Palladium II carboxylates

Oxidative addition involving carbon-to-oxygen bonds is of relevance to the catalysis with palladium complexes. The most reactive carbon-oxygen bond is that between allylic fragments and carboxylates. The reaction starts with a palladium zero complex and the product is a ir-allylic palladium(II) carboxylate Figure 2.16. 

Metallic groups as in case (c) lead to electrophilic or even carbocation-like carbene complexes. Typical examples are Fischer-type carbene complexes [e.g. (CO)5Cr=C(Ph)OMe] and the highly reactive carbene complexes resulting from the reaction of rhodium(II) and palladium(II) carboxylates with diazoalkanes. Also platinum ylides [1,2], resulting from the reaction of diazoalkanes with platinum(Il) complexes, have a strong Pt-C o bond but only a weak Pt-C 7t bond. In situation (d) the interaction between the metal and the carbene is very weak, and highly reactive complexes showing carbene-like behavior result. Similar to uncomplexed carbenes. 

The transition metal-catalyzed cyclopropanation of alkenes is one of the most efficient methods for the preparation of cyclopropanes. In 1959 Dull and Abend reported [617] their finding that treatment of ketene diethylacetal with diazomethane in the presence of catalytic amounts of copper(I) bromide leads to the formation of cyclopropanone diethylacetal. The same year Wittig described the cyclopropanation of cyclohexene with diazomethane and zinc(II) iodide [494]. Since then many variations and improvements of this reaction have been reported. Today a large number of transition metal complexes are known which react with diazoalkanes or other carbene precursors to yield intermediates capable of cyclopropanating olefins (Figure 3.32). However, from the commonly used catalysts of this type (rhodium(II) or palladium(II) carboxylates, copper salts) no carbene complexes have yet been identified spectroscopically. 

Fig. 7. Synthesis of palladium(II) carboxylates and their complexes with alkoxystilbazoles.

Palladium(II) acetate is usually prepared by the reaction of Pd sponge in hot glacial acetic acid with nitric acid as oxidant. A slight excess of Pd sponge must be used to make sure that all the HNO3 is consumed. Several other palladium(II) carboxylates can be obtained similarly. The crystal-structure determination of the acetate reveals a trimeric structure with bridging acetates in the solid state (1). Thus, the compound is better formulated as [Pd(/u,-02CMe)2]3. 

General Methods.— The cyclopropanation of alkenes with diazocarbonyl compounds is one of the most widely used procedures for the synthesis of functionalized cyclopropanes. This year has seen the introduction of molybdenum hexacarbonyl/ palladium(ii) carboxylate, and iodorhodium(lll) mesotetraphenylporphrin as useful catalysts for this method of cyclopropanation. Reactions between diazomethane and alkenes often lead to pyrazolines [e.g, (1)] by 1,3-dipolar cycloaddition. Whereas thermolyses of these pyrazolines lead mostly to olefinic products [e.g, (3)], Martelli and Gree have now shown that Ce ions in acetone at 0 °C catalyses their decomposition to give largely cyclopropanes [e.g. (2)]. ... 

Transition metal catalysis offers, in fact, a powerful means to mediate their reactivity and selectivity since the end of the last century, copper catalysis was largely applied in this context. More recently, the discovery of efficient catalysis by Group VIII complexes (particularly of rhodium(II) carboxylates, and (in some particular cases) of palladium(II) carboxylates)) now offers novel opportunities for preparative chemistry. 

Alkenes can also be precursor to TC-allyl palladium complexes when treated with palladium(II) carboxylates that in turn react under 3-hydride elimination to yield an overall oxidation reaction.This reaction, being discovered over 50 years ago, is mostly performed with copper as reoxidant. This sp C-H activation is also the basis of other palladium-catalyzed reactions (see 10.3). 

As foretold in the introduction, ring formation via attack on a double bond in the endo-trig mode is not well exemplified. The palladium(II) catalyzed oxidative cyclization of o-aminostyrenes to indoles has been described (78JA5800). The treatment of o-methyl-selenocinnamates with bromine in pyridine gives excellent yields of benzoselenophene-2-carboxylates (Scheme 10a) (77BSF157). The base promoted conversion of dienoic thioamides to 2-aminothiophenes is another synthetically useful example of this type (Scheme 10b) (73RTC1331). 

