Catalyst potassium carbonate

Derivation By reaction of sugar and methyl stearate in a suitable solvent and with potassium carbonate catalyst. 

Miura et al. reported the first palladium-free Sonogashira coupling reaction of aryl iodides or vinyl iodides with terminal allqmes in the presence of a copper iodide/triphenylphosphine/potassium carbonate catalyst system (Scheme 15.14). o-Iodo-acetanilide derivatives react with l-allg nes smoothly even at room temperature in the presence of a copper iodide/AT-methylpyrrolidine-2-carboxamide catalyst system (Scheme Various... 

The SEs were first synthesized in 1956 by Osipow and coworkers [101] by the transesterification reaction between sucrose and a methyl ester of a fatty acid in the presence of a basic catalyst and dimethyl formamide (Fig. 41). However, because of the toxicity of DMF and other similar solvents, and because of the difficulty in removing DMF, from the reaction product, other methods were investigated. One of these methods, a microemulsion process, used sucrose, the methyl ester of a fatty acid, propylene glycol, sodium soap, and a potassium carbonate catalyst, all entailing time-consuming and costly steps [102,103]. 

Methyl-l-Pen ten e. This olefin is produced commercially by dimeriza tion of propylene in the presence of potassium-based catalysts at 150—160°C and - 10 MPa. Commercial processes utilize several catalysts, such as sodium-promoted potassium carbonate and sodium- and alurninum-promoted potassium hydroxide (12—14) in a fixed-bed reactor. The reaction produces a mixture of C olefins containing 80—85% of 4-methyl- 1-pentene. 

Class (2) reactions are performed in the presence of dilute to concentrated aqueous sodium hydroxide, powdered potassium hydroxide, or, at elevated temperatures, soHd potassium carbonate, depending on the acidity of the substrate. Alkylations are possible in the presence of concentrated NaOH and a PT catalyst for substrates with conventional pX values up to - 23. This includes many C—H acidic compounds such as fiuorene, phenylacetylene, simple ketones, phenylacetonittile. Furthermore, alkylations of N—H, O—H, S—H, and P—H bonds, and ambident anions are weU known. Other basic phase-transfer reactions are hydrolyses, saponifications, isomerizations, H/D exchange, Michael-type additions, aldol, Darzens, and similar... 

Catalysts that do not contain potassium lose activity very quickly because of coke deposition on the surface of the catalyst. Chemical changes that occur when the catalyst is removed from the operating environment make it very difficult to determine the nature of most of the promoter elements during the reaction, but potassium is always found to be present as potassium carbonate in the used catalyst. The other promoters are claimed to increase selectivity and the operating stabiUty of the catalyst. 

Two complementai y reviews of this subject are by Shah et al. AIChE Journal, 28, 353-379 [1982]) and Deckwer (in de Lasa, ed.. Chemical Reactor Design andTechnology, Martinus Nijhoff, 1985, pp. 411-461). Useful comments are made by Doraiswamy and Sharma (Heterogeneous Reactions, Wiley, 1984). Charpentier (in Gianetto and Silveston, eds.. Multiphase Chemical Reactors, Hemisphere, 1986, pp. 104—151) emphasizes parameters of trickle bed and stirred tank reactors. Recommendations based on the literature are made for several design parameters namely, bubble diameter and velocity of rise, gas holdup, interfacial area, mass-transfer coefficients k a and /cl but not /cg, axial liquid-phase dispersion coefficient, and heat-transfer coefficient to the wall. The effect of vessel diameter on these parameters is insignificant when D > 0.15 m (0.49 ft), except for the dispersion coefficient. Application of these correlations is to (1) chlorination of toluene in the presence of FeCl,3 catalyst, (2) absorption of SO9 in aqueous potassium carbonate with arsenite catalyst, and (3) reaction of butene with sulfuric acid to butanol. 

The palladium on carbon catalysts should be dried at room temperature or the carbon may ignite. These catalysts are first dried in air and then over potassium hydroxide (or calcium chloride) in a desiccator. 

After the calculated amount of hydrogen had been absorbed, the catalyst was filtered off, the solution was concentrated in vacuo, and the residual syrup was dissolved in ice water. Benzene was added and the mixture was made alkaline with an excess of concentrated ice cold potassium carbonate solution. The temperature was kept low by continuous addition of ice, and the benzene layer was separated and dried with sodium sulfate. The dried benzene solution was concentrated in vacuo and the residual oil was distil led in vacuo. BP 30 mm = 175°-1 B2°C,... 

A solution containing 741 g (5.0 mols) of 1-phenyl-2-propylidenylhydrazine, 300 g (5.0 mols) of glacial acetic acid and 900 cc of absolute ethanol was subjected to hydrogenation at 1,875 psi of hydrogen in the presence of 10 gof platinum oxide catalyst and at a temperature of 30°C to 50°C (variation due to exothermic reaction). The catalyst was removed by filtration and the solvent and acetic acid were distilled. The residue was taken up In water and made strongly alkaline by the addition of solid potassium hydroxide. The alkaline mixture was extracted with ether and the ether extracts dried with potassium carbonate. The product was collected by fractional distillation, BP B5°C (0.30 mm) yield 512 g (68%). 

