Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Poly ether methacrylate

Polymer Blends. The miscibility of poly(ethylene oxide) with a number of other polymers has been studied, eg, with poly (methyl methacrylate) (18—23), poly(vinyl acetate) (24—27), polyvinylpyrroHdinone (28), nylon (29), poly(vinyl alcohol) (30), phenoxy resins (31), cellulose (32), cellulose ethers (33), poly(vinyl chloride) (34), poly(lactic acid) (35), poly(hydroxybutyrate) (36), poly(acryhc acid) (37), polypropylene (38), and polyethylene (39). [Pg.342]

Poly(hydroxyethyl methacrylate)-dye copolymers —The color additives formed by reaction of one or more of the foUowiag reactive dyes with poly(hydroxyethyl methacrylate), so that the sulfate group (or groups) or chlorine substituent of the dye is replaced by an ether linkage to poly(hydroxyethyl methacrylate) (see Dyes, reactive). The dyes that may be used alone or ia combination are... [Pg.453]

Comparison of Table 5.4 and 5.7 allows the prediction that aromatic oils will be plasticisers for natural rubber, that dibutyl phthalate will plasticise poly(methyl methacrylate), that tritolyl phosphate will plasticise nitrile rubbers, that dibenzyl ether will plasticise poly(vinylidene chloride) and that dimethyl phthalate will plasticise cellulose diacetate. These predictions are found to be correct. What is not predictable is that camphor should be an effective plasticiser for cellulose nitrate. It would seem that this crystalline material, which has to be dispersed into the polymer with the aid of liquids such as ethyl alcohol, is only compatible with the polymer because of some specific interaction between the carbonyl group present in the camphor with some group in the cellulose nitrate. [Pg.88]

Poly(ethylene terephtlhalate) Phenol-formaldehyde Polyimide Polyisobutylene Poly(methyl methacrylate), acrylic Poly-4-methylpentene-1 Polyoxymethylene polyformaldehyde, acetal Polypropylene Polyphenylene ether Polyphenylene oxide Poly(phenylene sulphide) Poly(phenylene sulphone) Polystyrene Polysulfone Polytetrafluoroethylene Polyurethane Poly(vinyl acetate) Poly(vinyl alcohol) Poly(vinyl butyral) Poly(vinyl chloride) Poly(vinylidene chloride) Poly(vinylidene fluoride) Poly(vinyl formal) Polyvinylcarbazole Styrene Acrylonitrile Styrene butadiene rubber Styrene-butadiene-styrene Urea-formaldehyde Unsaturated polyester... [Pg.434]

ABA type poly(hydroxyethyl methacrylate) (HEMA) and PDMS copolymers were synthesized by the coupling reactions of preformed a,co-isocyanate terminated PDMS oligomers and amine-terminated HEMA macromonomers312). Polymerization reactions were conducted in DMF solution at 0 °C. Products were purified by precipitation in diethyl ether to remove unreacted PDMS oligomers. After dissolving in DMF/toluene mixture, copolymers were reprecipitated in methanol/water mixture to remove unreacted HEMA oligomers. Microphase separated structures were observed under transmission electron microscope, using osmium tetroxide stained thin copolymer films. [Pg.45]

Solubilization of a graft copolymer comprising a hydrophobic poly(dodecyl-methacrylate) backbone and hydrophilic poly(ethylene glycol) monomethyl ether side chains in water/AOT/cyclohexane w/o microemulsions was rationalized in terms of the backbone dissolved in the continuous apolar phase and the side chains entrapped within the aqueous micellar cores [189],... [Pg.490]

The same type of addition—as shown by X-ray analysis—occurs in the cationic polymerization of alkenyl ethers R—CH=CH—OR and of 8-chlorovinyl ethers (395). However, NMR analysis showed the presence of some configurational disorder (396). The stereochemistry of acrylate polymerization, determined by the use of deuterated monomers, was found to be strongly dependent on the reaction environment and, in particular, on the solvation of the growing-chain-catalyst system at both the a and jS carbon atoms (390, 397-399). Non-solvated contact ion pairs such as those existing in the presence of lithium catalysts in toluene at low temperature, are responsible for the formation of threo isotactic sequences from cis monomers and, therefore, involve a trans addition in contrast, solvent separated ion pairs (fluorenyllithium in THF) give rise to a predominantly syndiotactic polymer. Finally, in mixed ether-hydrocarbon solvents where there are probably peripherally solvated ion pairs, a predominantly isotactic polymer with nonconstant stereochemistry in the jS position is obtained. It seems evident fiom this complexity of situations that the micro-tacticity of anionic poly(methyl methacrylate) cannot be interpreted by a simple Bernoulli distribution, as has already been discussed in Sect. III-A. [Pg.89]