Treatment of ethyl 1 W-azepine-l-carboxylate with palladium(II) acetate in benzene, or in an aprotic solvent, results in ring contraction (see Section 3.1.2.4.) or ring opening (vide infra), respectively, however, with palladium(II) acetate in acetic acid ethyl 2,3-diacetoxy-2,3-dihydro-l//-azepine-l-carboxylate (6) is formed as the major product along with ( , )-hexa-2,4-dienedial.243... 

The reaction of l//-l,2-diazepines with palladium(II) acetate in the presence of sodium acetate gives dienes in low yield, e.g. the reaction of ethyl l/f-l,2-diazepine-l-carboxylate (1).91,92... 

Cooper(I) carboxylates give esters with primary (including neopentyl without rearrangement), secondary, and tertiary alkyl, allylic, and vinylic halides. A simple Sn mechanism is obviously precluded in this case. Vinylic halides can be converted to vinylic acetates by treatment with sodium acetate if palladium(II) chloride is present. ... 

The palladium may then be considered as either Pd° ligated by a proton or as Pd11 ligated by a hydride,376 albeit that the very negative shift of the H-NMR signal is more indicative of a hydride linked to a palladium(II) center. This is why this reaction is also considered as an oxidative addition.376 When weak carboxylic acids are involved (e.g., acetic acid, formic acid), the reaction is regarded as an oxidative addition, i.e., insertion of palladium(0) into the H X bond (see Equation (2)) 367,376... 

The reaction of alcohols with CO was catalyzed by Pd compounds, iodides and/or bromides, and amides (or thioamides). Thus, MeOH was carbonylated in the presence of Pd acetate, NiCl2, tV-methylpyrrolidone, Mel, and Lil to give HOAc. AcOH is prepared by the reaction of MeOH with CO in the presence of a catalyst system comprising a Pd compound, an ionic Br or I compound other than HBr or HI, a sulfone or sulfoxide, and, in some cases, a Ni compound and a phosphine oxide or a phosphinic acid.60 Palladium(II) salts catalyze the carbonylation of methyl iodide in methanol to methyl acetate in the presence of an excess of iodide, even without amine or phosphine co-ligands platinum(II) salts are less effective.61 A novel Pd11 complex (13) is a highly efficient catalyst for the carbonylation of organic alcohols and alkenes to carboxylic acids/esters.62... 

The reaction of benzotriazoles with aryl halides catalyzed by a mixture of Pd(dppe)Cl2 (DPPE = bis-(diphenylphosphino)ethane) or Pd(dppf)Cl2, copper(I)iodide or copper(II)carboxylates, and a phase-transfer catalyst has been shown to proceed in good yield in DMF solvent.104 Both copper and palladium were required for these reactions to occur at the N-l position in high yields. Similar results for the coupling of amines with aryliodonium salts in aqueous solvent were observed.105... 

Brief mentions of kinetics and mechanisms of reactions of nitrogen bases with a selection of palladium(II) complexes with ammine, amines, pyridine-2-carboxylate, pyridoxine, and related ligands are included in a review of analogous platinum(II) reactions (194). 

The use of a lipophilic zinc(II) macrocycle complex, 1-hexadecyl-1,4,7,10-tetraazacyclododecane, to catalyze hydrolysis of lipophilic esters, both phosphate and carboxy (425), links this Section to the previous Section. Here, and in studies of the catalysis of hydrolysis of 4-nitrophenyl acetate by the Zn2+ and Co2+ complexes of tris(4,5-di-n-propyl-2 -imidazolyl)phosphine (426) and of a phosphate triester, a phos-phonate diester, and O-isopropyl methylfluorophosphonate (Sarin) by [Cu(A(A(A/,-trimethyl-A/,-tetradecylethylenediamine)l (427), various micellar effects have been brought into play. Catalysis of carboxylic ester hydrolysis is more effectively catalyzed by A"-methylimidazole-functionalized gold nanoparticles than by micellar catalysis (428). Other reports on mechanisms of metal-assisted carboxy ester hydrolyses deal with copper(II) (429), zinc(II) (430,431), and palladium(II) (432). 

Thermal decarboxylation of pyrimidylcarboxylic organotin esters is another means to prepare the corresponding stannylpyrimidines [33]. This method obviates the intermediacy of lithiated pyrimidine species that would undergo undesired reactions at higher temperatures. The decarboxylation occurs at the activated positions. Therefore, thermal decarboxylation of tributyltin carboxylate 62, derived from refluxing carboxylic acid 61 with bis(tributyltin) oxide, provided 4-stannylpyrimidine 63. Addition of certain Pd(II) complexes such as bis(acetonitrile)palladium(II) dichloride improved the yields, whereas AIBN and illumination failed to significantly affect the yield. 

