Polyacrylonitrile nanofibers

S. F. Fennessey, J. R.. Farris. 2004. Fabrication of aligned and molecularly oriented elecfrospun polyacrylonitrile nanofibers and the mechanical behavior of their twisted yams. Polymer, 45.pp. 4217- 4225. 

Hou, H.Q., Ge, J.J., and Zeng, J., 2005. Electrospun polyacrylonitrile nanofibers containing a high concentration of well-aligned multiwall carbon nanotubes, Chem. Mater., 17(5), pp. 967-973. 

Esrafilzadeh, D. M. Morshed, and H. Tavanai, An investigation on the stabilization of special polyacrylonitrile nanofibers as carbon or activated carbon nanofiber precursor. Synthetic Metals. 2009,159(3), 261-212. 

Cho, T., Sakai, T., Iknase, S., Kimura, K., Kondo, Y, Tarao, T., Tanaka, M., 2007. Electrochemical performances of polyacrylonitrile nanofiber-based nonwoven separator for lithium-ion battery. Electrochem. Solid-State Lett. 10, A159-A162. 

Zhou Z., Lai C., Zhang L., Qian Y, Hou H., Reneker D. H., and Fong H., Development of carbon nanofibers from aligned electrospun polyacrylonitrile nanofiber bundles and characterization of their microstructural, electrical, and mechanical properties. Polymer, 2009, 50,2999-3006. 

FIGURE 2.35 SEM micrograph of polypyrrole-coated electrospun polyacrylonitrile nanofibers. 

Yordem, O.S., Papila, M. and Menceloglu, YZ. 2008. Effects of electrospinning parameters on polyacrylonitrile nanofiber diameter An investigation by response surface methodology. 34-44. 

Zhang, H., Nie, H., Yu, D., Wu, C., Zhang, Y, White, C.J.B. and Zhu, L. 2010b. Surface modification of electrospun polyacrylonitrile nanofiber towards developing an affinity membrane for bromelain adsorption, 256 141-147. 

Zhou, Z. et al. (2009). Development of Carbon Nanofibers from Ahgned Electrospun Polyacrylonitrile Nanofiber Bundles and Characterization of Their Microstructural, Electrical, and Mechanical Properties. Pot m 50, 2999—3006. 

Liu Z, Zhou C, Zheng B, Qian L, Mo Y, Luo F, Shi Y, Choi MMF, Xiao D (2011) In situ synthesis of gold nanoparticles on porous polyacrylonitrile nanofibers for sensing applications. Analyst 136 4545 551... 

Su C, Tong Y, Zhang M, Zhang Y, Shao C (2013) Ti02 nanoparticles immobilized on polyacrylonitrile nanofibers mats a flexible and recyclable photocatalyst for phenol degradation. RSC Adv 3 7503-7512... 

Yu DG, Zhou J, Chatterton NP, Li Y, Huang J, Wang X (2012) Polyacrylonitrile nanofibers coated with silver nanoparticles using a modified coaxial electrospinning process. Int J Nanomed 7 5725-5732... 

Zhou Z, Liu K, Lai C, Zhang L, Li J, Hou H, Reneker D H and Fong H (2010) Graphitic carbon nanofibers developed from bundles of aligned electrospun polyacrylonitrile nanofibers containing phosphoric acid. Polymer 51 2360-2367. 

Liao C-C, Wang C-C, Chen C-Y and Lai W-J (2011) Stretching-induced orientation of polyacrylonitrile nanofibers by an electrically rotating viscoelastic jet for improving the mechanical properties, Polymer 52 2263-2275. 

COMPARISON OF ANN WITH RSM IN PREDICTING CONTACT ANGLE OF ELECTROSPUN POLYACRYLONITRILE NANOFIBER MAT... 

Kima, J. Ganapathya, H. Hongb, S. Lim, Y. Preparation of polyacrylonitrile nanofibers as a precursor of carbon nanofibers by supercritical fluid process. J. Supercritical Fluids 2008,47 103-107. 

Wang, T, S. Kumar, Electrospinning of Polyacrylonitrile Nanofibers. Journal of applied polymer science, 2006, 102(2), 1023-1029. 

A composite separator made from three layers a polyolefin fiber support layer, a ceramic coating layer, and a polyacrylonitrile nanofiber layer.The separator possesses high porosity, small pore size, and high tensile strength. The cells showed better rate capabilities, and in a hot box at 150°C, showed higher thermal stability than cells made with conventional separators. 

Feng, L., Li, S.H., Li, H.J., Zhai, J., Song, Y.L., Jiang, L., Zhu, D.B., 2002. Super-hydrophobic surface of aligned polyacrylonitrile nanofibers. Angewandte Chemie-Intemational Edition... 

---