Z)ra c/ - poly(butyl vinyl ether)-v-[2-(vinyloxy)ethyl methacrylate] )-v-(Z>ra c/ - poly(methyl methacrylate)-v-[2-(vinyloxy)ethyl methacrylate] )... [Pg.390]

Amorphous polymers are characterized by the following properties They are transparent and very often soluble in common organic solvents at room temperature. The following amorphous polymers have gained industrial importance as thermoplastic materials polyfvinyl chloride), polystyrene, polyfmethyl methacrylate), ABS-polymers, polycarbonate, cycloolefine copolymers, polysulfone, poly( ether sulfone), polyfether imide). [Pg.24]

PS (polystyrene), PVC [poly(vinyl chloride)], PC (bisphenol A polycarbonate) PMMA [poly (methyl methacrylate)], PB (polybutadiene), SAN (styrene-acrylonitrile copolymer),NBR (acrylonitrile-butadiene rubber), PPE (polyphenylene ether), SBR (styrene-butadiene rubber)... [Pg.366]

The high-pressure phase behavior of polymer-solvent-supercritical carbon dioxide systems was investigated experimentally The polymers used were poly(methyl methacrylate), polystyrene, polybutadiene, and poly(vinyl ethyl ether) at concentrations ranging from 5 to 10% in mixtures with toluene or tetrahydrofuran. The experiments were conducted for temperatures from 25 to 70°C and pressures up to 2200 psi in a high-pressure cell (Kiamos and Donohue, 1994). [Pg.153]

CD are very rigid molecules and polyrotaxanes derived from them are expected to be more rigid than the starting backbone. Poly(methyl methacrylate side chain rotaxane) 56 had a Tg 20°C higher than the backbone itself. The same observation was also seen in side chain poly(ether ketone) and poly(ether sulfone) systems [96-102]. [Pg.312]

MC MDI MEKP MF MMA MPEG MPF NBR NDI NR OPET OPP OSA PA PAEK PAI PAN PB PBAN PBI PBN PBS PBT PC PCD PCT PCTFE PE PEC PEG PEI PEK PEN PES PET PF PFA PI PIBI PMDI PMMA PMP PO PP PPA PPC PPO PPS PPSU Methyl cellulose Methylene diphenylene diisocyanate Methyl ethyl ketone peroxide Melamine formaldehyde Methyl methacrylate Polyethylene glycol monomethyl ether Melamine-phenol-formaldehyde Nitrile butyl rubber Naphthalene diisocyanate Natural rubber Oriented polyethylene terephthalate Oriented polypropylene Olefin-modified styrene-acrylonitrile Polyamide Poly(aryl ether-ketone) Poly(amide-imide) Polyacrylonitrile Polybutylene Poly(butadiene-acrylonitrile) Polybenzimidazole Polybutylene naphthalate Poly(butadiene-styrene) Poly(butylene terephthalate) Polycarbonate Polycarbodiimide Poly(cyclohexylene-dimethylene terephthalate) Polychlorotrifluoroethylene Polyethylene Chlorinated polyethylene Poly(ethylene glycol) Poly(ether-imide) Poly(ether-ketone) Polyethylene naphthalate Polyether sulfone Polyethylene terephthalate Phenol-formaldehyde copolymer Perfluoroalkoxy resin Polyimide Poly(isobutylene), Butyl rubber Polymeric methylene diphenylene diisocyanate Poly(methyl methacrylate) Poly(methylpentene) Polyolefins Polypropylene Polyphthalamide Chlorinated polypropylene Poly(phenylene oxide) Poly(phenylene sulfide) Poly(phenylene sulfone)... [Pg.959]