Several examples have been reported of the use of palladium-mediated oxidation reactions of alcohols and alkyl halides. Palladium(II) acetate in the presence of iodobenzene converts primary and secondary alcohols into carbonyl compounds under solid-liquid two-phase conditions [20], However, other than there being no further oxidation to carboxylic acids, the procedure has little to commend it over other methods. It is relatively slow with reaction times in the order of 2 days needed to achieve yields of 55-100%. 

The cyclodehydrohalogenation of 2-halo-Ar,AT-diarylamines is analogous to the classical Heck reaction [114-116] and represents a palladium(0)-catalyzed process (Scheme 28). Cyclization of the diarylamine 78 with a palladium(O) catalyst, generated in situ by reduction of palladium(II) with triethylamine, affords carbazole-1-carboxylic acid 79 in 73% yield [122]. 

It has been proposed that in this reaction CO2 reacts as an electrophile with [ArPd (PPh3)2] formed by reduction of the aryl-palladium(II) [102]. Aryl chlorides react too slowly with Pd° to enable an efficient carboxylation reaction. On the other hand aryl triflate and aryl bromide have similar reactivity. The synthesis of aryl carboxylic acids can then be obtained from phenols via the formation of the corresponding aryltriflate (Eq. 15) [29, 30] ... 

Because of the high nucleophilicity and reactivity of diazoalkanes, catalytic decomposition occurs readily, not only with a wide range of transition metal complexes but also with Brpnsted or Lewis acids. Well-established catalysts for diazodecomposition include zinc halides [638,639], palladium(II) acetate [640-642], rhodium(II) carboxylates [626,643] and copper(I) triflate [636]. Copper(II)... 

Methyl 5-fluoro-4-(trifluoromethylsulfonyloxy)-2,3-dihydro-l-methyl-7-0X0-1//,7//-pyrido[3,2,l-iy]cinnoline-8-carboxylate(68,R = Me,R = R = H, R = F, R = Me, R = CF3SO2O) was reacted with 3-tributylstannyl-2-cyclohexen-l-one in the presence of lithium chloride and bis(triphenyl-phosphine)palladium(II) chloride in tetrahydrofuran for 3 days to give a 4-(3-oxo-l-cyclohexen-l-yl)derivative (92EUP470578). 

One year later, we extended the aforementioned palladium(II)-catalyzed approach to a series of 6-oxygenated carbazole alkaloids, glycozoline (86), glycozolinine (glycozolinol) (91), glycomaurrol (92), micromeline (100), and methyl 6-methoxycarbazole-3-carboxylate (104) (547). The palladium(0)-catalyzed coupling of 4-bromoanisole (670) and p-toluidine (1028), followed by palladium(II)-catalyzed oxidative cyclization, afforded directly glycozoline (86). 

An efficient chemical process for closing a diphenylamine is that using palladium(II) acetate (2 mol for substrates carrying electron-withdrawing groups) in acetic acid-methanesulfonic acid. Carbazole formation has been achieved with alkyl-, halo-, nitro-, and carboxyl-substituted diphenylamines. 1-Chlorocarbazole and carbazol-l-yl carboxylic acid as examples were efficiently prepared. - This is probably the best method now available for cyclizing diphenylamines. 

We reported the use of M-heterocyclic carbene complexes (NHC) for the catalytic activation of methane [55,56]. We found that solutions of N-heterocyclic carbene complexes of palladium(II) in carboxylic acids catalyze the conversion of methane to the corresponding methylesters. The high thermal stability of palladium(II) carbene complexes could be shown for complex 18 (Scheme 22), which we also structurally characterized [120]. An extraordinary feature is the unprecedented resistance of the palladium-NHC-complexes 18-22 under the acidic oxidizing conditions which are necessary for the CH-activation and functionalization. 

If the reaction mixture also contains a nucleophile, then the acyl-palladium complex might undergo displacement of the metal, which usually leads to the formation of a carboxylic acid derivative. The side product in this process is a palladium(II) complex that undergoes reductive elimination to regenerate the catalytically active palladium(O) complex. 

For example, a homopolymer of norbornene carboxylic acid butyl ester can be prepared by addition polymerization using tricyclohex-ylphosphine and palladium(II) acetylacetonate as a catalyst (9). 

---