Particle properties shape

Resin Viscosity. The flow properties of uncured compounded plastics is affected by the particle loading, shape, and degree of dispersion. Flow decreases with increased sphericity and degree of dispersion, but increases with increased loading. Fillers with active surfaces can provide thixotropy to filled materials by forming internal network stmctures which hold the polymers at low stress. 

Iron Oxide Reds. From a chemical point of view, red iron oxides are based on the stmcture of hematite, a-Fe202, and can be prepared in various shades, from orange through pure red to violet. Different shades are controlled primarily by the oxide s particle si2e, shape, and surface properties. Production. Four methods are commercially used in the preparation of iron oxide reds two-stage calcination of FeS047H2 O precipitation from an aqueous solution thermal dehydration of yellow goethite, a-FeO(OH) and oxidation of synthetic black oxide, Fe O. ... 

The large majority of activated alumina products are derived from activation of aluminum hydroxide, rehydrated alumina, or pseudoboehmite gel. Other commerical methods to produce specialty activated aluminas are roasting of aluminum chloride [7446-70-0], AIQ calcination of precursors such as ammonium alum [7784-25-0], AlH2NOgS2. Processing is tailored to optimize one or more of the product properties such as surface area, purity, pore size distribution, particle size, shape, or strength. 

In sohd—sohd separation, the soHds are separated iato fractions according to size, density, shape, or other particle property (see Size reduction). Sedimentation is also used for size separation, ie, classification of soHds (see Separation, size separation). One of the simplest ways to remove the coarse or dense soHds from a feed suspension is by sedimentation. Successive decantation ia a batch system produces closely controUed size fractions of the product. Generally, however, particle classification by sedimentation does not give sharp separation (see Size MEASUREMENT OF PARTICLES). 

The degree of bed expansion contributes to the efficiency of fluidised bed/expanded bed adsorption as a composite function of liquid distribution, liquid and particle properties (size, shape and density) and process conditions. Besides being an important design feature, the degree of bed expansion may be used as a quick and simple measure of bed stability.48... 

It is found that the major factor which determines the behaviour of the solid particles is their terminal falling velocity in the liquid. This property gives a convenient way of taking account of particle size, shape and density. 

Equation (1) points to a number of important particle properties. Clearly the particle diameter, by any definition, plays a role in the behavior of the particle. Two other particle properties, density and shape, are of significance. The shape becomes important if particles deviate significantly from sphericity. The majority of pharmaceutical aerosol particles exhibit a high level of rotational symmetry and consequently do not deviate substantially from spherical behavior. The notable exception is that of elongated particles, fibers, or needles, which exhibit shape factors, kp, substantially greater than 1. Density will frequently deviate from unity and must be considered in comparing aerodynamic and equivalent volume diameters. 

Particle properties (density, size, porosity, shape, wettability, size distribution) Biofilm properties (density, thickness, active fraction)... 

The use of the electron density and the number of electrons as a set of independent variables, in contrast to the canonical set, namely, the external potential and the number of electrons, is based on a series of papers by Nalewajski [21,22]. A.C. realized that this choice is problematic because one cannot change the number of electrons while the electron density remains constant. After several attempts, he found that the energy per particle possesses the convexity properties that are required by the Legendre transformations. When the Legendre transform was performed on the energy per particle, the shape function immediately appeared as the conjugate variable to the external potential, so that the electron density was split into two pieces that can be varied independent the number of electrons and their distribution in space. 

The respirable powders of a DPI cannot be characterized adequately by single-particle studies alone bulk properties must also be assessed since they contribute to ease of manufacture and affect system performance. Primary bulk properties include particle size, particle size distribution, bulk density, and surface area. These properties, along with particle electrostatics, shape, surface morphology, etc., affect secondary bulk-powder characteristics such as powder fiow, handling, consolidation, and dispersibility. 

Theory. The velocity (v) of particle sedimentation during centrifugation depends on the angular velocity co of the rotor, its effective radius (teff, the distance from the axis of rotation), and the particle s sedimentation properties. These properties are expressed as the sedimentation coef cient S (1 Svedberg, = 10 s). The sedimentation coef cient depends on the mass M of the particle, its shape (expressed as the coef cient of friction, f), and its density (expressed as the reciprocal density v, partial specific volume ). 

Chem. Geol. 157 275-284 Meisel.W. (1989) Corrosion processes and their inhibition as studied by Mdssbauer conversion and other electron spectroscopies. Hy-perfine Interactions 45 73-90 Meisen, U. Kathrein, H. (2000) The influence of particle size, shape and particle size distribution on properties of magnetites for the production of toners. J. Imag. Sci. Techn. 44 508-513... 

Indices are dimensionless parameters derived from various mechanical and physical properties of the tablet blend and resulting compacts. Mechanical properties typically measured include indentation hardness (kinetic and static), elastic modulus, and tensile strength (10,11). Physical properties include particle size, shape, and size distribution, density (true, bulk, and tapped), flow properties and cohesive properties. 

In this section, various issues concerning solid particles are presented. The analysis covers the most important particle properties (surface area, particle shape and size distribution, mechanical strength, and density) as well as the behavior of a single particle in suspension (terminal velocity) and of a number of particles in fluidization state. Finally, the diffusion of molecules in a porous particle (diffusion coefficients) is also discussed. 

Statistical mechanics was originally formulated to describe the properties of systems of identical particles such as atoms or small molecules. However, many materials of industrial and commercial importance do not fit neatly into this framework. For example, the particles in a colloidal suspension are never strictly identical to one another, but have a range of radii (and possibly surface charges, shapes, etc.). This dependence of the particle properties on one or more continuous parameters is known as polydispersity. One can regard a polydisperse fluid as a mixture of an infinite number of distinct particle species. If we label each species according to the value of its polydisperse attribute, a, the state of a polydisperse system entails specification of a density distribution p(a), rather than a finite number of density variables. It is usual to identify two distinct types of polydispersity variable and fixed. Variable polydispersity pertains to systems such as ionic micelles or oil-water emulsions, where the degree of polydispersity (as measured by the form of p(a)) can change under the influence of external factors. A more common situation is fixed polydispersity, appropriate for the description of systems such as colloidal dispersions, liquid crystals, and polymers. Here the form of p(cr) is determined by the synthesis of the fluid. 

---