Olefin copolymerizations with

In summary, the prediction that (E)-(Z) selectivity in the ethene/intemal olefins copolymerization with group 4 metallocenes can be achieved by using ligands of suitable symmetry has been proved. In particular, it has been shown that C2- and Os-symmetric metallocenes are able to copolymerize ethene with (Z)- and ( >butene, respectively. 

Copolymerization Parameters for Ethylene/a-Olefin Copolymerization with Various Metallocene/MAO Catalysts 1... 

Up to now, palladium complexes do not play a significant role in the hydroformylation of olefins [1]. However, because of their widespread use in the related hydrocarboxylation, hydroesterification, and olefin copolymerization with CO [2], occasionally their utility for hydroformylation was elucidated [3]. Moreover, palladium catalysts have been used for the hydroformylation of aryl and enol triflates to produce the corresponding unsaturated aldehydes [4]. 

J.P. Hogan, Olefin copolymerization with supported metal oxide catalysts, in High Polymers Vol. XVIIL Copolymerization, G.E. Ham, Ed., Interscience Publishers John Wiley and Sons, Chap III, pp. 89-147, 1964. 

Oct-2-enylsuccinic anhydride, 166 Octyl acrylate, MA copolymerization, 296, 521, 522 a-Olefin copolymerizations, with MA by Ziegler, 289, 293... 

More than fifty olefin chemical reactions have been described [24-26]. The 1-olefins copolymerize with many monomers, including various olefins, vinyl esters, acrylic acid, acrylic acid esters, sulfur dioxide, and carbon monoxide [3, 27 29]. The principal industrial... 

Figure 10 Functionalized olefins copolymerized with carbon monoxide by Pd complex bearing Me-DUPHOS or BINAPHOS.

Fig. 2. Dependence of olefin reactivity on its carbon atom number when linear a-olefins are copolymerized with ethylene.

Most Kaminsky catalysts contain only one type of active center. They produce ethylene—a-olefin copolymers with uniform compositional distributions and quite narrow MWDs which, at their limit, can be characterized by M.Jratios of about 2.0 and MFR of about 15. These features of the catalysts determine their first appHcations in the specialty resin area, to be used in the synthesis of either uniformly branched VLDPE resins or completely amorphous PE plastomers. Kaminsky catalysts have been gradually replacing Ziegler catalysts in the manufacture of certain commodity LLDPE products. They also faciUtate the copolymerization of ethylene with cycHc dienes such as cyclopentene and norhornene (33,34). These copolymers are compositionaHy uniform and can be used as LLDPE resins with special properties. Ethylene—norhornene copolymers are resistant to chemicals and heat, have high glass transitions, and very high transparency which makes them suitable for polymer optical fibers (34). 

Chemical Properties. Higher a-olefins are exceedingly reactive because their double bond provides the reactive site for catalytic activation as well as numerous radical and ionic reactions. These olefins also participate in additional reactions, such as oxidations, hydrogenation, double-bond isomerization, complex formation with transition-metal derivatives, polymerization, and copolymerization with other olefins in the presence of Ziegler-Natta, metallocene, and cationic catalysts. All olefins readily form peroxides by exposure to air. 

HMD was originally produced by Du Pont as a coproduct in the manufacture of Qiana fiber. Du Pont subsequently sold the product to Bayer. In the 1990s MDA is hydrogenated by Air Products for Bayer (see Amines, aromatic-methylenedianiline). Commercial HMDI is a mixture of three stereoisomers. Semicommercial aUphatic diisocyanates include /n j -cyclohexane-l,4-diisocyanate (CHDI) and y -tetramethylxylylene diisocyanate (TMXDI). A coproduct in the production of TMXDI is y -isopropenyl-a,a-dimethylben2yl isocyanate (TMI), which can be copolymerized with other olefins to give aUphatic polyisocyanates. 

Miscellaneous Copolymers. VP has been employed as a termonomer with various acryUc monomer—monomer combinations, especially to afford resins usehil as hair fixatives. Because of major differences in reactivity, VP can be copolymerized with alpha-olefins, but the products are actually PVP grafted with olefin or olefin oligomers (151,152). Likewise styrene can be polymerized in the presence of PVP and the resulting dispersion is unusually stable, suggesting that this added resistance to separation is caused by some grafting of styrene onto PVP (153). The Hterature contains innumerable references to other copolymers but at present (ca 1997), those reviewed in this article are the only ones known to have commercial significance. 

