Potassium compounds reactions with

DOT CLASSIFICATION 5.1 Label Oxidizer SAFETY PROFILE A strong oxidizer. Ignites on contact with potassium thiocyanate. Reaction with CI2 yields explosive CIO2. When heated to decomposition it emits toxic fumes of CT. See also CHLORITES and CALCIUM COMPOUNDS. 

Meyers, C. Y. et al. New syntheses and reactions of organic compounds reactions with carbon tetrachloride and other perhalomethanes in powdered potassium hydroxide-r-butyl alcohol. In Catalysis in Organic Synthesis, pp. 197—278. New York Academic Press 1977 Meyers, C. Y. New reactions and syntheses of organic compounds. Reactions of sulfones with CCI4 and other perhalomethanes in KOH-r-BuOH. In Topics in Organic Sulfur Chemistry. Tish-ler, M. (ed.), pp. 207-260. Ljubljiana University Press 1978 Modin, R., Schill, G. Acta Pharm. Suec. 4, 301 (1967)... 

The condensation of aldehydes and ketones with succinic esters in the presence of sodium ethoxide is known as the Stobbe condensation. The reaction with sodium ethoxide is comparatively slow and a httlo reduction of the ketonic compound to the carbinol usually occurs a shorter reaction time and a better yield is generally obtained with the more powerful condensing agent potassium ieri.-butoxide or with sodium hydride. Thus benzophenone condenses with diethyl succinate in the presence of potassium [Pg.919]

Polymerization takes place, in the following manner in the presence of suitable peroxide catalyst these compounds polymerize with themselves (homopolymerizatiOn) in aqueous emulsion. When the reaction is complete, the emulsified polymer may be used directly or the emulsion coagulated to yield the solid polymer (312). A typical polymerization mixture is total monomer (2-vinylthiazole), 100 sodium stearate, 5 potassium persulfate, 0.3 laurylmercaptan, 0.4 to 0.7 and water, 200 parts. 

When 1 2 dibromodecane was treated with potassium hydroxide m aqueous ethanol it yielded a mixture of three isomenc compounds of molecular formula CioHi9Br Each of these compounds was converted to 1 decyne on reaction with sodium amide m dimethyl sulfoxide Men tify these three compounds... 

Chloroacetate esters are usually made by removing water from a mixture of chloroacetic acid and the corresponding alcohol. Reaction of alcohol with chloroacetyl chloride is an anhydrous process which Hberates HCl. Chloroacetic acid will react with olefins in the presence of a catalyst to yield chloroacetate esters. Dichloroacetic and trichloroacetic acid esters are also known. These esters are usehil in synthesis. They are more reactive than the parent acids. Ethyl chloroacetate can be converted to sodium fluoroacetate by reaction with potassium fluoride (see Fluorine compounds, organic). Both methyl and ethyl chloroacetate are used as agricultural and pharmaceutical intermediates, specialty solvents, flavors, and fragrances. Methyl chloroacetate and P ionone undergo a Dar2ens reaction to form an intermediate in the synthesis of Vitamin A. Reaction of methyl chloroacetate with ammonia produces chloroacetamide [79-07-2] C2H ClNO (53). 

Reactions of the Hydroxyl Group. The hydroxyl proton of hydroxybenzaldehydes is acidic and reacts with alkahes to form salts. The lithium, sodium, potassium, and copper salts of sahcylaldehyde exist as chelates. The cobalt salt is the most simple oxygen-carrying synthetic chelate compound (33). The stabiUty constants of numerous sahcylaldehyde—metal ion coordination compounds have been measured (34). Both sahcylaldehyde and 4-hydroxybenzaldehyde are readily converted to the corresponding anisaldehyde by reaction with a methyl hahde, methyl sulfate (35—37), or methyl carbonate (38). The reaction shown produces -anisaldehyde [123-11-5] in 93.3% yield. Other ethers can also be made by the use of the appropriate reagent. 

Reactions with Sulfur Compounds. Thiosuccinic anhydride [3194-60-3] is obtained by reaction of diethyl or diphenyl succinate [621-14-7] with potassium hydrogen sulfide followed by acidification (eq. 10). Thiosuccinic anhydride is also obtained from succinic anhydride and hydrogen sulfide under pressure (121). 

