Propane, isomerization

Hydroformylation of 2,6-dimethyl-6-hepten-2-ol produces hydroxycitronellal (equation 12).22 Subjecting allyl alcohol to hydroformylation reaction conditions with HCo(CO>4 yields only propanal, isomerization taking place more rapidly than hydroformylation.2 Phosphine-modified rhodium catalysts will convert allyl alcohol to butane-1,4-diol under mild conditions in the presence of excess phosphine, however (equation 13).5 30 31 When isomerization is blocked, hydroformylation proceeds normally (equation 14). An elegant synthesis of the Prelog-Djerassi lactone has been accomplished starting with the hydroformylation of an allylic alcohol (equation IS).32... 

The interaction of unsaturated molecules, for example olefins and acetylenes, with transition metals is of paramount importance for a variety of chemical processes. Included among such processes are stereospecific polymerization of olefin monomers, the production of alcohols and aldehydes in the hydroformylation reaction, hydrogenation reactions, cyclo-propanation, isomerizations, hydrocyanation, and many other reactions. 

The mechanism by which propane isomerizes can also be explained by means of a chain mechanism, in a similar way as was done for butanes. 

Figure 2.10 Pressure dependence of the first-order rate constant for cyclo-propane isomerization. [After H.O. Pritchard, R.G. Sowden, and A.F. Trotman-Dickenson, Proc. Roy. Soc. (London), A217, 563, with permission of The Royal Society, (1953).]...

FIGURE 4 20 The bond dis sociation energies of methy lene and methyl C—H bonds in propane reveal difference in stabilities between two isomeric free radicals The secondary radical is more stable than the primary... 

Carbocations generated from alkanes using superacids react with carbon monoxide under mild conditions to form carboxyUc acid (188). In this process isomeric carboxyUc acids are produced as a mixture. However, when the reaction is mn with catalytic amounts of bromine (0.3 mmol eq) in HF-SbF solution, regio-selective carboxylation is obtained. / -Propane was converted almost exclusively to isobutyric acid under these conditions. 

Unsaturated substituents of dioxolanes 36-38 and dioxanes 39-41 are prone to prototropic isomerization under the reaction conditions. According to IR spectroscopy, the isomer ratio in the reaction mixture depends on the temperature and duration of the experiment. However, in all cases, isomers with terminal acetylenic (36, 39) or allenic (37, 40) groups prevail. An attempt to displace the equilibrium toward the formation of disubstituted acetylene 41 by carrying out the reaction at a higher temperature (140°C) was unsuccessful From the reaction mixture, the diacetal of acetoacetaldehyde 42, formed via addition of propane-1,3-diol to unsaturated substituents of 1,3-dioxanes 39-41, was isolated (74ZOR953). 

The inhibitive efficiency of alkali metal hydroxides increases with increased branching of polyethylene. This is confirmed by more pronounced effect of these hydroxides diminishing the yield of propane and propylene than in case of ethane and ethylene. The decreased yield of propane and propylene is also conditioned by more efficient inhibition of the macroradical isomerization stage by alkali metal hydroxides. Upon thermal destruction of polyethylene with the use of inhibitors the... 

Like propane, n-hutane is mainly obtained from natural gas liquids. It is also a hy-product from different refinery operations. Currently, the major use of n-hutane is to control the vapor pressure of product gasoline. Due to new regulations restricting the vapor pressure of gasolines, this use is expected to he substantially reduced. Surplus n-butane could be isomerized to isobutane, which is currently in high demand for producing isobutene. Isobutene is a precursor for methyl and ethyl tertiary butyl ethers, which are important octane number boosters. Another alternative outlet for surplus n-butane is its oxidation to maleic anhydride. Almost all new maleic anhydride processes are based on butane oxidation. 

Pure (A)-1 -chloropropene was obtained by careful distillation of a mixture of (E)- and ( )-l -chloropropene (available from Columbia Organic Chemicals Company Inc.) using a Nester-Faust Teflon annular spinning band column [(Z)-l-chloropropene has b.p. 33° (A)-l-chloropropene has b.p. 37°]. Small quantities of powdered sodium bicarbonate and hydroquinone (1,4-benzenediol) placed in the distillation flask inhibit acid-catalyzed isomerization and polymerization. Gas chromatographic analysis of the material used in these experiments on a 4-m., 15% l,2,3-tris(2-cyanoethoxy)propane (TCEP) on Chromosorb P column, operated at room temperature, typically indicated that it had isomeric purity >99.9%. (A)- 1-Chloropropene is stable for several months at room temperature, but it should be stored in a cool place. 

Other types of non-micro-channel, non-micro-flow micro reactors were used for catalyst development and testing [51, 52]. A computer-based micro-reactor system was described for investigating heterogeneously catalyzed gas-phase reactions [52]. The micro reactor is a Pyrex glass tube of 8 mm inner diameter and can be operated up to 500 °C and 1 bar. The reactor inner volume is 5-10 ml, the loop cycle is 0.9 ml, and the pump volume adds a further 9 ml. The reactor was used for isomerization of neopentane and n-pentane and the hydrogenolysis of isobutane, n-butane, propane, ethane, and methane at Pt with a catalyst. 

