Polyamide-polyphenylene sulfone

As weU as in edible-oil processing, the use of organic solvents is also relevant in the synthesis of amino adds and their derivatives. In producing dipeptides such as L-aspartyl-L-phenylalanine methyl ester, better known as aspartame, from amino acids and derivatives via enzymatic processes in organic solvents such as butyl acetate and 2-methyl-2-butanol, unreacted amino acids should be recycled after the synthesis to make the process more efficient. Reddy et al. tested several commercial membranes and found a polyamide-polyphenylene sulfone composite to be promising for this appHcation. However, further research is stiU needed here to apply other membrane materials, which are more resistant towards solvents like butyl acetate [33]. 

Fortunately, the deficiencies of both the classic thermosets and general purpose thermoplastics have been overcome by the commercialization of a series of engineering plastics including polyacetals, polyamides, polycarbonate, polyphenylene oxide, polyaryl esters, polyaryl sulfones, polyphenylene sulfide, polyether ether ketones and polylmides. Many improvements in performance and processing of these new polymers may be anticipated through copolymerization, blending and the use of reinforcements. 

ABS Acrylontrile-butadiene-styrene EVA Ethylene-vinyl acetate PAI Polyamide-imide PC Polycarbonate PE Polyethylene PEEK Polyether ether ketone PES Polyether sulfone PET Polyethylene terephthalate PI Polyimide PMMA Polymethyl methacrylate PPO Polyphenylene oxide PPS Polyphenyl sulfide XLPE Crosslinked polyethylene Source Author s own files ... 

Figure 1 Polymer interpretation chart. PAI, polyamideimide PC, polycarbonate UP, unsaturated polyester PDAP, diarylate phtalate resin VC-VAc, vinyl chloride-vinyl acetate copolymer PVAc, polyvinyl acetate PVFM, polyvinyl formal PUR, polyurethane PA, polyamide PMA, methacrylate ester polymer EVA, ethylene-vinyl acetate copolymer PF, phenol resin EP, epoxide resin PS, polystyrene ABS, acrylonitrile-butadiene-styrene copolymer PPO, polyphenylene oxide P-SULFONE, poly-sulfone PA, polyamide UF, urea resin CN, nitrocellulose PVA, polyvinyl acetate MC, methyl cellulose MF, melamine resin PAN, polyacrylonitrile PVC, polyvinyl chloride PVF, polyvinyl fluoride CR, polychloroprene CHR, polyepichlorohydrin SI, polymethylsiloxane POM, polyoxy-methylene PTFE, polytetrafluoroethylene MOD-PP, modified PP EPT, ethylene-propylene terpolymer EPR, ethylene-propylene rubber PI, polyisoprene BR, butyl rubber PMP, poly(4-methyl pentene-1) PE, poly(ethylene) PB, poly(butene-l). (Adapted from Ref. 22, p. 50.)...

Some measurements of this property have been made in a range of electrically conducting polymers. These include epoxy resin/polyaniline-dodecylbenzene sulfonic acid blends [38], polystyrene-black polyphenylene oxide copolymers [38], semiconductor-based polypyrroles [33], titanocene polyesters [40], boron-containing polyvinyl alcohol [41], copper-filled epoxy resin [42], polyethylidene dioxy thiophene-polystyrene sulfonate, polyvinyl chloride, polyethylene oxide [43], polycarbonate/acrylonitrile-butadiene-styrene composites [44], polyethylene oxide complexes with sodium lanthanum tetra-fluoride [45], chlorine-substituted polyaniline [46], polyvinyl pyrolidine-polyvinyl alcohol coupled with potassium bromate tetrafluoromethane sulfonamide [47], doped polystyrene block polyethylene [38, 39], polypyrrole [48], polyaniline-polyamide composites [49], and polydimethyl siloxane-polypyrrole composites [50]. 

During the last 40 years, ABS blends with most polymers have been patented. For example, wdth PVC in 1951, PC (introduced in 1958) in 1960, polyamide (PA-6) a year later [Grabowski, 1961a], polysulfone (PSF) in 1964, CPE in 1965, PET in 1968, polyarylether sulfone (PAES) and styrene-maleic anhydride (SMA) in 1969 (the blend is one of two resins called high heat ABS — the other being ABS in which at least a part of styrene was replaced with p-methylstyrene), polyethersulfone (PES) in 1970, polyarylates (PAr) in 1971, polyurethane in 1976, polyarylether (PPE or PAE) in 1982, with polyphenylene sulfide (PPS) in 1991, etc. 

FTIR spectroscopy has been applied in the study of polymer blends including Neoprene rubber, chlorosulfonated PE, nitrile rubber, polyvinyl chloride (PVC) containing carbon black and other fillers [86], Nylon 6 inorganic [87], polyhydroxyether sulfone/poly(N-vinyl pyrrolidone) [88], graphite-based low-density polyethylene [89], caprolactone/Nafion blends [90], polybutylene terephthalate/polyamide [91], polyphenylene sulfide/acrylonitrile - butadiene - styrene [92], PMMA/polypyrrol [93], and lower or high performance liquid chromatography (LDPE/HDPE) [94]. 

Most polymers used today are thermoplastics. Poiypropylene (PP), polyethylene (PE), polyethylene terephthalate (PET), and polystyrene (PS) often find application as low-end consumer items, packaging or others. Technical parts are produced mostly from acrylonitrile-butadiene-styrene-copolymer (ABS), polyamide (PA), polybutylene terephthalate (PBT), polyoxymethylene (POM), polyether sulfone (PES), polycarbonate (PC), polyphenylene sulfide (PPS), polytetrafluoroethylene (PTFE), polyether ether ketone (PEEK), or polyimide (PI). Polyvinyl chloride (PVC) is a material often used in building construction, especially for roofing membranes, window frames, and pipes, and its properties (rigid or flexible) are generally modified by additives. 

The long-term, continuous-use temperature resistance ranges from about 120 to 125 °C, as measured by the UL 746B relative thermal index (RTI) test, which places its performance closer to that of the engineermg polymers such as polybutylene terephthalate (PBT), liquid crystal polymers (LCP), and polyethylene terephthalate (PET) than to that of performance polymers such as polyphenylene sulfide (PPS), polyether sulfone (PES), and polyamide imide (PAI). 

An ultra class of high performing polymers (CUT > 240 °C) including polybenzimidazole (PBI), polyetheretherketone (PEEK), polyimide, polyamide-imide, polyether-imide (PI, PAI, PEI), high temperature sulfone (HTS), self-reinforced polyphenylene ether (SRP),etc. 

---