Polymer dielectric properties

Electronic impedance spectroscopy (EIS) is used to measure the polymer dielectric properties and the changes in these properties with exposure time. This is based on the interaction of an external field with the electric dipole moment of the sample, often expressed by permittivity. Dielectric thermal analysis (DETA) measures the permittivity, capacitance and dielectric loss of a polymer sample under an oscillating electric field as a function of temperature. The dielectric properties of a blend system in general depend on structure, crystallinity, morphology and additives. " ... 

Ah initio calculations of polymer properties are either simulations of oligomers or band-structure calculations. Properties often computed with ah initio methods are conformational energies, polarizability, hyperpolarizability, optical properties, dielectric properties, and charge distributions. Ah initio calculations are also used as a spot check to verify the accuracy of molecular mechanics methods for the polymer of interest. Such calculations are used to parameterize molecular mechanics force fields when existing methods are insulficient, which does not happen too often. 

Finally, the dielectric properties of a nonpolar polymer are modified by inclusion of even small amounts of a polar comonomer. In coatings applications the presence of polar repeat units in an otherwise nonpolar polymer reduces the tendency for static buildup during manufacture, printing, and ultimate use. On the other hand, in dielectric applications this increases the power loss and must be kept to a minimum, even to the exclusion of polar initiator fragments. 

Some electrical properties are shown in Table 3. Values of other parameters have been pubflshed (146). Polymorphism of the PVDF chains and the orientation of the two distinct dipole groups, —CF2— and —CH2—, rather than trapped space charges (147) contribute to the exceptional dielectric properties and the extraordinarily large piezoelectric and pyroelectric activity of the polymer (146,148,149). 

The dielectric properties of polar materials will depend on whether or not the dipoles are attached to the main chain. When they are, dipole polarisation will depend on segmental mobility and is thus low at temperatures below the glass transition temperatures. Such polymers are therefore better insulators below the glass temperature than above it. 

By the time the next overview of electrical properties of polymers was published (Blythe 1979), besides a detailed treatment of dielectric properties it included a chapter on conduction, both ionic and electronic. To take ionic conduction first, ion-exchange membranes as separation tools for electrolytes go back a long way historically, to the beginning of the twentieth century a polymeric membrane semipermeable to ions was first used in 1950 for the desalination of water (Jusa and McRae 1950). This kind of membrane is surveyed in detail by Strathmann (1994). Much more recently, highly developed polymeric membranes began to be used as electrolytes for experimental rechargeable batteries and, with particular success, for fuel cells. This important use is further discussed in Chapter 11. 

POLYIMIDES AND OTHER HIGH-TEMPERATURE POLYMERS 5.2.2.3 Dielectric Properties and Moisture Uptake... 

Phthalazinone, 355 synthesis of, 356 Phthalic anhydride, 101 Phthalic anhydride-glycerol reaction, 19 Physical properties. See also Barrier properties Dielectric properties Mechanical properties Molecular weight Optical properties Structure-property relationships Thermal properties of aliphatic polyesters, 40-44 of aromatic-aliphatic polyesters, 44-47 of aromatic polyesters, 47-53 of aromatic polymers, 273-274 of epoxy-phenol networks, 413-416 molecular weight and, 3 of PBT, PEN, and PTT, 44-46 of polyester-ether thermoplastic elastomers, 54 of polyesters, 32-60 of polyimides, 273-287 of polymers, 3... 

Synthetic polymers are best known for their insulating dielectric properties which have been exploited for numerous applications in both the electrical and electronic industries. It was found recently that some polymers can also be rendered conductive by an appropriate treatment, thus opening the way to a new field of applications of these materials (2, 3). Usually, electrical conductivity is obtained by doping a neutral polymer, rich in unsaturation, with donor or acceptor molecules. These polymers are rather difficult to synthesize, which makes them very expensive besides they are often sensitive to environmental agents, like oxygen or humidity, thus restricting their practical use to oxygen-free systems. 

