Poly , safety

Resins formed from the reaction of poly(vinyl alcohol) with aldehydes. The formal derivative (from methanal) is used in wire coatings and adhesives and the bulyral (from butanal) is used in metal paints, wood-sealers, adhesives and in safety glass interlayers. 

Prepared generally by ester interchange from polyvinylacelate (ethanoate) using methanol and base also formed by hydrolysis of the acetate by NaOH and water. The properties of the poly(vinyl alcohol) depend upon the structure of the original polyvinyl acetate. Forms copolymers. Used as a size in the textile industry, in aqueous adhesives, in the production of polyvinyl acetates (e.g. butynal) for safety glasses. U.S. production 1980... 

In addition to carbon and glass fibers ia composites, aramid and polyimide fibers are also used ia conjunction with epoxy resias. Safety requirements by the U.S. Federal Aeronautics Administration (FAA) have led to the development of flame- and heat-resistant seals and stmctural components ia civiUan aircraft cabias. Wool blend fabrics containing aramids, poly(phenylene sulfide), EDF, and other inherently flame-resistant fibers and fabrics containing only these highly heat- and flame-resistant fibers are the types most frequently used ia these appHcations. 

Most laminated safety glarings are glass—PVB—glass tdlayer composites, but bullet- and projectile-resistant laminates. Laminates for other specialty uses maybe made with more than three layers. In addition to glass, poly(ethylene terephthalate) (PET), acryUc, and polycarbonate stmctural components (92) are used in specialty laminated glaring products. 

Poly(vinyl butyral), prepared by reacting poly(vinyl alcohol) with -butyraldehyde, finds wide appHcation as the interlayer in safety glass and as an adhesive for hydrophilic surfaces (161). Another example is the reaction of poly(vinyl alcohol) with formaldehyde to form poly(vinyl formal), used in the production of synthetic fibers and sponges (162). 

Poly(Vinyl Chloride), Material safety data sheets. The Geon Co., Avon Lake, Ohio, 1996. 

Salts of neodecanoic acid have been used in the preparation of supported catalysts, such as silver neodecanoate for the preparation of ethylene oxide catalysts (119), and the nickel soap in the preparation of a hydrogenation catalyst (120). Metal neodecanoates, such as magnesium, lead, calcium, and zinc, are used to improve the adherence of plasticized poly(vinyl butyral) sheet to safety glass in car windshields (121). Platinum complexes using neodecanoic acid have been studied for antitumor activity (122). Neodecanoic acid and its esters are used in cosmetics as emoUients, emulsifiers, and solubilizers (77,123,124). Zinc or copper salts of neoacids are used as preservatives for wood (125). 

Plasticizers. Plasticizers are materials that soften and flexibilize inherently rigid, and even britde polymers. Organic esters are widely used as plasticizers in polymers (97,98). These esters include the benzoats, phthalates, terephthalates, and trimeUitates, and aUphatic dibasic acid esters. Eor example, triethylene glycol bis(2-ethylbutyrate) [95-08-9] is a plasticizer for poly(vinyl butyral) [63148-65-2] which is used in laminated safety glass (see Vinyl POLYMERS, poly(vinyl acetals)). Di(2-ethyUiexyl)phthalate [117-81-7] (DOP) is a preeminent plasticizer. Variation of acid and/or alcohol component(s) modifies the efficacy of the resultant ester as a plasticizer. In phthalate plasticizers, molecular sizes of the alcohol moiety can be varied from methyl to tridecyl to control permanence, compatibiUty, and efficiency branched (eg, 2-ethylhexyl, isodecyl) for rapid absorption and fusion linear (C6—Cll) for low temperature flexibiUty and low volatility and aromatic (benzyl) for solvating. Terephthalates are recognized for their migration resistance, and trimeUitates for their low volatility in plasticizer appHcations. 

As a safety glass interleaver, poly(vinyI butyral) (Butacite, Saflex) is extensively used because of its high adhesion to glass, toughness, light stability, clarity and moisture insensitivity. 

C icci, R. H. V., 1980, A Methodology for Evaluating the Probability for Fire Loss of Nuclear Power Plant Safety Functions, Ph.D. Thesis at Rensselaer Poly. Inst., Troy, NY. 

Poly(aryloxyphosphazene) elastomers can be cured with peroxides, sulfur and radiation. The resulting vulcanizates are resistant to attack by moisture and oils and have been found to have desirable characteristics for electrical insulation applications where fire safety is a concern (Table II) (12). Fire resistant, low smoke, closed cell foams with excellent properties (Table III) have also been developed from poly(aryloxyphosphazene) elastomers (13). Applications for these foams, which can be produced as either slabstock or tube stock, are being developed for military, aerospace and commercial uses. (See Table II and III.)... 

At AWE, the Lewis acid-catalyzed bulk polymerization route has been the main synthesis route to poly(m-carborane-siloxane) elastomers. Our selection has been based on considerations of safety, availability of key reagents, and ease of scale-up operations. An understanding of the physical and chemical properties of these materials, and how these properties can be modified through the synthesis process, is essential in order to develop materials of controlled characteristics. 

The endothermic nitride is susceptible to explosive decomposition on friction, shock or heating above 100°C [1], Explosion is violent if initiated by a detonator [2], Sensitivity toward heat and shock increases with purity. Preparative precautions have been detailed [3], and further improvements in safety procedures and handling described [4], An improved plasma pyrolysis procedure to produce poly (sulfur nitride) films has been described [5], Light crushing of a small sample of impure material (m.p. below 160°C, supposedly of relatively low sensitivity) prior to purification by sublimation led to a violent explosion [6] and a restatement of the need [4] for adequate precautions. Explosive sensitivity tests have shown it to be more sensitive to impact and friction than is lead azide, used in detonators. Spark-sensitivity is, however, relatively low [7],... 

The suitability of a bacterium for poly(3HB) production on an industrial scale depends on many different factors such as stability and safety of the organism, growth and accumulation rates, achievable cell densities and poly(3HB) contents, extractability of the polymer, molecular weights of accumulated poly(3HB), range of utilizable carbon sources, costs of the carbon source and the other components of the medium, and occurrence of byproducts [11]. 

R. eutropha is actually an autotrophic hydrogen-oxidizing bacterium which can also produce poly(3HB) from C02, H2, and 02 [34]. The critical factor in such autotrophic cultivation processes is to avoid possible gas explosions. Therefore, a recycled gas, closed circuit culture system equipped with several safety features was developed and the oxygen concentration in the substrate gas phase was kept below the lower limit for gas explosions. A bacterial biomass of 91.3 g 1 1 has been achieved and the poly(3HB) content reached up to 67% per cell dry weight under these oxygen-limited conditions [35]. 

---