Phase transfer phosphonium salts

Halex rates can also be increased by phase-transfer catalysts (PTC) with widely varying stmctures quaternary ammonium salts (51—53) 18-crown-6-ether (54) pytidinium salts (55) quaternary phosphonium salts (56) and poly(ethylene glycol)s (57). Catalytic quantities of cesium duoride also enhance Halex reactions (58). 

Phosphonium salts are typically stable crystalline soHds that have high water solubiUty. Uses include biocides, flame retardants, the phase-transfer catalysts (98). Although their thermal stabiUty is quite high, tertiary phosphines can be obtained from pyrolysis of quaternary phosphonium haUdes. The hydroxides undergo thermal degradation to phosphine oxides as follows ... 

Phase-tiansfei catalysis (PTC) is a technique by which leactions between substances located in diffeient phases aie biought about oi accelerated. Typically, one OI more of the reactants are organic Hquids or soHds dissolved in a nonpolar organic solvent and the coreactants are salts or alkah metal hydroxides in aqueous solution. Without a catalyst such reactions are often slow or do not occur at ah the phase-transfer catalyst, however, makes such conversions fast and efficient. Catalysts used most extensively are quaternary ammonium or phosphonium salts, and crown ethers and cryptates. Although isolated examples of PTC can be found in the early Hterature, it is only since the middle of the 1960s that the method has developed extensively. 

The chloromethyl derivatives of 1 and 2 can be converted to the corresponding phosphonium salts by treatment with triphenyl-phosphine.19 A subsequent phase transfer catalysed Wittig reaction of these salts with formaldehyde introduced pendant vinyl groups. 

Benzylic quaternary phosphonium and ammonium salts are dealky-lated by mild heating and/or nucleophilic anions, particularly iodide (9) and thiolate (10), but also hydroxide (11). Most N-benzyl-pyridinium or quaternary aryl ammonium compounds are particularly susceptible (12). Decompositions of this sort have seriously limited the usefulness of solid phase-transfer catalysts derived from (chloromethyl)polystyrene (13, 14). 

The phosphonium salt 21 having a multiple hydrogen-bonding site which would interact with the substrate anion was applied to the phase transfer catalyzed asymmetric benzylation of the p-keto ester 20,[18 191 giving the benzylated P-keto ester 22 in 44% yield with 50% ee, shown in Scheme 7 Although the chemical yield and enantiomeric excess remain to be improved, the method will suggest a new approach to the design of chiral non-racemic phase transfer catalysts. 

C. M. Starks, Phase-Transfer Catalysis. L Heterogeneous Reactions Involving Anion Transfer by Quaternary Ammonium and Phosphonium Salts , J. Am. Chem. Soc 1971, 93,195-199. 

K. Manabe, Asymmetric Phase-Transfer Alkylation Catalyzed by a Chiral Quaternary Phosphonium Salt with a Multiple Hydrogen-Bonding Site , Tetrahedron Lett. 1998, 39, 5807-5810. 

K. Manabe, Synthesis of Nobel Chiral Quaternary Phosphonium Salts with a Multiple Hydrogen-Bonding Site, and Their Application to Asymmetric Phase-Transfer Alkylation , Tetrahedron 1998, 54, 14465-14476. 

Onium salts, crown ethers, alkali metal salts or similar chelated salts, quaternary ammonium and phosphonium are some of the salts which have been widely used as phase transfer catalysts (PTC). The choice of phase transfer catalysts depends on a number of process factors, such as reaction system, solvent, temperature, removal and recovery of catalyst, base strength etc. 

Long-chain alkyl 14B>146 and polymer-bound147 phosphonium salts have been used as phase-transfer catalysts. 

It was a result of demand from industry in the mid-1960s for an alternative to be found for the expensive traditional synthetic procedures that led to the evolution of phase-transfer catalysis in which hydrophilic anions could be transferred into an organic medium. Several phase-transfer catalysts are available quaternary ammonium, phosphonium and arsonium salts, crown ethers, cryptands and polyethylene glycols. Of these, the quaternary ammonium salts are the most versatile and, compared with the crown ethers, which have many applications, they have the advantage of being relatively cheap, stable and non-toxic [1, 2]. Additionally, comparisons of the efficiencies of the various catalysts have shown that the ammonium salts are superior to the crown ethers and polyethylene glycols and comparable with the cryptands [e.g. 3, 4], which have fewer proven applications and require higher... 

Starks, C. M. J. Am. Chem. Soc. 93 (1971) 195 Phase transfer catalysis I. Heterogeneous reactions involving anion transfer by quaternary phosphonium salts. 