Examples for necessary process improvements through catalyst research are the development of one-step processes for a number of bulk products like acetaldehyde and acetic acid (from ethane), phenol (from benzene), acrolein (from propane), or allyl alcohol (from acrolein). For example, allyl alcohol, a chemical which is used in the production of plasticizers, flame resistors and fungicides, can be manufactured via gas-phase acetoxylation of propene in the Hoechst [1] or Bayer process [2], isomerization of propene oxide (BASF-Wyandotte), or by technologies involving the alkaline hydrolysis of allyl chloride (Dow and Shell) thereby producing stoichiometric amounts of unavoidable by-products. However, if there is a catalyst... 

C NMR analysis, 356,360,3611-362/ Reduction, 2,2-bis[4 -(4"-phenylsulfonyl phenoxyl)phenyl] propane, H NMR, 9 Repeating unit isomerization vs. 

Deoxygenation can oxidize the metal surfaces. It was found that the partially oxidized Cu surface was the most active in the isomerization of methy-loxirane to propanal.288 The same is true for Ni. Therefore, it is very likely that the metal ions produced by the oxidation of copper or nickel surfaces during deoxygenation play an important role in isomerization to aldehyde. 

In addition to this skeletal isomerization reaction, Anderson and Avery (24) showed that in a suitable isotopically labeled hydrocarbon, a reaction leading to positional isomerization occurred. Thus, with n-butane-l-13C as the reactant, the isomerization products were 2-(methyl-13C) propane, and 7i-butane-2-13C ... 

A different result was obtained in the cycloaddition to methylenecyclo-propanes 216-218 tearing alkoxycarbonyl substituents on the cyclopropyl ring. In this instance, 1,2,3-triazoles 220 isomeric with the triazolines 219 were formed in the reaction [57]. The formation of triazoles 220 is rationalised by the intermediate formation of triazolines 219, which are unstable under the reaction conditions and undergo a rearrangement to the aromatic triazoles via a hydrogen transfer that probably occurs with the assistance of the proximal ester carbonyl (Scheme 35). The formation of triazoles 220 also confirms the regio-chemistry of the cycloaddition for the methylene unsubstituted methylene-cyclopropanes, still leaving some doubt for the substituted ones 156 and 157. 

Up to about 10 percent of crs-stilbene was obtained when trimethyl-dioxetane 129 was decomposed in the presence of trans-stilbene 182) the electronic excitation energy of the excited carbonyl compounds formed in the cleavage of 129 (see Section V.) was transferred to trans-stilbene, so effecting the photochemical trans-cis isomerization. When bis (2.4-dinitrophenyl) oxalate reacted with hydrogen peroxide (see Section V. C. in the presence of o-tolyl-propane-1.2-dione 130, 2-methyl-2-... 

As part of a search for catalysts that can be used under biphasic conditions, zwitterionic Rh(sulphos)(cod) derivatives were studied. The isomerization of allyl alcohol proceeded within 1 h at 100 °C using only 1 mol% catalyst to give propanal in quantitative yield (Equation (12)).46 After separation of the product, the catalyst could be recycled three times with a slight deactivation after each run. 

An interesting pyrrolo[l,2-tf]pyrimidine was described as the product of the reaction of the heterocyclic ketene-aminals 236 that was synthesized by cyclocondensation of ketene dithioacetals 237 and 1,3-diamino propane. These compounds reacted with diethyl oxomalonate that behaves as an hetero-enophile, yielding the corresponding products 238 in acceptable to good yield (Scheme 31). A mechanism that involves an aza-ene reaction, via adduct 239 which isomerizes to ketene aminal 240 to produce the lactam ring of 238, has been proposed <1999J(P1)321>. 

A typical feature of hydroformylation is the fact that both sides of the double bond are in principle reactive, so only ethene yields propanal as a single product. From propene, two isomers are formed linear or normal butanal and 2-methylpropanal (branched or iso product). With longer chain 1-alkenes, the isomerization of the double bond to the thermodynamically more favored internal positions is possible, yielding the respective branched aldehydes (Fig. 1). Frequently, terminal hydroformylation is targeted because of the better biodegradability of the products. Thus, not only stability, activity, and chemoselectivity of the catalysts are important. A key parameter is also the regioselectivity, expressed by the n/i ratio or the linearity n/(n+i). 

The cis-trans isomerization of cyclopropanes is not restricted to the deuterium-substituted molecules, cis- and traws-l,2-Dimethylcyclo-propane have been shown to imdergo reversible geometrical isomerization as well as slower structural isomerization. All the processes are homogeneous and kinetically first order, and almost certainly unimolecular. The reaction scheme is shown below. 

---