Palladium hydration

Catalyst A mixture of 5.26 g of rhodium chloride trihydrate, 0.34 g of palladium chloride, 18 g of carbon (Darco G-60), and 200 ml of water is rapidly stirred and heated to 80°. A solution of lithium hydroxide hydrate (2.7 g) in 10 ml of water is added in one portion and the heating discontinued. Stirring is continued overnight, after which the mixture is filtered and washed with 100 ml of 0.5 % aqueous acetic acid. The product is dried in a vacuum oven at 65°. About 20 g of the catalyst is thus obtained. 

The colloidal palladium solution is prepared as follows A solution of a palladium salt is added to a solution of an alkali salt of an acid of high molecular weight, the sodium salt of protalbinic acid being suitable. An excess of alkali dissolves the precipitate formed, and the solution contains tine palladium in the form of a hydrosol of its hydroxide. The solution is purified by dialysis, and the hydroxide reduced with hydrazine hydrate. On further dialysis and evaporation to dryness a water-soluble product is obtained, consisting of colloidal palladium and sodium protalbinate, the latter acting as a protective colloid. 

The important oxides are black PdO and brown Pt02. The former can be made by heating palladium in oxygen other methods include heating PdCl2 in an NaN03 melt at 520°C. A hydrated form precipitates from aqueous solution, e.g. when Pd(N03)2 solution is boiled. It has 4-coordinate square planar palladium (Figure 3.8). 

Diphenylbutadiene (16, 28) In yields of 50 per cent by reduction of 0-bro-mostyrene with hydrazine hydrate in the presence of a palladium catalyst and alco-... 

Chitosan (Fig. 27) was deposited on sihca by precipitation. The palladium complex was shown to promote the enantioselective hydrogenation of ketones [80] with the results being highly dependent on the structure of the substrate. In the case of aromatic ketones, both yield and enantioselectiv-ity depend on the N/Pd molar ratio. Low palladium contents favored enan-tioselectivity but reduced the yield. Very high conversions were obtained with aliphatic ketones, although with modest enantioselectivities. More recently, the immobilized chitosan-Co complex was described as a catalyst for the enantioselective hydration of 1-octene [81]. Under optimal conditions, namely Co content 0.5 mmolg and 1-octene/Co molar ratio of 50, a 98% yield and 98% ee were obtained and the catalyst was reused five times without loss of activity or enantioselectivity. 

Wacker olefin oxidation, which is depicted in its simplest form in Eq. (6.33), contains palladium( 11)-catalyzed hydration of olefin in its important step (Eq. 6.34) and is discussed extensively [62]. In this review article we introduce two asymmetric Wacker type reactions. 

Several cationic palladium(II) aqua complexes, [Pd(H20)4], cis-[PdL(H20)2] (L = en, methionine methyl ester, l,5-dithiacycloocta-3-ol), and [Pd(dien)(H20)], serve as the active catalyst for the selective hydration of various nitriles to the corresponding carboxamides, e.g., CHCI2CN was hydrated to CHCl2C(0)NH2 in the presence of... 

The intramolecular addition of the O-H bond to alkynes catalyzed by palladium complexes has been developed by K. Utimoto et al. (Eq. 6.59) [104]. An alkynyl alcohol can be converted to a cyclic alkenyl ether in the presence of a catalytic amount of [PdCl2(PhCN)2 or [PdCl2(MeCN)2] in ether or THE at room temperature. When the reaction was carried out in MeCN-H20 under reflux in the presence of a catalytic amount of PdCl2, hydration of the acetylenic alcohol occurred and the ketoalcohol was obtained in good yield instead. 

The hydration of propylene with sulfuric acid catalyst in high-temperature water was investigated using a flow reaction system.31 The major product is isopropanol. A biopolymer-metal complex, wool-supported palladium-iron complex (wool-Pd-Fe), has been found to be a highly active catalyst for the hydration of some alkenes to the corresponding alcohols. The yield is greatly affected by the Pd/Fe molar ratio in the wool-Pd-Fe complex catalyst and the catalyst can be reused several times without remarkable change in the catalytic activity.32... 

Kostic et al. reported the use of various palladium(II) aqua complexes as catalysts for the hydration and alcoholysis of nitriles,435,456 decomposition of urea to carbon dioxide and ammonia, and alcoholysis of urea to ammonia and various carbamate esters.457 Labile aqua or other solvent ligands can be displaced by a substrate. In many cases, the coordinated substrate thus becomes activated toward nucleophilic addition of water or alcohols. 

Kostic et al. recently reported the use of various palladium(II) aqua complexes as catalysts for the hydration of nitriles.456 crossrefil. 34 Reactivity of coordination These complexes, some of which are shown in Figure 36, also catalyze hydrolytic cleavage of peptides, decomposition of urea to carbon dioxide and ammonia, and alcoholysis of urea to ammonia and various carbamate esters.420-424, 427,429,456,457 Qggj-jy palladium(II) aqua complexes are versatile catalysts for hydrolytic reactions. Their catalytic properties arise from the presence of labile water or other solvent ligands which can be displaced by a substrate. In many cases the coordinated substrate becomes activated toward nucleophilic additions of water/hydroxide or alcohols. New palladium(II) complexes cis-[Pd(dtod)Cl2] and c - Pd(dtod)(sol)2]2+ contain the bidentate ligand 3,6-dithiaoctane-l,8-diol (dtod) and unidentate ligands, chloride anions, or the solvent (sol) molecules. The latter complex is an efficient catalyst for the hydration and methanolysis of nitriles, reactions shown in Equation (3) 435... 

The use of hydrazine hydrate in anhydrous methanol with 5% palladium on charcoal under an inert atmosphere gave excellent results for the reduction of l-benzyl-4-nitroimidazole (72 R1 = CH2Ph, R2 = H) with compound (71 R1 = CH2Ph, R2 = H) being isolated as its hydrochloride salt (96%) (74JMC1168). 

Meanwhile, Wacker Chemie developed the palladium-copper-catalyzed oxidative hydration of ethylene to acetaldehyde. In 1965 BASF described a high-pressure process for the carbonylation of methanol to acetic acid using an iodide-promoted cobalt catalyst (/, 2), and then in 1968, Paulik and Roth of Monsanto Company announced the discovery of a low-pressure carbonylation of methanol using an iodide-promoted rhodium or iridium catalyst (J). In 1970 Monsanto started up a large plant based on the rhodium catalyst. 

Pyrazoles were synthesized in the authors laboratory by Le Blanc et al. from the epoxy-ketone as already stated in Sect. 3.1.1a, Scheme 35 [80]. The synthetic strategy employed by Le Blanc et al. [80] was based upon that the strategy published by Bhat et al. [81] who also described the synthesis of pyrazoles but did not report cytotoxic evaluation on the synthesized compounds. Scheme 48 shows the synthesis of the most active compound (178). Dissolution of the epoxide (179) with a xylenes followed by treatment with p-toluenesulfonic acid and hydrazine hydrate produced the pure nitro-pyrazole 180 in good yield (60%). Catalytic hydrogenation with palladium on activated carbon allowed the amino-pyrazole (178) to be obtained in a pure form. This synthesis allowed relatively large numbers of compounds to be produced as the crude product was sufficiently pure. Yield, reaction time, and purification compared to reported approaches were improved [50, 61, and 81]. Cytotoxicity of these pyrazole analogs was disappointing. The planarity of these compounds may account for this, as CA-4, 7 is a twisted molecule. 

---