Counter-flow micro reactor

Reactor 6 [R 6] Counter-flow Multi-plate Stack Micro Reactor... 

P 68] No detailed experimental protocol was given [61, 62,142,143]. Two reactant streams, the solution of the reactant in hexane and concentrated sulfuric acid, were fed separately in a specially designed micro reactor by pumping action. There, a bilayer was formed initially, potentially decomposed to a dispersion, and led to rapid mass transfer between the phases. From this point, temperature was controlled by counter-flow heat exchange between the reaction channel and surrounding heat-transfer channel. The reaction was typically carried out at temperatures from 0 to 50 °C and using residence times of only a few seconds. If needed, a delay loop of... 

In advance, comparative fixed-bed measurements were undertaken. It was ensured that the performance of a plug-flow operation with both flows having the same direction is superior to trickle-bed operation, using counter-flow instead. The plug flow was assumed to model the slug-flow behavior in the micro reactor. 

Integrated reactors One type of integrated reactor is micro structured heat exchanger/reactor concepts, which may work as cross- or counter-flow reactors. Another type couples endothermic and exothermic reactions in two separate flow paths normally operated in the co-current mode. Both reactor types are designed as prototype components of future fuel processors for mobile applications. 

Tonkovich et al. [123] claimed a 90% size reduction due to the introduction of micro channel systems into their device, which made use of the hydrogen off-gas of the fuel cell anode burnt in monoliths at palladium catalyst to deliver the energy for the fuel evaporation. A metallic nickel foam 0.63 cm high was etched and impregnated with palladium to act as a reactor for the anode effluent It was attached to a micro structured device consisting of liquid feed supply channels and outlet channels for the vapor, the latter flowing counter-flow to the anode effluent... 

The gas-phase microreactor can be used on the laboratory scale under maximum conditions of 3 bar and 500 °C. It is made up of a stack of stainless-steel micro-structured plates that are arranged for counter-flow or co-current flow practice. Already tested applications of this reactor include the dehydration of 2-propanol [109]. 

---