, and scheduling and allocation results. Section 4 explains how the post-synthesis verification procedure is implemented in HOL and how additional versions in SML and in C are introduced in order to get verification support with reasonable execution times. [Pg.294]

We are also working on synthesis steps following the high level synthesis step presented here. The timing of register transfer level descriptions is based on a control step scheme, and there are several alternatives to implement a control step scheme by clocking schemes. We will apply formal synthesis methods to map control step based descriptions to clock cycle based descriptions. [Pg.307]

After the success and the widespread acceptance of logic and register-transfer-level (RTL) synthesis, the next step is micro-architecture synthesis, commonly called behavioral synthesis or high-level synthesis. This chapter presents an advanced, high-level synthesis system called Amical that is targeted toward... [Pg.191]

I. Park, K. O Brien, and A. A. Jerraya. An interactive data-path allocation algorithm. IFIP Workshop on Control Dominated Synthesis from a Register Transfer Level Description, Grenoble, Prance, 1992. [Pg.210]

High level, hierarchical models provide useful analysis of different types of memory structures within the processor. Flows through the models and utilization parameters can be determined for different structures. Low level, register transfer level (RTL) simulation of specific structures usually give a more accurate picture... [Pg.2012]

Register—transfer level (RTL) At RTL, the characteristics of a circuit by operations and the transfer of data between the registers, etc. are defined. An explicit clock is used. RTL design... [Pg.1002]

The task of selecting the systems to include in the survey was by no means an easy one. There is a fairly strong consensus today on exactly what the term liigh-level synthesis means, and only the systems that fit this definition were included. However, any restriction by topic always raises border cases. For this survey, systems that convert Register-Transfer level descriptions into logic level descriptions (often called silicon compilers ) were not included neither were system level design tools. [Pg.1]

L.J. Hafer and A.C. Parker, Register-Transfer Level Design Automation The Allocation Process, Proc. I5th Design Automation Conference, pp. 213-219, June 1978. [Pg.32]

E.A. Snow, Automation of Module Set Independent Register-Transfer Level Design, PhD thesis. Department of Electrical Engineering, Camegie-Mellon University, April 1978. [Pg.34]

A formal Register-Transfer level hardware model, and automatic data path synthesis using linear programming techniques. [Pg.56]

Register-Transfer level transformations, automatic module binding and transformation to meet constraints, design space exploration, and a PDP-8 example. [Pg.58]

Edware D. Un, Evaluating Register-Transfer Level Synthesis Tools Using Gate Level Simulation, Master s Thesis, Dept, of Electrical and Computer Engineering, Carnegie Mellon University, January 1989. [Pg.73]

IBM s ALERT system was one of the first high-level synthesis systems, and included scheduling, data path synthesis, and structural transformations. The output was a Register-Transfer level design, specified in terms of Boolean equations. [Pg.92]

IBM s V compiler produces Register- Transfer level designs, which can then passed on to the LSS system for logic synthesis. The V compiler includes scheduling and data path synthesis, and can produce high level software simulators for the designs. A subset of the language is used to produce YIF format output for IBM s Yorktown Silicon Compiler and IBM s HIS System. [Pg.98]

The University of California at Irvine s YHDL Synthesis System (VSS) produces Register Transfer level designs, which can then passed on to the Microarchitecture and Logic Optimizer (MILO) system for optimization and library binding. The VSS includes transformations, scheduling, data path synthesis, and functional synthesis. [Pg.139]

The Univ. of Illinois IBA (Interleaved binder and Allocator) system consists of several parts Illinois Mixed behavior / Structure Language (IMBSL), which performs data path synthesis RLEXT (Register Level Exploration Tool), which allows a user to manually modify a Register-Transfer level design, and then automatically repairs any errors or omissions so that the final result matches the specified behavior, COD, a control unit synthesizer LE (Layout Estimator) and Fasolt, a Register-Transfer level datapath optimizer. See also Univ. of Southern California s ADAM System — Knapp used to be involved with that stem. [Pg.148]

A formal representation for Register-Transfer level designs, including the design library, the dataflow behavior, the timing model, the structural model, and the bindings between these representations and RLEXT overview. [Pg.150]


See other pages where Register-transfer level is mentioned: [Pg.228]    [Pg.235]    [Pg.13]    [Pg.183]    [Pg.32]    [Pg.219]    [Pg.17]    [Pg.66]    [Pg.217]    [Pg.274]    [Pg.278]    [Pg.292]    [Pg.293]    [Pg.307]    [Pg.4]    [Pg.4]    [Pg.24]    [Pg.192]    [Pg.21]    [Pg.5]    [Pg.5]    [Pg.55]    [Pg.60]   
See also in sourсe #XX -- [ Pg.4 , Pg.8 ]




SEARCH



Behavioral and Structural Representations at the REGISTER-TRANSFER Level

Register-Transfer Level Synthesis

Register-transfer level architecture

© 2026 chempedia.info