Tantalum Compounds. Potassium heptafluorotantalate [16924-00-8] K TaF, is the most important tantalum compound produced at plant scale. This compound is used in large quantities for tantalum metal production. The fluorotantalate is prepared by adding potassium salts such as KCl and KF to the hot aqueous tantalum solution produced by the solvent extraction process. The mixture is then allowed to cool under strictiy controlled conditions to get a crystalline mass having a reproducible particle size distribution. To prevent the formation of oxyfluorides, it is necessary to start with reaction mixtures having an excess of about 5% HF on a wt/wt basis. The acid is added directiy to the reaction mixture or together with the aqueous solution of the potassium compound. Potassium heptafluorotantalate is produced either in a batch process where the quantity of output is about 300—500 kg K TaFy, or by a continuously operated process (28). 

Because of the time and expense involved, biological assays are used primarily for research purposes. The first chemical method for assaying L-ascorbic acid was the titration with 2,6-dichlorophenolindophenol solution (76). This method is not appHcable in the presence of a variety of interfering substances, eg, reduced metal ions, sulfites, tannins, or colored dyes. This 2,6-dichlorophenolindophenol method and other chemical and physiochemical methods are based on the reducing character of L-ascorbic acid (77). Colorimetric reactions with metal ions as weU as other redox systems, eg, potassium hexacyanoferrate(III), methylene blue, chloramine, etc, have been used for the assay, but they are unspecific because of interferences from a large number of reducing substances contained in foods and natural products (78). These methods have been used extensively in fish research (79). A specific photometric method for the assay of vitamin C in biological samples is based on the oxidation of ascorbic acid to dehydroascorbic acid with 2,4-dinitrophenylhydrazine (80). In the microfluorometric method, ascorbic acid is oxidized to dehydroascorbic acid in the presence of charcoal. The oxidized form is reacted with o-phenylenediamine to produce a fluorescent compound that is detected with an excitation maximum of ca 350 nm and an emission maximum of ca 430 nm (81). 

The use of potassium hexafluorosihcate is preferred over sodium hexafluorosihcate because of the lower tendency of the potassium compound to dissociate the lose sihcon tetrafluoride by sublimation. The addition of potassium carbonate or chloride to the fusion mix further reduces this tendency and promotes completion of the reaction. The reaction is conducted in a rotary furnace operating at 700°C. The product is cmshed prior to leaching with acidified hot water. The hot slurry is filtered to remove the sihca, and potassium hexafluorozirconate crystallizes as the solution cools. 

Beryllium, calcium, boron, and aluminum act in a similar manner. Malonic acid is made from monochloroacetic acid by reaction with potassium cyanide followed by hydrolysis. The acid and the intermediate cyanoacetic acid are used for the synthesis of polymethine dyes, synthetic caffeine, and for the manufacture of diethyl malonate, which is used in the synthesis of barbiturates. Most metals dissolve in aqueous potassium cyanide solutions in the presence of oxygen to form complex cyanides (see Coordination compounds). 

Cellobiose was prepared first by Skraup and Konig by the saponification of the octaacetate with alcoholic potassium hydroxide, and the method was improved by Pringsheim and Merkatz.3 Aqueous barium hydroxide also has been employed for the purpose, and methyl alcoholic ammonia has been used extensively for the hydrolysis of carbohydrate acetates. The method of catalytic hydrolysis with a small quantity of sodium methylate was introduced by Zemplen,i who considered the action to be due to the addition of the reagent to the ester-carbonyl groups of the sugar acetate and the decomposition of the addition compound by reaction with alcohol. The present procedure, reported by Zemplen, Gerecs, and Hadacsy, is a considerable improvement over the original method (see Note 2). 

Most commercial liquid ammonia contains up to several ppm of colloidal iron compounds, possibly the iron oxide catalyst commonly used in manufacturing ammonia. Reduction converts these compounds to colloidal iron which strongly catalyzes the reaction between alcohols and sodium and potassium. The reaction of lithium with alcohols is also catalyzed by iron but to a markedly lesser degree. The data in Table 1-4 illustrate the magnitude of these catalytic effects. The data of Table 1-5 emphasize how less than 1 ppm... 

Reaction of the 17-keto compound (54) with potassium acetylide in liquid ammonia gives the 17a-ethynylandrost-5-ene-3) ,I7)5-dioI (55). ° Similar results have been obtained with A-ring aromatic 17-ketones. ... 

Ethynylation of 3j -hydroxy-16a-methyl-5a-androstan-17-one in a mixture of diethylene glycol dimethyl ether and diethylene glycol monoethyl ether in the presence of potassium hydroxide produces two isomeric 17-ethynyl derivatives. This result is not unexpected since molecular models suggest that the steric influence of the 13/ -methyl group is nearly offset by the 16a-methyl group. The presence of a 16a-acetoxy group in the estrone series also leads to the formation of epimeric 17-ethynyl compounds (61) and (62) on reaction with acetylenedimagnesium bromide. 

---