Electrical properties of poly

Table 3. Electrical Properties of Poly(vinylidene fluoride)...

Figure 6.5. Electrical properties of poly(vinyl acetate) (Gelva 60) at 60, 120, 240, 500, 1000, 2000, 3000, 6000 and 10000Hz. (Copyright 1941 by the American Chemical Society and reprinted by permission of the copyright holder)...

Sandrolini, F., Motori, A. and Saccani, A., Electrical properties of poly(Buty-lene Terephthalate),./. Appl. Polym. Sci., 44, 765-771 (1992). [Pg.318]

Taniguchi, A., S. Kanda, X. Nogaito, S Kusabayashi, H. Mikawa, and I. Ito The electrical properties of poly(N-vinyl carbazole)/TCNQ polymers. Bull. Chem. Soc., Japan 37, 1386 (1964). [Pg.351]

Epstein, A., and B. Wildi Electrical properties of poly(copper phthlalocy-nine). J. Chem. Phys. 32, 324 (1960). [Pg.351]

Nishihara, H. Harada, H. Kaneko, S. Tateishi, M. Aramaki, K. Murray, R.W. Electrochemical and electrical properties of poly(hexachlorobuta-l,3-diene), an electrochemically graphitized film. J. Chem. Soc. Faraday Trans. 1991, 87, 319-324. [Pg.73]

S. Brahim and A. Guiseppi-Elie, Electroconductive hydrogels Electrical properties of poly-pyrrole-poly(HEMA) and electrochemical composites. Electroanalysis, 17(7), 556-570... [Pg.733]

J. Guastavino, D. Mary, E. Kranse, C. Laurent, and C. Mayoux. On the electrical properties of poly(ethylene naphthalate 2,6-dicarboxylate) biaxial-ly-oriented films. Polyrn. Int, 46(l) 72-76, May 1998. [Pg.388]

STRUCTURAL INVESTIGATION AND ELECTRICAL PROPERTIES OF POLY(P-PHENYLENE) PREPARED IN TWO DIFFERENT WAYS... [Pg.381]

Gokgeoren AT, Erbil C. Morphological characterization and electrochemical/electrical properties of poly(A-vinyl carbazole)/montmorillo-... [Pg.42]

I. T. Kim, R. L. Elsenbaumer, Synthesis, characterization, and electrical properties of poly(l-alkyl-2,5-pyrrylene vinylenes) New low band gap conducting polymers, Macromolecules 2000, 33, 6407... [Pg.69]

Chen ZH, Christensen L, Dahn JR (2004) Mechanical and electrical properties of poly (vinylidene fluoride-tetrafiuoroethylene-propylene)/super-S carbon black swelled in liquid solvent as an electrode binder for lithium-ion batteries. J Appl Polym Sci 91 2958-2965... [Pg.502]

M. Miyasaka, T. Yamazaki, E. Tsuchida and H. Nishide. Magnetic and electrical properties of poly(3-radical-substituted thiophene)s. Polyhedron 20(11-14), 1157-1162 (2001). [Pg.216]

Kawai T, Kojima S, Tanaka F, Yoshino K (1998) Electrical property of poly(3-octyloxythiophene) and its gas sensor application. Jpn J Appl Phys Pt 1 37 6237-6241... [Pg.355]

Kalavtjidou et al. [74] measured the mechanical and electrical properties of poly-propylene-based nanocomposites reinforced with up to 25 vol% exfoliated graphite nanoplatelets. The mechanical and electrical properties of the graphite nanocomposites were investigated and compared to the properties of polypropylene-based composites reinforced with other conductive materials, for example, carbon black and carbon fibers. It was found that the graphite nanoplatelets were the most effective at increasing the modulus of the polypropylene and comparable to the other materials in terms of percolation threshold. [Pg.140]

McKean, D.R., Stille, J.K., Electrical Properties of Poly(5,6-dihydroxy-... [Pg.189]

Almost parallel to the polymerization of thiophene, much work has also been done with the electropolymerization of 3-methylthiophene. The structure, morphology, electronic, and electrical properties of poly(3-methylthiophene) have been studied by several authors [20,68]. [Pg.761]

As a result, two composite systems derived from partially aliphatic polyimides— 5-(2,5-dioxotetra-hydrofurfuryl)-3-methyl-3-cyclohexene-l,2-dicarboxylic acid anhydride reacting with 4,4 -oxydianiline (DOCDA-ODA) and with iron oxide as Fe304—were prepared at different temperatures, 250 and 300°C (Nica et al. 2015). Correlations among the structural, morphological, thermal, and magnetic properties were established for possible application as humidity sensor devices. In addition, the influence of humidity on the electrical properties of poly(DOCDA-ODA)/iron oxide composite were discussed, which led to an analysis of the humidity sensitivity of pure polyimide and of a poly(DOCDA-ODA)/Fe304 with different filler contents of iron oxides at various values of relative humidity (RH). [Pg.291]

UV irradiation causes changes in the electrical properties of poly(ethylene terephthalate) [1040]. Irradiation results in decreases in the relative dielectric constant and dielectric strength, whilst the dielectric loss factor is increased. [Pg.293]

Based on these experimental considerations, the authors succeeded in making accurate measurements of the electrical conductivity of gels. Here the electrical conductivity and other electrical properties of poly(2-acrylamide-2-methylpropane sulfonic acid) (PAMPS) will be introduced. [Pg.743]

H.-K. Shim, S.-K. Kim, J.-I. Jin, K.-H. Kim, and Y.-W. Park, Electrical properties of poly(l,4-phenylene vinylene-co-2,5-dimethoxy-l,4-phenylene vinylene)s and poly(l,4-phenylene vinylene-ro-2,5-thienylene vinylene)s. Bull. Korean Chem. Soc. 11 11 (1990). [Pg.359]

Gruber H, Patzsch J, Schrodner M, Roth HK, Eanghaenel E (1991) Electrical properties of poly(tetrathiafulvalenes). Synth Met 42 2331-2334... [Pg.184]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...