Benfield process aqueous potassium carbonate blocking of pores of methanation catalyst by evaporation of potassium carbonate solution... 

Crosslinking resoles in the presence of sodium carbonate or potassium carbonate lead to preferential formation of ortho-ortho methylene linkages.63 Resole networks crosslinked under basic conditions showed that crosslink density depends on the degree of hydroxymethyl substitution, which is affected by the formaldehyde-to-phenol ratio, the reaction time, and the type and concentration of catalyst (uncatalyzed, with 2% NaOH, with 5% NaOH).64 As expected, NaOH accelerated the rates of both hydroxymethyl substitution and methylene ether formation. Significant rate increases were observed for ortho substitutions as die amount of NaOH increased. The para substitution, which does not occur in the absence of the catalyst, formed only in small amounts in the presence of NaOH. 

Many reactions have been shown to benefit from irradiation with ultrasound (ref. 19). We therefore decided to investigate the effect of ultrasound, different catalysts and the presence of solids on Ullmann diaryl ether synthesis. Indeed, sonication of mixtures of a phenol and a bromoaromatic compound, in the absence of solvent and presence of copper (I) iodide as catalyst and potassium carbonate as base, produces good yields of diaryl ethers at relatively low temperatures (Fig. 10) (ref 20). 

A new comparison of the copper and nickel catalysts (Fig. 12) on the arylation of alcohols, using potassium carbonate as base, shows once again the superiority of the nickel catalyst (70 % against 40 % for the copper catalyst). 

Sodium or potassium phenoxide can be carboxylated regioselectively in the para position in high yield by treatment with sodium or potassium carbonate and carbon monoxide. Carbon-14 labeling showed that it is the carbonate carbon that appears in the p-hydroxybenzoic acid product. The CO is converted to sodium or potassium formate. Carbon monoxide has also been used to carboxylate aromatic rings with palladium compoimds as catalysts. In addition, a palladium-catalyzed reaction has been used directly to prepare acyl fluorides ArH —> ArCOF. ... 

Azirines can be prepared in optically enriched form by the asymmetric Neber reaction mediated by Cinchona alkaloids. Thus, ketoxime tosylates 173, derived from 3-oxocarhoxylic esters, are converted to the azirine carboxylic esters 174 in the presence of a large excess of potassium carbonate and a catalytic amount of quinidine. The asymmetric bias is believed to be conferred on the substrate by strong hydrogen bonding via the catalyst hydroxyl group <96JA8491>. 

Mono-, di-, and trisubstituted olefins undergo osmium-catalyzed enantioselective dihydroxylation in the presence of the (R)-proline-substituted hydroquinidine 3.9 to give diols in 67-95% yields and in 78-99% ee.75 Using potassium osmate(VI) as the catalyst and potassium carbonate as the base in a tm-butanol/water mixture as the solvent, olefins are dihydroxylated stereo- and enantioselectively in the presence of 3.9 and potassium ferricyanide with sodium chlorite as the stoichiometric oxidant the yields and enantiomeric excesses of the... 

Jenner investigated the kinetic pressure effect on some specific Michael and Henry reactions and found that the observed activation volumes of the Michael reaction between nitromethane and methyl vinyl ketone are largely dependent on the magnitude of the electrostriction effect, which is highest in the lanthanide-catalyzed reaction and lowest in the base-catalyzed version. In the latter case, the reverse reaction is insensitive to pressure.52 Recently, Kobayashi and co-workers reported a highly efficient Lewis-acid-catalyzed asymmetric Michael addition in water.53 A variety of unsaturated carbonyl derivatives gave selective Michael additions with a-nitrocycloalkanones in water, at room temperature without any added catalyst or in a very dilute aqueous solution of potassium carbonate (Eq. 10.24).54... 

Benzoguanamine has been prepared by the reaction of dicyandiamide with benzonitrile in a sealed tube at 220-230°,2 with an excess of benzonitrile in the presence of piperidine and potassium carbonate,3 with benzonitrile in a solvent in the presence of a basic catalyst,4 and with benzamidine hydrochloride at elevated temperatures.5 It has also been prepared from the reaction of biguanide acetate with benzamidine hydrochloride,5 or of bigua-nide sulfate with benzoyl chloride in an alkaline medium,7 and by the distillation of guanidine benzoate.5... 

In a more recent study, Wang and coworkers have discussed microwave-assisted Suzuki couplings employing a reusable polymer-supported palladium complex [141]. The supported catalyst was prepared from commercial Merrifield polystyrene resin under ultrasound Bonification. In a typical procedure for biaryl synthesis, 1 mmol of the requisite aryl bromide together with 1.1 equivalents of the phenyl-boronic acid, 2.5 equivalents of potassium carbonate, and 10 mg of the polystyrene-... 

---