Thermoplastic resins polypropylene

This type of adhesive is generally useful in the temperature range where the material is either leathery or mbbery, ie, between the glass-transition temperature and the melt temperature. Hot-melt adhesives are based on thermoplastic polymers that may be compounded or uncompounded ethylene—vinyl acetate copolymers, paraffin waxes, polypropylene, phenoxy resins, styrene—butadiene copolymers, ethylene—ethyl acrylate copolymers, and low, and low density polypropylene are used in the compounded state polyesters, polyamides, and polyurethanes are used in the mosdy uncompounded state. 

Thermoplastics. The highest consumption of color concentrates is in thermoplastic resins, such as low and high density polyethylene, polypropylene, PVC, and polystyrene. Processing techniques for thermoplastics are usually based on dry color dispersion in a compatible resin (36). 

Worldwide propylene production and capacity utilization for 1992 are given in Table 6 (74). The world capacity to produce propylene reached 41.5 X 10 t in 1992 the demand for propylene amounted to 32.3 x 10 t. About 80% of propylene produced worldwide was derived from steam crackers the balance came from refinery operations and propylene dehydrogenation. The manufacture of polypropylene, a thermoplastic resin, accounted for about 45% of the total demand. Demand for other uses included manufacture of acrylonitrile (qv), oxochemicals, propylene oxide (qv), cumene (qv), isopropyl alcohol (see Propyl alcohols), and polygas chemicals. Each of these markets accounted for about 5—15% of the propylene demand in 1992 (Table 7). 

Asbestos fibers have likewise been used in reinforcement of plastics such as poly(vinyl chloride), phenoHcs, polypropylene, nylon, etc. Reinforcement of both thermoset and thermoplastic resins by asbestos fibers has been practiced to develop products for the automotive, electronic, and printing industries. 

Blends of isobutylene polymers with thermoplastic resins are used for toughening these compounds. High density polyethylene and isotactic polypropylene are often modified with 5 to 30 wt % polyisobutylene. At higher elastomer concentration the blends of butyl-type polymers with polyolefins become more mbbery in nature, and these compositions are used as thermoplastic elastomers (98). In some cases, a halobutyl phase is cross-linked as it is dispersed in the polyolefin to produce a highly elastic compound that is processible in thermoplastic mol ding equipment (99) (see Elastomers, synthetic-thermoplastic). ... 

The most common litter item are small pieces of plastics whose lengths are on the order of a few millimeters. An important component are thermoplastic resin pellets and beads that are raw materials, mostly polypropylene and polyethylene, intended for manufecture into commercial items. Loss during ship transport and stormwater runoff are major sources of the pellets and beads to the ocean. Densities of 3500 per km have been reported floating on the surfece in the Sargasso Sea. On the beaches of New Zealand located near industrialized areas, concentrations as high as 100,000 per km are now being observed. The pellets and beads are carried by currents until they are either... 

Common to all reinforced plastics are two ingredients, resin and reinforcement. Resin is an oiganic material, usually of high molecular weight, that can be molded and set into a final shape. Resins are of two basic types. Thermoplastic resins soften upon heating, are shaped in a mold, and retain that shape when cooled. Common examples are nylon, polyethylene, polypropylene, and polycarbonate. Thermosetting resins are placed in a mold and cured by the use of a catalyst, heat, or both, until they harden in the shape of the mold. Common examples are polyester, vinyl ester, epoxies, phenolics, and p olyure thanes. 

The principal kinds of thermoplastic resins include (1) acrylonitrile-butadiene-styrene (ABS) resins (2) acetals (3) acrylics (4) cellulosics (5) chlorinated polyelliers (6) fluorocarbons, sucli as polytelra-fluorclliy lene (TFE), polychlorotrifluoroethylene (CTFE), and fluorinated ethylene propylene (FEP) (7) nylons (polyamides) (8) polycarbonates (9) poly elliylenes (including copolymers) (10) polypropylene (including copolymers) ( ll) polystyrenes and (12) vinyls (polyvinyl chloride). The principal kinds of thermosetting resins include (1) alkyds (2) allylics (3) die aminos (melamine and urea) (4) epoxies (5) phenolics (6) polyesters (7) silicones and (8) urethanes,... 

