Palladium Hydrazine

The three orthogonally removable lysine protecting groups we use here are Fmoc (9-fluorenyl methoxy carbonyl), cleavable with 20% base, preferably with 20% piperidine or 3% DBU (l,8-diazabicyclo[5.4.0]undec-7-ene) (18), Dde (1-(4,4-dimethyl-2,6-dioxocyclohexylidene)-ethyl), cleavable with 2% hydrazine, and Aloe (allyloxy carbonyl), cleavable with palladium. Hydrazine also removes Fmoc, and thus it can be applied only if no Fmoc groups are present on the growing peptide chain. Acid-sensitive amino protecting groups available are Boc (tert-butyloxy carbonyl), cleavable with 90% TFA, and Mtt (4-methyl-trityl), cleavable with 1% TFA. We use Boc for the protection of the N-terminal moieties of N-terminal amino acids in each peptide chain as well as at the N-terminus of the scaffold. 

The redox property of hydrazine stabilizes the lowest oxidation state of the metal in all its metal hydrazine complexes. It is not possible to prepare platinum or palladium hydrazines as they are reduced to metals [24]. 

A cousin to this reduction is one using stannous chloride (a.k.a. SnCb, a.k.a. Tin chloride) which is done exactly as the calcium one except that about lOOg of SnCb is used in place of the Mg or Ca and the addition occurs at room temperature and the solution is stirred for one hour rather than 15 minutes. Some very good reductions that operate almost exclusively at room temperature with no pressure and give almost 100% yields are to follow. The only reason Strike did not detail these methods is that some of the chemicals involved are a little less common than Strike is used to but all are available to the public. These alternatives include acetlylacetone and triethylamine [73], propanedithlol and trieth-ylamine [74], triphenylphosphine [75], NaBH4 with phase transfer catalyst [76], H2S and pyridine [77], and palladium hydrox-ide/carbon with hydrazine [78], stannous chloride dihydrate [85]. 

Reactive halogens in various series have been removed by catalytic hydrogenation with either platinum or palladium catalysts, and other nucleophiles which have been used in chloride displacements include hydroxide ion, alkoxides, hydrosulflde, hydrazine and toluene-p-sulfonylhydrazine, and trimethyl phosphite. 

Palladium catalysts have been prepared by fusion of palladium chloride in sodium nitrate to give palladium oxide by reduction of palladium salts by alkaline formaldehyde or sodium formate, by hydrazine and by the reduction of palladium salts with hydrogen.The metal has been prepared in the form of palladium black, and in colloidal form in water containing a protective material, as well as upon supports. The supports commonly used are asbestos, barium carbonate, ... 

The colloidal palladium solution is prepared as follows A solution of a palladium salt is added to a solution of an alkali salt of an acid of high molecular weight, the sodium salt of protalbinic acid being suitable. An excess of alkali dissolves the precipitate formed, and the solution contains tine palladium in the form of a hydrosol of its hydroxide. The solution is purified by dialysis, and the hydroxide reduced with hydrazine hydrate. On further dialysis and evaporation to dryness a water-soluble product is obtained, consisting of colloidal palladium and sodium protalbinate, the latter acting as a protective colloid. 

Two hydrogen-transfer systems have been developed that also give good yields of hydroxylamines. One uses 5% palladium-on-carbon in aqueous tetrahydrofuran with phosphinic acid or its sodium salt as hydrogen donor the other uses 5% rhodium-on-carbon in aqueous tetrahydrofuran and hydrazine as donor. These systems are complementary and which is the better may depend on the substrate (36). The reductions cannot be followed by pressure drop, and both require analysis of the product to determine when the reduction should be terminated. 

N-Nilrosoamines are reduced easily lo ihe hydrazine and, if continued, lo the amine (62). Early workers ruled out cleavage of dimeihylhydrazine as the source of dimethylamine in hydrogenation of N-nitrosodimethylamine since liule ammonia was found the letramethylietrazene was implicated in the hydrogenolysis (fSI). Palladium-on-carbon under mild conditions is used for industrial production of dialkyl hydrazines from N-nitrosoamines. 

Acetone is the best solvent for NBR hydrogenation in the presence of palladium carboxylates. No hydrogenation is achieved when chloroform or chlorobenzene are the solvents. Since it is understood that palladium is reduced to colloidal metal in the presence of hydrogen, attempts have also been made to reduce the palladium by hydrazine [76], methylaluminoxane [84], and trialky] aluminum [85] to improve the catalytic activity. 

Dibenzo[6,/][l,4,5]thiadiazepine is converted into the 5,6-dihydro derivative on treatment with hydrazine in the presence of 5% palladium on charcoal.153... 