The general concept of phase transfer catalysis applies to the transfer of any species from one phase to another (not just anions as illustrated above), provided a suitable catalyst can be chosen, and provided suitable phase compositions and reaction conditions are used. Most published work using PTC deals only with the transfer of anionic reactants using either quaternary ammonium or phosphonium salts, or with crown ethers in liquid-liquid or liquid-solid systems. Examples of the transfer and reaction of other chemical species have been reported(24) but clearly some of the most innovative work in this area has been done by Alper and his co-workers, as described in Chapter 2. He illustrates that gas-liquid-liquid transfers with complex catalyst systems provide methods for catalytic hydrogenations with gaseous hydrogen. 

The first catalysts utilized in phase transfer processes were quaternary onium salts. In particular, benzyltriethylammonium chloride was favored by Makosza (7 ) whereas Starks utilized the more thermally stable phosphonium salts (6,8). In either case, the catalytic process worked in the same way the ammonium or phosphonium cation exchanged for the cation associated with the nucleophilic reagent salt. The new reagent, Q+Nu , dissolved in the organic phase and effected substitution. 

The preparation of novel phase transfer catalysts and their application in solving synthetic problems are well documented(l). Compounds such as quaternary ammonium and phosphonium salts, phosphoramides, crown ethers, cryptands, and open-chain polyethers promote a variety of anionic reactions. These include alkylations(2), carbene reactions (3), ylide reactions(4), epoxidations(S), polymerizations(6), reductions(7), oxidations(8), eliminations(9), and displacement reactions(10) to name only a few. The unique activity of a particular catalyst rests in its ability to transport the ion across a phase boundary. This boundary is normally one which separates two immiscible liquids in a biphasic liquid-liquid reaction system. 

Polymer phase-transfer catalysts (also referred to as triphase catalysts) are useful in bringing about reaction between a water-soluble reactant and a water-insoluble reactant [Akelah and Sherrington, 1983 Ford and Tomoi, 1984 Regen, 1979 Tomoi and Ford, 1988], Polymer phase transfer catalysts (usually insoluble) act as the meeting place for two immiscible reactants. For example, the reaction between sodium cyanide (aqueous phase) and 1-bromooctane (organic phase) proceeds at an accelerated rate in the presence of polymeric quaternary ammonium salts such as XXXIX [Regen, 1975, 1976]. Besides the ammonium salts, polymeric phosphonium salts, crown ethers and cryptates, polyethylene oxide), and quaternized polyethylenimine have been studied as phase-transfer catalysts [Hirao et al., 1978 Ishiwatari et al., 1980 Molinari et al., 1977 Tundo, 1978]. 

A slow non-competing liquid/liquid reaction with no catalyst present gave only 78 % O-alkylation. Thus the active site of the lipophilic phosphonium ion catalysts appears to be aprotic, just as in analogous phase transfer catalyzed alkylations with soluble quaternary ammonium salts 60), Regen 78) argued that the onium ion sites of both the 17% and the 52% RS tri-n-butylphosphonium ion catalysts 1 are hydrated, on the basis of measurements of water contents of the resins in chloride form. Mon-tanari has reported measurements that showed only 3.0-3.8 mols of water per chloride ion in similar 25 % RS catalysts 74). He argued that such small hydration levels do not constitute an aqueous environment for the displacement reactions. No measurements of the water content of catalysts containing phenoxide or 2-naphthoxide ions have been reported. 

The dependence of kobsd on stirring speed for Br-I exchange reactions with polymer-supported crown ethers 34 and 35 has been determined under the same conditions as with polymer-supported phosphonium salts 1 and 4149). Reaction conditions were 90 °C, 0.02 molar equiv of 100-200 mesh catalyst, 16-17% RS, 2% CL, 20 mmol of 1-bromooctane, 200 mmol of KI, 20 ml of toluene, and 30 ml of water. Reaction rates with 34 and 35 increased with increased stirring speed up to 400 rpm, and were constant above that value. This result resembles that with polymer-supported onium ion catalysts and indicates that mass transfer as a limiting factor can be removed in experiments carried out at stirring speeds of 500-600 rpm, whatever kind of polymer-supported phase transfer catalyst is used. 

Complexation constants of crown ethers and cryptands for alkali metal salts depend on the cavity sizes of the macrocycles 152,153). ln phase transfer nucleophilic reactions catalyzed by polymer-supported crown ethers and cryptands, rates may vary with the alkali cation. When a catalyst 41 with an 18-membered ring was used for Br-I exchange reactions, rates decreased with a change in salt from KI to Nal, whereas catalyst 40 bearing a 15-membered ring gave the opposite effect (Table 10)l49). A similar rate difference was observed for cyanide displacement reactions with polymer-supported cryptands in which the size of the cavity was varied 141). Polymer-supported phosphonium salt 4, as expected, gave no cation dependence of rates (Table 10). 

---