Butadiene can also be copolymerized with a large number of other olefins (224) and SO2 (225). 

There have been other approaches to obtaining rubber/metal adhesion besides primers or additives consisting of phenolics or epoxies plus halogenated elastomers. For example, carboxylated polymers (olefins and diolefins copolymerized with acrylic acid monomers) have shown excellent adhesion to metals. Very little carboxyl is necessary, and polymers with carboxyl contents as low as 0.1% show good adhesion when laminated to bare steel. When these materials possess... 

Ethylene reacts by addition to many inexpensive reagents such as water, chlorine, hydrogen chloride, and oxygen to produce valuable chemicals. It can be initiated by free radicals or by coordination catalysts to produce polyethylene, the largest-volume thermoplastic polymer. It can also be copolymerized with other olefins producing polymers with improved properties. Eor example, when ethylene is polymerized with propylene, a thermoplastic elastomer is obtained. Eigure 7-1 illustrates the most important chemicals based on ethylene. 

Methyl-2-furaldehyde gave a similar overall behaviour, but a penultimate effect was observed in its copolymerization with isopropenylbenzene whereby two molecules of the aldehyde could add together if the penultimate unit in the growing chain was from the olefin. This was borne out by the copolymers composition and spectra. The values of the reactivity ratios showed this interesting behaviour rx = 1.0 0.1, r2 = 0.0 0.1. An apparent paradox occurred the aldehyde, which could not homo-polymerize, had equal probability of homo- and copolymerization and the olefin, which homopolymerized readily, could only alternate. The structure arising from this situation was close to a regular sequence of the type ... 

It has been shown by Barb and by Dainton and Ivin that a 1 1 complex formed from the unsaturated monomer (n-butene or styrene) and sulfur dioxide, and not the latter alone, figures as the comonomer reactant in vinyl monomer-sulfur dioxide polymerizations. Thus the copolymer composition may be interpreted by assuming that this complex copolymerizes with the olefin, or unsaturated monomer. The copolymerization of ethylene and carbon monoxide may similarly involve a 1 1 complex (Barb, 1953). 

Water-soluble dicationic palladium(II) complexes [(R.2P(CH2)3PR.2)Pd-(NCMe)2][BF4]2 proved to be highly active in the carbon monox-ide/ethene copolymerization under biphasic conditions (water-toluene). In the presence of an emulsifier and methanol as activator, the catalytic activity increased by a factor of about three. Also higher olefins could be successfully incorporated into the copolymerization with CO and the terpolymerization with ethene and CO.184... 

Palladium(II) complexes possessing bidentate ligands are known to efficiently catalyze the copolymerization of olefins with carbon monoxide to form polyketones.594-596 Sulfur dioxide is an attractive monomer for catalytic copolymerizations with olefins since S02, like CO, is known to undergo facile insertion reactions into a variety of transition metal-alkyl bonds. Indeed, Drent has patented alternating copolymerization of ethylene with S02 using various palladium(II) complexes.597 In 1998, Sen and coworkers also reported that [(dppp)PdMe(NCMe)]BF4 was an effective catalyst for the copolymerization of S02 with ethylene, propylene, and cyclopentene.598 There is a report of the insertion reactions of S02 into PdII-methyl bonds and the attempted spectroscopic detection of the copolymerization of ethylene and S02.599... 

These catalysts represent the current state-of-the-art in ethylene copolymerization with polar olefinic monomers, being able to copolymerize a wide variety of polar monomers containing both O and N heteroatoms to generate completely linear, high molecular weight, random copolymers. There are leads to enhance the modest activity of these catalysts, and it will be interesting to watch further developments over the next few years. 

Scheme 11 Catalyst deactivation routes in copolymerizations with polar olefins a P-elimination of a leaving group to afford allylic or dimeric species, b poisoning by N-complexation in the attempted copolymerization of acrylonitrile...

The chain-end stereocontrol for olefin polymerizations leads generally to lower stereoselectivities (differences in activation energy for insertion of the two enantiofaces generally lower than 2 kcal/mol) than the chiral site stereo-control.18131132 For this reason, the corresponding catalytic systems have not reached industrial relevance for propene homopolymerization. However, some of them are widely used for propene copolymerization with ethene. 

---