Fig. 1. US total sales and captive use of selected thermoplastic resins by major market for 2001. Major market volumes are derived from plastic resins sales and captive use data as compiled by VERIS Consulting, LLC and reported by the American Plastics Council s Plastic Industry Producers Statistics Group. Selected thermoplastics are low-density polyethylene, linear low-density polyethylene, high-density polyethylene, polypropylene, nylon, polyvinyl chloride, thermoplastic polyester, engineering resins, acrylonitrile-butadiene-styrene, styrene-acrylonitrile, other styrenics, polystyrene, and styrene butadiene latexes. (Data from ref. 25.)...

Thermoplastic Resins. Polyethylene, polypropylene, polyvinyl chloride, polystyrene and polyimide (9). 

Current research indicates that there is a growing interest in natural fibers. Natural fibers Ifom jute were tested in thermosetting and thermoplastic resins. Lignin fillers were used in phenol-formaldehyde, SBR, SBS, and S1S ° and with good results. The opportunities for applications of natural fibers in industrial products have been the subject of recent reviews. Cellulose whiskers with a high reinforcing value were obtained from wheat straw. " Wood fibers were found applicable to such diverse materials as polypropylene... 

Plastics are not, as many people believe, new materials. Their origin can be traced to 1847 when Shonbein produced the first thermoplastic resin, celluloid, by reaction of cellulose with nitric acid. However, the general acceptance and commercialization of plastics began during the Second World War when natural polymers, such as natural rubber, were in short supply. Thus, polystyrene was developed in 1937, low density polyethylene in 1941, whereas other commodity plastics such as high density polyethylene and polypropylene were introduced in 1957. 

U.S. Pat. No. 4,165,302 [32] describes filled thermoplastic resin compositions comprising LDPE, polypropylene and other resins (in amonnts ranging from 95 to 50% by weight), organic fillers (snch as wood flour), and inorganic fillers (snch as fly ash or calcinm carbonate). This patent is concerned primarily with increasing the melt flow index of filled thermoplastic resin compositions rather than their mechanical properties. 

U.S. Pat. No. 6,833,399 [41] discloses flax bast fibers and flax shives as reinforcing agent for a thermoplastic resin in a composite comprising 15-70% by weight of flax portion and the thermoplastic resin such as polyethylene, polypropylene, PVC, styrene, and other polymers. 

The most widely used thermoplastic resins used in cables are polyvinyl chloride (in various forms), polyethylene (in several forms), polypropylene and polytetrafluoroethylene. 

The melt-blowing process was developed on a small scale at the U.S. Naval Research Laboratories subsequently, larger-scale development was carried out by Exxon and the Beloit Corporation. The process produces nonwoven fibrous webs from any thermoplastic resin but has been used most extensively with polypropylene, which appears to be particularly... 

The matrix material used in polymer-based composites can either be thermoset (epoxies, phenolics) or thermoplastic resins (low density polyethylene, high density polyethylene, polypropylene, nylon, acrylics). The filler or reinforcing agent can be chosen according to the desired properties. The properties of polymer matrix composites are determined by properties, orientation and concentration of fibers and properties of matrix. 

Generally synthetic resins are grouped into two categories thermoplastic synthetic resins and thermosetting synthetic resins [6]. Thermoplastic resins can be softened and reformed by applying heat and pressure even after being set in a certain shape. Examples of this type of synthetic resin include polyethylene and polypropylene. These resins (polymers) are used in packaging films, molded containers, and for automotive components. 

The most common thermosetting laminating resins are phenolics, melamines, epoxies, polyesters, silicones, and polyimides. Thermoplastic resins used in making laminates include polysulfone, polyphenylene sulfide, polyetheretherketone, polyamide-imide, polybutylene terephthalate, nylon 6, and polypropylene. 

---