Poly electrical properties

Table 3. Electrical Properties of Poly(vinylidene fluoride)...

Electrical Properties. Poly(methyl methacrylate) has specific electrical properties that make it unique (Table 4). The surface resistivity of poly(methyl methacrylate) is higher than that of most plastic materials. Weathering and moisture affect poly(methyl methacrylate) only to a minor degree. High resistance and nontracking characteristics have resulted in its use in high voltage appHcations, and its excellent weather resistance has promoted the use of poly(methyl methacrylates) for outdoor electrical appHcations (22). 

Table 4. Electrical Properties of 6.35-mm Thick Poly(methyl methacrylate) Sheet ...

Electrical Properties. AH polyolefins have low dielectric constants and can be used as insulators in particular, PMP has the lowest dielectric constant among all synthetic resins. As a result, PMP has excellent dielectric properties and alow dielectric loss factor, surpassing those of other polyolefin resins and polytetrafluoroethylene (Teflon). These properties remain nearly constant over a wide temperature range. The dielectric characteristics of poly(vinylcyclohexane) are especially attractive its dielectric loss remains constant between —180 and 160°C, which makes it a prospective high frequency dielectric material of high thermal stabiUty. 

Commonly used materials for cable insulation are poly(vinyl chloride) (PVC) compounds, polyamides, polyethylenes, polypropylenes, polyurethanes, and fluoropolymers. PVC compounds possess high dielectric and mechanical strength, flexibiUty, and resistance to flame, water, and abrasion. Polyethylene and polypropylene are used for high speed appHcations that require a low dielectric constant and low loss tangent. At low temperatures, these materials are stiff but bendable without breaking. They are also resistant to moisture, chemical attack, heat, and abrasion. Table 14 gives the mechanical and electrical properties of materials used for cable insulation. 

Automotive appHcations account for about 116,000 t of woddwide consumption aimuaHy, with appHcations for various components including headlamp assembHes, interior instmment panels, bumpers, etc. Many automotive appHcations use blends of polycarbonate with acrylonitrile—butadiene—styrene (ABS) or with poly(butylene terephthalate) (PBT) (see Acrylonitrile polymers). Both large and smaH appHances also account for large markets for polycarbonate. Consumption is about 54,000 t aimuaHy. Polycarbonate is attractive to use in light appHances, including houseware items and power tools, because of its heat resistance and good electrical properties, combined with superior impact resistance. 

Figure 6.5. Electrical properties of poly(vinyl acetate) (Gelva 60) at 60, 120, 240, 500, 1000, 2000, 3000, 6000 and 10000Hz. (Copyright 1941 by the American Chemical Society and reprinted by permission of the copyright holder)...

Siloxane containing interpenetrating networks (IPN) have also been synthesized and some properties were reported 59,354 356>. However, they have not received much attention. Preparation and characterization of IPNs based on PDMS-polystyrene 354), PDMS-poly(methyl methacrylate) 354), polysiloxane-epoxy systems 355) and PDMS-polyurethane 356) were described. These materials all displayed two-phase morphologies, but only minor improvements were obtained over the physical and mechanical properties of the parent materials. This may be due to the difficulties encountered in controlling the structure and morphology of these IPN systems. Siloxane modified polyamide, polyester, polyolefin and various polyurethane based IPN materials are commercially available 59). Incorporation of siloxanes into these systems was reported to increase the hydrolytic stability, surface release, electrical properties of the base polymers and also to reduce the surface wear and friction due to the lubricating action of PDMS chains 59). 

As part of an effort to develop high-performance, high-temperature-resistant polymers for microelectronics applications, we also recently described a series of both partially fluorinated and nonfluorinated poly(aryl ether ketone)s containing amide, amide-imide, cyano oxadizole, or pyridazine groups and characterized their thermal and electrical properties.11... 

Poly(tetrafluoroethylene) (PTFE), which is also known by DuPont s trade-name Teflon, is a solid at room temperature and has a dielectric constant in the range of 2.00-2.08, while its monomer, tetrafluoroethylene, is a gas at room temperature. PTFE is exceptionally chemically inert, has excellent electrical properties and outstanding stability, and retains its mechanical properties at high temperatures. The problem with PTFE is that it is not processable. A family of commercial polymeric materials known as Teflon AF is believed to be a... 

Structural effects on properties were also studied in detail by a group from Tohoku University, who prepared poly(methylphenylsilylene) (PMPS Mv = 3,120, Mw/Mn = 1.76) and poly(phenylsilyne) (131 poly(penfafluorophenylrilyne)(PPS) 4/w = 1,090, Mw/M = 1.30) by Wurtz-type coupling using sodium and 18-crown-6 in hot toluene and compared their optical and electrical properties.359,360... 

Sandrolini, F., Motori, A. and Saccani, A., Electrical properties of poly(Buty-lene Terephthalate),./. Appl. Polym. Sci., 44, 765-771 (1992). 

Poly(butylene terephthalate) (PBT) is a semicrystalline, thermoplastic polyester which is completely analogous to PET except that it has a longer, more flexible butylene chain linkage which imparts a rapid crystallization rate, thus making PBT well suited to injection moulding processes. This polyester is used widely for electrical and electronic components due to its high temperature resistance and good electrical properties (Chapter 8). 

Modification of Electrical Properties in Poly-iV-Vinylcarbazole by UV Light—Thermally Stimulated Current... 

Sulfur nitride polymers [-(-S = N-)-], which have optical and electrical properties similar to those of metals, were first synthesized in 1910. These crystalline polymers, which are super-conducive at 0.25 K, may be produced at room temperature using the solid state polymerization of the dimer (S2N2). A dark blue-black amorphous paramagnetic form of poly(sulfur nitride) (structure 11.30) is produced by quenching the gaseous tetramer in liquid nitrogen. The polymer is produced on heating the tetramer to about 300°C. 

Multiple Heck reactions have also been applied in a number of ways to prepare polymers (Scheme 40). One-dimensionally 7r-conjugated polymers are attractive materials because of their optical and electrical properties resulting from 7r-electron delocalization along their main chains. Among these, poly(p-phenylenevinylene) (PPV) shows high electrical conductivity, large non-linear optical responses, and electroluminescent activity. One approach... 

---