Raman spectroscopy, laboratory

See also Fourier Transformation and Sampling Theory FT-Raman Spectroscopy, Applications Gas Phase Applications of NMR Spectroscopy High Resolution IR Spectroscopy (Gas Phase), Applications Hydrogen Bonding and Other Physicochemical Interactions Studied By IR and Raman Spectroscopy Laboratory Information Management Systems (LIMS) Laser Spectroscopy Theory Light Sources and Optics Vibrational, Rotational and Raman Spectroscopy, Historical Perspective. 

The general task is to trace the evolution of the third order polarization of the material created by each of the above 12 Raman field operators. For brevity, we choose to select only the subset of eight that is based on two colours only—a situation that is connnon to almost all of the Raman spectroscopies. Tliree-coloiir Raman studies are rather rare, but are most interesting, as demonstrated at both third and fifth order by the work in Wright s laboratory [21, 22, 23 and 24]- That work anticipates variations that include infrared resonances and the birth of doubly resonant vibrational spectroscopy (DOVE) and its two-dimensional Fourier transfomi representations analogous to 2D NMR [25]. 

Examples that use Raman spectroscopy in the quantitative analysis of materials are enonnous. Technology that takes Raman based techniques outside the basic research laboratory has made these spectroscopies also available to industry and engineering. It is not possible here to recite even a small portion of applications. Instead we simply sketch one specific example. 

Lasers having wavelengths ranging from the deep uv to the near infrared have been used in Raman spectroscopy. In industrial laboratories, the most common laser is the Nd YAG operating at 1.06 pm. Increasingly, diode lasers or other lasers operating in the 750—785-nm region are encountered. These... 

D. P. Strommen and K. Nakamoto, laboratory Raman Spectroscopy ]olm. Wiley Sons, Inc., New York, 1984. 

Infrared Spectrophotometry. The isotope effect on the vibrational spectmm of D2O makes infrared spectrophotometry the method of choice for deuterium analysis. It is as rapid as mass spectrometry, does not suffer from memory effects, and requites less expensive laboratory equipment. Measurement at either the O—H fundamental vibration at 2.94 p.m (O—H) or 3.82 p.m (O—D) can be used. This method is equally appticable to low concentrations of D2O in H2O, or the reverse (86,87). Absorption in the near infrared can also be used (88,89) and this procedure is particularly useful (see Infrared and raman spectroscopy Spectroscopy). The D/H ratio in the nonexchangeable positions in organic compounds can be determined by a combination of exchange and spectrophotometric methods (90). 

The historical development and elementary operating principles of lasers are briefly summarized. An overview of the characteristics and capabilities of various lasers is provided. Selected applications of lasers to spectroscopic and dynamical problems in chemistry, as well as the role of lasers as effectors of chemical reactivity, are discussed. Studies from these laboratories concerning time-resolved resonance Raman spectroscopy of electronically excited states of metal polypyridine complexes are presented, exemplifying applications of modern laser techniques to problems in inorganic chemistry. 

The first laser Raman spectra were inherently time-resolved (although no dynamical processes were actually studied) by virtue of the pulsed excitation source (ruby laser) and the simultaneous detection of all Raman frequencies by photographic spectroscopy. The advent of the scanning double monochromator, while a great advance for c.w. spectroscopy, spelled the temporary end of time resolution in Raman spectroscopy. The time-resolved techniques began to be revitalized in 1968 when Bridoux and Delhaye (16) adapted television detectors (analogous to, but faster, more convenient, and more sensitive than, photographic film) to Raman spectroscopy. The advent of the resonance Raman effect provided the sensitivity required to detect the Raman spectra of intrinsically dilute, short-lived chemical species. The development of time-resolved resonance Raman (TR ) techniques (17) in our laboratories and by others (18) has led to the routine TR observation of nanosecond-lived transients (19) and isolated observations of picosecond-timescale events by TR (20-22). A specific example of a TR study will be discussed in a later section. 

Some characteristics of, and comparisons between, surface-enhanced Raman spectroscopy (SERS) and infrared reflection-absorption spectroscopy (IRRAS) for examining reactive as well as stable electrochemical adsorbates are illustrated by means of selected recent results from our laboratory. The differences in vibrational selection rules for surface Raman and infrared spectroscopy are discussed for the case of azide adsorbed on silver, and used to distinguish between "flat" and "end-on" surface orientations. Vibrational band intensity-coverage relationships are briefly considered for some other systems that are unlikely to involve coverage-induced reorientation. 

Under Lespieau s directorship, the Ecole Normale laboratory was open to students in physics and mineralogy as well as chemistry.33 The primary research program was the synthesis and study of nonsaturated organic compounds, along with the application to hydrocarbons of physical methods like Raoulf s techniques. With his former student, Maurice Bourguel, Lespieau was one of the first people in France to apply Raman spectroscopy to organic analysis.34... 

Raman spectroscopy s sensitivity to the local molecular enviromnent means that it can be correlated to other material properties besides concentration, such as polymorph form, particle size, or polymer crystallinity. This is a powerful advantage, but it can complicate the development and interpretation of calibration models. For example, if a model is built to predict composition, it can appear to fail if the sample particle size distribution does not match what was used in the calibration set. Some models that appear to fail in the field may actually reflect a change in some aspect of the sample that was not sufficiently varied or represented in the calibration set. It is important to identify any differences between laboratory and plant conditions and perform a series of experiments to test the impact of those factors on the spectra and thus the field robustness of any models. This applies not only to physical parameters like flow rate, turbulence, particulates, temperature, crystal size and shape, and pressure, but also to the presence and concentration of minor constituents and expected contaminants. The significance of some of these parameters may be related to the volume of material probed, so factors that are significant in a microspectroscopy mode may not be when using a WAl probe or transmission mode. Regardless, the large calibration data sets required to address these variables can be burdensome. 

Natural products, from plants and foods to rocks and minerals, are complicated systems, but their analysis by Raman spectroscopy is a growing area. Most examples come from quality control laboratories, motivated to replace current time-consuming sample preparation and analysis steps with a less labor-intensive, faster technique but most authors anticipated the eventual application to process control. Often a method will be practiced in a trading house or customs facility to distinguish between items perceived to be of different qualities, and thus prices. 

J.M. Shaver, Chemometrics for Raman spectroscopy, in Handbook of Raman Spectroscopy From the Research Laboratory to the Process Line, I.R. Lewis and H.G.M. Edwards (Eds), Practical Spectroscopy Series 28, Marcel Dekker, New York, 2001. 

Stroramen, D. P. Nakamoto, K. Laboratory Raman Spectroscopy Wiley New York, 1984. 

---