Polymeric materials styrenic polymers

A final application is in blends with thermoplastics or other polymeric materials. Styrenic block copolymers are technologically compatible with a surprisingly wide range of other polymers. Blends with many other thermoplastics have improved impact resistance. These block copolymers can also be used as compatibilizers— that is, they can produce useful products from blends of thermoplastics that otherwise have poor properties [6]. 

Other commercially relevant monomers have also been modeled in this study, including acrylates, styrene, and vinyl chloride.55 Symmetrical a,dienes substituted with the appropriate pendant functional group are polymerized via ADMET and utilized to model ethylene-styrene, ethylene-vinyl chloride, and ethylene-methyl acrylate copolymers. Since these models have perfect microstructure repeat units, they are a useful tool to study the effects of the functionality on the physical properties of these industrially important materials. The polymers produced have molecular weights in the range of 20,000-60,000, well within the range necessary to possess similar properties to commercial high-molecular-weight material. 

Nickel and palladium react with a number of olefins other than ethylene, to afford a wide range of binary complexes. With styrene (11), Ni atoms react at 77 K to form tris(styrene)Ni(0), a red-brown solid that decomposes at -20 °C. The ability of nickel atoms to coordinate three olefins with a bulky phenyl substituent illustrates that the steric and electronic effects (54,141) responsible for the stability of a tris (planar) coordination are not sufficiently great to preclude formation of a tris complex rather than a bis (olefin) species as the highest-stoichiometry complex. In contrast to the nickel-atom reaction, chromium atoms react (11) with styrene, to form both polystyrene and an intractable material in which chromium is bonded to polystyrene. It would be interesting to ascertain whether such a polymeric material might have any catal3dic activity, in view of the current interest in polymer-sup-ported catalysts (51). 

The synthetic methods and chemical characterization data for the various polymeric materials to be discussed in this work have been reported elsewhere [6-8]. In some cases copolymerization of the unchlorinated oxazolidinone monomer with other common monomers such as acrylonitrile, vinyl chloride, styrene, and vinyl acetate, using potassium persulfate as an initiator, was performed. In other cases the unchlorinated oxazolidinone monomer was grafted onto polymers such as poly(acrylonitrile), poly(vinyl chloride), poly(styrene), poly(vinyl acetate), and poly(vinyl alcohol), again using potassium persulfate as an initiator. 

The dispersion polymerization of styrene in supercritical CO2 using amphiphilic diblock copolymers to impart steric stabilization has been investigated. Lipophilic, C02-insoluble materials can be effectively emulsified in carbon dioxide using amphiphilic diblock copolymer surfactants. The resulting high yield (> 90%) of polystyrene is obtained in the form of a stable polymer colloid comprised of submicron-sized particles (Canelas et al., 1996). 

The resins studied (Rohm and Haas and Ionac) were all functionalized, cross-linked, styrene polymers with the exception of poly (4-vinyl-pyridine). Porous, macroreticular resins included the polymeric analogs of N,2V-dimethylbenzylamine (A21 polyDMBA, Rohm and Haas), N,N-dimethylaniline, and l-phenyl-2- (N,2V-dimethylamino) ethane (poly-Alipham), The last two materials were prepared in this laboratory. Nitrogen content of the porous resins was 4.1, 2.5, and 2.6 mequiv/gram, respectively. Poly(4-vinylpyridine) (6.9 mequiv/gram) had a gel-type structure. 

This observation has been used by Kargin, and Plate (127) who initiated polymerization and grafting with the help of mechanically disrupted inorganic materials. Many metals, oxides, and salts which never normally act as initiators, when mechanically disrupted, are able to initiate polymerization of styrene, methyl methacrylate, acrylonitrile, and other vinyl monomers. The surface of the active inorganic substance can also be used as a site for grafting to already existing polymer chains if joint dispersion of polymer and monomer, such as cellulose and styrene, is performed. 

Styrene and Vinyl Monomer, Polymer, and Copolymer Sulfonates. The incorporation of sulfonates into polymeric material can occur either after polymerization or at the monomer stage. The sulfonic acid group is strongly acidic and can therefore be used to functionalize the polymer backbone to the desired degree. The ability of sulfonic acids to exchange counterions has made these polymers prominent in industrial water treatment applications, separators in electrochemical cells, and selective membranes of many types. 

In practice, all inhibitors show some deviations from ideal behaviour for example when diphenylpicrylhydrazyl is used as a radical scavenger it is converted to products which are reactive towards radicals as shown by the fact that polymerizations occurring after the induction periods are obviously retarded. The use of 14C-hydrazyl in the radical polymerization of styrene has shown that substantial quantities of the material are combined in the polymer 36). 

Another widely used copolymer is high impact polystyrene (PS-HI), which is formed by grafting polystyrene to polybutadiene. Again, if styrene and butadiene are randomly copolymerized, the resulting material is an elastomer called styrene-butadiene-rubber (SBR). Another classic example of copolymerization is the terpolymer acrylonitrile-butadiene-styrene (ABS). Polymer blends belong to another family of polymeric materials which are made by mixing or blending two or more polymers to enhance the physical properties of each individual component. Common polymer blends include PP-PC, PVC-ABS, PE-PTFE and PC-ABS. 

---