Diphenylbutadiene (16, 28) In yields of 50 per cent by reduction of 0-bro-mostyrene with hydrazine hydrate in the presence of a palladium catalyst and alco-... 

Using Hydrazine or Ammonium Formate with Palladium Catalysts... 

Creosol (also called 2-methoxy-jb-cresol, 4-methylguaiacol, and 3-methoxy-4-hydroxytoluene) has been obtained by the fractionation of beach creosote tar,4 by the reduction of vanillin by electrolytic methods,6 6 by hydrogen and palladium on charcoal or barium sulfate,7 8 with hydrazine,9 and by amalgamated zinc and hydrochloric acid.3 10 11 It has also been prepared by methyl-ation of 4-methylcatechol with methyl iodide 12 13 or with methyl sulfate 14 and is reported to be formed by the distillation of the calcium salt of 3-methoxy-4-hydroxyphenylacetic acid.16... 

The methoxymethyl ether protecting groups of 33 were then cleaved using triphenylphosphine and carbon tetrabromide. The resulting hydroquinone function was oxidized by palladium on carbon under an atmosphere of air to afford the quinone 52 (70 %). A two-step procedure was implemented to install the diazo function. First, the ketone function of 52 was condensed with N,N -bis( tert-butyldimethylsilyl)hydrazine in the presence of scandium triflate, which formed the Af-tert-butyldimethylsilyl hydrazone 53. The hydrazone (53) was then oxidized using difluoroiodobenzene to afford kinamycin C (3) in 35 % yield. 

The use of hydrazine hydrate in anhydrous methanol with 5% palladium on charcoal under an inert atmosphere gave excellent results for the reduction of l-benzyl-4-nitroimidazole (72 R1 = CH2Ph, R2 = H) with compound (71 R1 = CH2Ph, R2 = H) being isolated as its hydrochloride salt (96%) (74JMC1168). 

Palladium-catalyzed cyclization reactions with aryl halides have been used to synthesize pyrazole derivatives. V-Aryl-lV-(c>-bromobenzyl)hydrazines 26 participated in a palladium-catalyzed intramolecular amination reaction to give 2-aryl-2W-indazoles 27 . Palladium-catalyzed cascade intermolecular queuing-cyclocondensation reaction of o-iodophenol (28) with dimethylallene and aryl hydrazines provided pyrazolyl chromanones 29 <00TL7129>. A novel one-pot synthesis of 3,5-disubstituted-2-pyrazolines 32 has been achieved with an unexpected coupling-isomerization sequence of haloarene 30, propargyl alcohol 31, and methylhydrazine <00ACIE1253>. 

Pyrazoles were synthesized in the authors laboratory by Le Blanc et al. from the epoxy-ketone as already stated in Sect. 3.1.1a, Scheme 35 [80]. The synthetic strategy employed by Le Blanc et al. [80] was based upon that the strategy published by Bhat et al. [81] who also described the synthesis of pyrazoles but did not report cytotoxic evaluation on the synthesized compounds. Scheme 48 shows the synthesis of the most active compound (178). Dissolution of the epoxide (179) with a xylenes followed by treatment with p-toluenesulfonic acid and hydrazine hydrate produced the pure nitro-pyrazole 180 in good yield (60%). Catalytic hydrogenation with palladium on activated carbon allowed the amino-pyrazole (178) to be obtained in a pure form. This synthesis allowed relatively large numbers of compounds to be produced as the crude product was sufficiently pure. Yield, reaction time, and purification compared to reported approaches were improved [50, 61, and 81]. Cytotoxicity of these pyrazole analogs was disappointing. The planarity of these compounds may account for this, as CA-4, 7 is a twisted molecule. 

Liu et al. prepared palladium nanoparticles in water-dispersible poly(acrylic acid) (PAA)-lined channels of diblock copolymer microspheres [47]. The diblock microspheres (mean diameter 0.5 pm) were prepared using an oil-in-water emulsion process. The diblock used was poly(t-butylacrylate)-Wock-poly(2-cinna-moyloxyethyl) methacrylate (PtBA-b-PCEMA). Synthesis of the nanoparticles inside the PAA-lined channels of the microspheres was achieved using hydrazine for the reduction of PdCl2, and the nanoparticle formation was confirmed from TEM analysis and electron diffraction study (Fig. 9.1). The Pd-loaded microspheres catalyzed the hydrogenation of methylacrylate to methyl-propionate. The catalytic reactions were carried out in methanol as solvent under dihydro-... 

Finally, fully reduced heterocycles have been prepared either from a sequential azomethine imine cycloaddition-palladium-mediated cyclization process <2003T4451>, or from the reaction of A-( l-benzotriazolylalkyU-AyV-disubstitutcd hydrazine with methyl vinyl ether <1997JOC8210>. 

---