For preparation of dipolar polymers with dielectric properties and nonlinear optical applications, a piperidino-substituted a-cyanocinnamic acid was polycondensed with CDI.[551,tl54]... 

Nonlinear Electro-optic and Dielectric Properties of Flexible Polymers... 

The nonlinear optical and dielectric properties of polymers find increasing use in devices, such as cladding and coatings for optical fibres, piezoelectric and optical fibre sensors, frequency doublers, and thin films for integrated optics applications. It is therefore important to understand the dielectric, optical and mechanical response of polymeric materials to optimize their usage. The parameters that are important to evaluate these properties of polymers are their dipole moment polarizability a, hyperpolarizabilities 0... 

Calculations on other polymers and copolymers (7) show that the NLDE is sensitive to chain length, tacticity, copolymerization, and the details of the RIS model. Thus the NLDE is potentially useful to characterize the dielectric properties, microstructures and conformations of polymers. 

We have shown in this paper the relationships between the fundamental electrical parameters, such as the dipole moment, polarizability and hyperpolarizability, and the conformations of flexible polymers which are manifested in a number of their electrooptic and dielectric properties. These include the Kerr effect, dielectric polarization and saturation, electric field induced light scattering and second harmonic generation. Our experimental and theoretical studies of the Kerr effect show that it is very useful for the characterization of polymer microstructure. Our theoretical studies of the NLDE, EFLS and EFSHG also show that these effects are potentially useful, but there are very few experimental results reported in the literature with which to test the calculations. More experimental studies are needed to further our understanding of the nonlinear electrooptic and dielectric properties of flexible polymers. 

Water absorption can also cause significant changes in the permittivity and must be considered when describing dielectric behavior. Water, with a dielectric constant of 78 at 25°C, can easily impact the dielectric properties at relatively low absorptions owing to the dipolar polarizability contribution. However, the electronic polarizability is actually lower than solid state polymers. The index of refraction at 25°C for pure water is 1.33, which, applying Maxwell s relationship, yields a dielectric constant of 1.76. Therefore, water absorption may actually act to decrease the dielectric constant at optical frequencies. This is an area that will be explored with future experiments involving water absorption and index measurements. 

This research was an attempt to develop new polymers with the mechanical properties of polyarylene ethers and the dielectric properties of fluoropolymers. After initially testing the viability of the [2n+ 2n] cyclodimerization reaction for preparing high-molecular-weight polymers and testing the dielectric properties of these polymers, two polymers (one thermoplastic and one thermoset) were prepared in larger quantities to evaluate the thermal and mechanical performance of these novel compositions. The high Te thermoset was also quantitatively tested for thermal/oxidative stability. 

These postulated mechanisms3 are consistent with the observed temperature dependence of the insulator dielectric properties. Arrhenius relations characterizing activated processes often govern the temperature dependence of resistivity. This behavior is clearly distinct from that of conductors, whose resistivity increases with temperature. In short, polymer response to an external field comprises both dipolar and ionic contributions. Table 18.2 gives values of dielectric strength for selected materials. Polymers are considered to possess... 

Samples of one polymer, prepared from 4,4 -biphenol, appeared to have good mechanical flexibility and toughness as well as good dielectric properties. This polymer was prepared in sufficient quantity to allow a more extensive evaluation of the polymer properties, including thermal, mechanical, and dielectric properties. Results of the tests are listed in Table 3.2. 

Polymer Chemistry, Recent Advances in (Szwarc). Polymer Solutions, Dilute, Dielectric Properties of (de... 

P.Y.17 may be used for mass coloration and also to print PVC film. For these purposes, P.Y.17 is frequently prepared on a VC/VAc (vinyl chloride/vinyl acetate) mixed polymer basis. Good dispersibility in plastics makes these preparations suitable even for thin films. The dielectrical properties of P.Y.17 allow its application in PVC cable insulations. 

Yamawaki, Y., Morita, M. and Sakata, I. (1990). Mechanical and dielectric properties of cyanoethylated wood. Journal of Applied Polymer Science, 40(9-10), 1757-1769. 

---