Poly patterns

Several silk fibroin genes have been cloned and sequenced and they all show a similar sequence pattern variable domains at the N- and C-termini flank a large region of repetitive short sequences of alternating poly-Ala (8 to 10 residues) and Gly-Gly-X repeats (where X is usually Ser, Tyr, or Gin). This middle region varies in length and may comprise up to 800 residues. 

Whereas the cleavage of /S-poly(L-malate) at neutral pH is at random [2], alkaline hydrolysis reveals characteristic patterns of the cleavage products, which is due to nonrandom chain scission (Fig. 3). The phenomenon is explained by an autocatalytic ester hydrolysis. Assuming that one (or both) of the polymer ends bends... 

As an indication of the changes in deformation modes that can be produced in ionomers by increase of ion content, consider poly(styrene-co-sodium methacrylate). In ionomers of low ion content, the only observed deformation mode in strained thin films cast from tetra hydrofuran (THF), a nonpolar solvent, is localized crazing. But for ion contents near to or above the critical value of about 6 mol%, both crazing and shear deformation bands have been observed. This is demonstrated in the transmission electron microscope (TEM) scan of Fig. 3 for an ionomer of 8.2 mol% ion content. Somewhat similar deformation patterns have also been observed in a Na-SPS ionomer having an ion content of 7.5 mol%. Clearly, in both of these ionomers, the presence of a... 

Data of Figs 8-10 give a simple pattern of yield stress being independent of the viscosity of monodisperse polymers, indicating that yield stress is determined only by the structure of a filler. However, it turned out that if we go over from mono- to poly-disperse polymers of one row, yield stress estimated by a flow curve, changes by tens of times [7]. This result is quite unexpected and can be explained only presumably by some qualitative considerations. Since in case of both mono- and polydisperse polymers yield stress is independent of viscosity, probably, the decisive role is played by more fine effects. Here, possibly, the same qualitative differences of relaxation properties of mono- and polydisperse polymers, which are known as regards their viscosity properties [1]. 

Just as an example, the X-ray diffraction patterns of compression moulded samples of PVDF, poly(vinylfluoride), and of some VDF-VF copolymers of different compositions are shown in Fig. 17 [90]. The degrees of crystallinity of the copolymer samples (40-50%) are high and analogous to those of the homopolymer samples. This indicates a nearly perfect isomorphism between the VF and VDF monomeric units [90, 96], The diffraction patterns and the crystal structures of the copolymers are similar to those of PVF, which are in turn similar to the X-ray pattern and crystalline structure of the P form of PVDF. On the contrary, the X-ray pattern of a PVDF sample crystallized under the same conditions (Fig. 17 a) is completely different, that is typical of the non-piezoelectric a form [90]. 

The addition of ammonia to aldehydes or ketones does not generally give useful products. According to the pattern followed by analogous nucleophiles, the initial products would be expected to be hemiaminals, but these compounds are generally unstable. Most imines with a hydrogen on the nitrogen spontaneously poly-... 

Puskas, J.E., Pattern, W.E., Wetmore, P.M., and Krukonis, A. Multiarm-star polyisobutylene-polystyrene thermoplastic elastomers from a novel multifunctional initiator, Polym. Mater. Set Eng., 82,42 3, 1999. Brister, L.B., Puskas, J.E., and Tzaras, E. Star-branched PIB/poly(p-t-bu-Styrene) block copolymers from a novel epoxide initiator, Polym. Prepr., 40, 141-142, 1999. 

Barrett EW, Phelps MVB, Silva RJ, Gaumond RP, and Allcock HR. Patterning poly(organophospha-zenes) for selective cell adhesion applications. Biomacromolecules, 2005, 6, 1689-1697. 

FIG. 12 X-ray diffraction patterns of poly(dimethylsiloxane)-clay nanocomposites prepared from dimethyl ditallowammonium-exchanged montmorillonite as a function of the weight ratio of water to silicate. (From Ref. 67.)... 

Other hand, when an equimolar mixture of 2,5-DSP and l OEt is recrystallized from benzene, yellow crystals, comprising 2,5-DSP and l OEt in a molar ratio of 1 2, deposit. In the DSC curve of this crystal, a single endothermic peak is observed at 166°C, which is different from the melting point of either 2,5-DSP (223°C) or l OEt (156°C). Furthermore, the X-ray powder diffraction pattern of the crystal is quite different from those of the homocrystals 2,5-DSP and l OEt. Upon irradiation the cocrystal 2,5-DSP-l OEt affords a crystalline polymer (77i h = 1.0 dl g in trifluoroacetic acid). The nmr spectrum of the polymer coincides perfectly with that of a 1 2 mixture of poly-2,5-DSP and poly-1 OEt. In the dimer, only 2,5-DSP-dimer and l OEt-dimer are detected by hplc analysis, but the corresponding cross-dimer consisting of 2,5-DSP and l OEt is not detected at all (Hasegawa et al., 1993). These observations by nmr and hplc indicate that the photoproduct obtained from the cocrystal 2,5-DSP-l OEt is not a copolymer but a mixture of poly-2,5-DSP and poly-l OEt in the ratio 1 2. 

The head-to-tail arrangement in poly-(vinyl alcohol) is further confirmed by its X-ray diffraction pattern in the crystalline state. Likewise, analysis of the X-ray diffraction of crystalline poly-(vinylidene chloride), (—CH2—CCI2—)x, and of crystalline (stretched) polyisobutylene, [—CH2—C(CH3)2—]x, shows the units to be arranged in these cases also in the expected head-to-tail forms. 

X-ray diffraction has been applied to certain AB cements. For example. Crisp et al. (1979), in a study of silicate mineral-poly(acrylic acid) cements, used the technique both to assess the purity of the powdered minerals employed and to monitor mineral decomposition in mixtures with poly(acrylic acid), in order to indicate whether or not cement formation had taken place. They employed Cu radiation passed through a nickel filter for most of the samples, a seven-hour exposure time was found to be adequate for the development of a discernible diffraction pattern. Samples were identified by reference to published powder diffraction data. 

Most DNA, natural and synthetic, can adopt the B-form as defined by its characteristic X-ray pattern [3]. There are few a species of synthetic DNA, namely poly(dA) poly(dT), poly(dI) poly(dC), poly(dA-dI) poly(dC-dT) and poly(dI-dC)-poly(dI-dC), which have a B-form that significantly differs from that of the other complementary deoxy polymers due to their different intramolecular packing arrangements and slightly changed value for the rise per residue. The helix parameters are presented in Table 1. The linear sequen-... 

---