Carbon-1 3 copolymers

A rubber-like copolymer/carbon fibre composite material has also been prepared [170]. Carbon fibres were added directly to o/w highly concentrated emulsions of block copolymers, such as styrene/butadiene triblocks (SBS), in toluene, followed by precipitation in methanol, drying and hot-pressing. The surfactant was found to aid adhesion between the polymer and carbon fibres. The materials obtained had fairly even distributions of carbon fibres, good mechanical properties and conductivities which increased with increasing carbon fibre length. [Pg.205]

Figure 2.2. General structures of poly(siloxane) liquid phases. A, poly(siloxane) polymer B, poly(silarylene-siloxane) copolymer and C, a poly(carborane-siloxane) copolymer ( = carbon and O = BH).

PolyCetltylene oxide)-b-poly(propylene oxide)-b-poly(etltylene oxide) triblock copolymer carbon dioxide and p-xylene 2002ZHA... [Pg.108]

Dimethylsiloxane/(4-acetylbutyl)methylsiloxane copolymer carbon dioxide 2003K1L... [Pg.402]

Dimethylsiloxane/(3 -ethoxypropyl)methylsiloxane copolymer carbon dioxide 2003KIL... [Pg.402]

Dimethylsiloxane/hydromethylsiloxane copolymer carbon dioxide carbon dioxide 1993HOE 2003KIL... [Pg.402]

Ethylene glycol/propylene glycol copolymer carbon dioxide 2002DRO... [Pg.405]

Methyl methacrylate/2-hydroxyethyl methacrylate copolymer carbon dioxide 1997LEP... [Pg.405]

Poly( 1,1 -dihydroperfluorooctyl acrylate)-b-polystyrene diblock copolymer carbon dioxide 2002TAY... [Pg.406]

Tetrafluoroethylene/hexafluoropropylene copolymer carbon dioxide and snUur hexaflnoride carbon dioxide and triflnoromethane triflnoromethane and snUur hexaflnoride 1999MER 1999MER 1999MER... [Pg.543]

Gasket for sanitary pipe fittings Butadiene-acrylonitrile copolymer Carbon black N550 Silica (powder)... [Pg.426]

Marrs B, Andrews R, Pienkowski D. Multiwall carbon nanotubes enhance the fatigue performance of physiologically maintained methyl methacrylate-styrene copolymer. Carbon 2007 45 2098-104. [Pg.116]

Electrical conductivity measurements have been reported on a wide range of polymers including carbon nanofibre reinforced HOPE [52], carbon black filled LDPE-ethylene methyl acrylate composites [28], carbon black filled HDPE [53], carbon black reinforced PP [27], talc filled PP [54], copper particle modified epoxy resins [55], epoxy and epoxy-haematite nanorod composites [56], polyvinyl pyrrolidone (PVP) and polyvinyl alcohol (PVA) blends [57], polyacrylonitrile based carbon fibre/PC composites [58], PC/MnCli composite films [59], titanocene polyester derivatives of terephthalic acid [60], lithium trifluoromethane sulfonamide doped PS-block-polyethylene oxide (PEO) copolymers [61], boron containing PVA derived ceramic organic semiconductors [62], sodium lanthanum tetrafluoride complexed with PEO [63], PC, acrylonitrile butadiene [64], blends of polyethylene dioxythiophene/ polystyrene sulfonate, PVC and PEO [65], EVA copolymer/carbon fibre conductive composites [66], carbon nanofibre modified thermotropic liquid crystalline polymers [67], PPY [68], PPY/PP/montmorillonite composites [69], carbon fibre reinforced PDMS-PPY composites [29], PANI [70], epoxy resin/PANI dodecylbenzene sulfonic acid blends [71], PANI/PA 6,6 composites [72], carbon fibre EVA composites [66], HDPE carbon fibre nanocomposites [52] and PPS [73]. [Pg.110]

In thermoplastics, carbon fiber compounds have been developed with nylon, polysulfone, thermoplastic, polyester, polyphenylene sulfide, polycarbonate, polypropylene, polyamide-imide, and ethylene/tetrafluoroethylene copolymer. Carbon fiber-reinforced molding compounds are available with carbon fiber contents of various levels such as 20, 30, and 40 weight percent. Nylon 66 molding compounds have also been developed with hybrid combinations of carbon and glass fiber reinforcements. [Pg.240]

Pentad and Tetrad Assignments of NMR Peaks for E/NB Copolymer Carbon Atoms C2/C3 73,75,76... [Pg.437]

Zhang, Z., Wang, W., Li, C., Wei, L., Chen, X., Tong, Y., Mai, K., Lu, X., 2014b. Highly conductive ethylene—vinyl acetate copolymer/carbon nanotube paper for lightweight and fiexible supercapacitors. Journal of Power Sources 248, 1248—1255. [Pg.399]

POSS PCU (Polyhedral oligomeric silsesquioxane and copolymer carbonate-urea urethane... [Pg.368]

Ethylene/propylene copolymer carbon dioxide and C6-fraction solvent 85MCH... [Pg.273]

Acrylonitrile/isoprene copolymer carbon dioxide sol- A(vap) 50AME... [Pg.341]

Poly(butylene oxide)-b-poly(etbylene oxide) diblock copolymer carbon dioxide HPPE 187... [Pg.487]

Three of the resonances are particularly suited to assessment of the isolation of NVC in a copolymer carbon 1 and shielded proton 1 of NVC and the carbonyl carbon of... [Pg.254]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...