PP-b-PMMA (Mn = 22220, Mw/Mn = 1.14) was produced by CRP via another route. Terminally vinyl PP (Mn = 3100, Mw/Mn = 1.45, isotactic-ity = 32%) prepared using a zirconocene catalyst was converted to terminally brominated PP via PP-SiH prepared by hydrosilylation [70]. The resulting PP-b-PMMA was purified by extraction of unreacted PP with diethyl ether. Poly(ethylene-co-butene)-bZocfc-poly(methyl methacrylate) (EBR-b-PMMA) was synthesized through the bromination of terminally hydroxy-lated EBR (Mw = 3600 g/mol, Mw/Mn = 1.05), which was commercially available [71]. An atactic PP/PMMA had been synthesized by a combination of metallocene catalyses, Cp2ZrCl2 and Me2Si(CpMe4)(.W-f-Bu)TiCl2, and ATRP [72]. [Pg.96]

Aldol group transfer polymerization of ferf-butyldimethylsilyl vinyl ether [62] was initiated by pendant aldehyde functions incorporated along a poly(methyl methacrylate) (PMMA) backbone [63]. This backbone was a random copolymer prepared by group transfer polymerization of methyl methacrylate (MMA) and acetal protected 5-methacryloxy valeraldehyde. After deprotection of the aldehyde initiating group, polymerization proceeded by activation with zinc halide in THF at room temperature. The reaction led to a graft copolymer with PMMA backbone and poly(silyl vinyl ether) or, upon hydrolysis of the ferf-butyldimethylsilyl groups, poly(vinyl alcohol) branches. [Pg.43]

Pentadienyl-terminated poly(methyl methacrylate) (PMMA) as well as PSt, 12, have been prepared by radical polymerization via addition-fragmentation chain transfer mechanism, and radically copolymerized with St and MMA, respectively, to give PSt-g-PMMA and PMMA-g-PSt [17, 18]. Metal-free anionic polymerization of tert-butyl acrylate (TBA) initiated with a carbanion from diethyl 2-vinyloxyethylmalonate produced vinyl ether-functionalized PTBA macromonomer, 13 [19]. [Pg.139]

Whereas UL 94 delivers only a classification based on a pass-and-fail system, LOI can be used to rank and compare the flammability behavior of different materials. In Figure 15.2 the increasing LOI values are presented for different polymers as an example POM = poly(oxymethylene), PEO = poly(ethyl oxide), PMMA = poly(methyl methacrylate), PE = polyethylene), PP, ABS, PS, PET = polyethylene terephthalate), PVA = poly(vinyl alcohol), PBT, PA = poly(amide), PC, PPO = poly(phenylene oxide), PSU, PEEK = poly(ether ether ketone), PAEK = poly(aryl ether ketone), PES, PBI = poly(benzimidazole), PEI = poly(ether imide), PVC = poly(vinyl chloride), PBO = poly(aryl ether benzoxazole), PTFE. The higher the LOI, the better is the intrinsic flame retardancy. Apart from rigid PVC, nearly all commodity and technical polymers are flammable. Only a few high-performance polymers are self-extinguishing. Table 15.1 shows an example of how the LOI is used in the development of flame-retarded materials. The flame retardant red phosphorus (Pred) increases... [Pg.391]

Cellulose acetate Cellulose acetate butyrate Polyamide 6 Polyamide 6.6 Polyamides 11, 12 Polycarbonate Poly(ether ether ketone) Polyethylene low density high density Polyethylene terephthalate) Poly(methyl methacrylate) Polyoxymethylene Poly(phenylene oxide)... [Pg.144]


See other pages where Poly ether methacrylate is mentioned: [Pg.739]    [Pg.200]    [Pg.175]    [Pg.310]    [Pg.504]    [Pg.17]    [Pg.77]    [Pg.664]    [Pg.154]    [Pg.258]    [Pg.390]    [Pg.390]    [Pg.390]    [Pg.390]    [Pg.22]    [Pg.60]    [Pg.293]    [Pg.301]    [Pg.313]    [Pg.314]    [Pg.16]    [Pg.18]    [Pg.192]    [Pg.80]   


SEARCH



Methacrylate ether

Poly - methacrylic

Poly ethers

Poly methacrylate

Poly methacrylics

© 2024 chempedia.info