Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Photographic film wavelength

Soft x-rays with wavelengths of 1—10 nm ate used for scanning x-ray microscopy. A zone plate is used to focus the x-ray beam to a diameter of a few tens of nanometers. This parameter fixes and limits the resolution. Holographic x-ray microscopy also utilizes soft x-rays with photoresist as detector. With a strong source of x-rays, eg, synchrotron, resolution is in the 5—20-nm range. Shadow projection x-ray microscopy is a commercially estabflshed method. The sample, a thin film or thin section, is placed very close to a point source of x-rays. The "shadow" is projected onto a detector, usually photographic film. The spot size is usually about 1 ]lni in diameter, hence the resolution cannot be better than that. [Pg.332]

A conventional fluorescence microscope differs from a standard microscope by the light source (mercury or xenon lamp), which produces UV-visible light. The excitation wavelength is selected by an interference filter or a monochromator. Observation of the fluorescence is made by eye, photographic film or CCD (charge-... [Pg.353]

X-ray detectors also come in several varieties (1) single-photon counters which yield accurate results but require up to several weeks to acquire the 10,000 -100,000 (lO lO ) reflections necessary to compile a complete data set for a protein crystal (2) image plates that operate much like photographic film but are 10 times more sensitive (3) area detectors, electronic devices that detect X-ray photons on a two-dimensional surface. Both fluorescent-type detectors, image plates and fast area detectors, are more sensitive at the shorter wavelengths of X-ray radiation from synchrotron sources. [Pg.95]

Transparent Polymers. Amorphous thermoplastics, like poly (methyl methacrylate), polystyrene, SAN, PVC, or the cellulose esters are transparent and used for glazing, photographic film, blown bottles, or clear packaging containers. Only a few crystalline thermoplastics, like poly (4-methyl-l-pentane), where the crystalline and the amorphous phases have almost identical refractive indexes, or polycarbonate, which has smaller crystals than the wavelength of light, are also transparent. R. Kosfeld and co-workers analyzed the mobility of methyl groups in polycarbonate, poly (methyl methacrylate) and poly( -methyl styrene) by NMR spectroscopy. [Pg.14]


See other pages where Photographic film wavelength is mentioned: [Pg.417]    [Pg.334]    [Pg.160]    [Pg.194]    [Pg.284]    [Pg.50]    [Pg.50]    [Pg.332]    [Pg.130]    [Pg.130]    [Pg.248]    [Pg.125]    [Pg.367]    [Pg.83]    [Pg.306]    [Pg.130]    [Pg.168]    [Pg.57]    [Pg.254]    [Pg.136]    [Pg.365]    [Pg.334]    [Pg.199]    [Pg.242]    [Pg.96]    [Pg.649]    [Pg.194]    [Pg.699]    [Pg.31]    [Pg.291]    [Pg.120]    [Pg.369]    [Pg.635]    [Pg.665]    [Pg.473]    [Pg.51]    [Pg.2415]    [Pg.15]    [Pg.243]    [Pg.1335]    [Pg.365]    [Pg.166]    [Pg.337]    [Pg.2]    [Pg.11]    [Pg.69]    [Pg.125]   
See also in sourсe #XX -- [ Pg.191 , Pg.273 , Pg.306 ]




SEARCH



Photographic films

© 2024 chempedia.info