Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Palladium carbonyl compounds

Transition metals such as Mn, Fe, Ru, Co, Rh, Ni and their metal compounds easily react with carbon monoxide to afford their metal carbonyl compounds (M ,(CO) ). But no correspond palladium compound (Pd (CO) ) is isolated. However, if the palladium is coordinated by an electron-donating compound such as phosphine and SO3F, the palladium atom is able to form stable compounds with carbon monoxide [36-49]. For example, palladium carbonyl compounds are prepared by the reaction of palladium phosphine with carbon monoxide or by the reaction of palladium compounds with phosphine in the presence of carbon monoxide as shown in eqs. (20.18) and (20.19) [39]. [Pg.440]

Reduction of unsaturated carbonyl compounds to the saturated carbonyl is achieved readily and in high yield. Over palladium the reduction will come to a near halt except under vigorous conditions (73). If an aryl carbonyl compound, or a vinylogous aryl carbonyl, such as in cinnamaldehyde is employed, some reduction of the carbonyl may occur as well. Carbonyl reduction can be diminished or stopped completely by addition of small amounts of potassium acetate (i5) to palladium catalysts. Other effective inhibitors are ferrous salts, such asferroussulfate, at a level of about one atom of iron per atom of palladium. The ferrous salt can be simply added to the hydrogenation solution (94). Homogeneous catalysts are not very effective in hydrogenation of unsaturated aldehydes because of the tendencies of these catalysts to promote decarbonylation. [Pg.40]

Reductive cleavage of phenylhydrazones of carbonyl compounds provides a route to amines. The reduction is carried out conveniently in ethanol containing ammonia over palladium-on-carbon. Ammonia is used to minimize formation of secondary amines, derived by addition of the initially formed amine to the starting material (160). Alternatively, a two-phase system of benzene, cyclohexane, toluene, or dioxane and aqueous hydrochloric acid can be used. [Pg.169]

Alkenes are reduced by addition of H2 in the presence of a catalyst such as platinum or palladium to yield alkanes, a process called catalytic hydrogenation. Alkenes are also oxidized by reaction with a peroxyacid to give epoxides, which can be converted into lTans-l,2-diols by acid-catalyzed epoxide hydrolysis. The corresponding cis-l,2-diols can be made directly from alkenes by hydroxylation with 0s04. Alkenes can also be cleaved to produce carbonyl compounds by reaction with ozone, followed by reduction with zinc metal. [Pg.246]

Ni(CO)4 is a most important nickel carbonyl compound and can even be prepared directly from its constituents yet the corresponding palladium... [Pg.195]

The palladium and platinum metals also form carbonyl compounds. Of the expected compounds Pd(CO)4, Pt(CO)4, Ru(CO)5, Os (CO) 5, Mo-(CO)e, and W(CO)6 only Mo(CO)e has been prepared, although some unsaturated ruthenium carbonyls have been prepared. The compounds Pd(CO)2Cl2, Pt(CO)2Cl2, K[PtCOCl3], etc., show the stability of the four dsp2 bonds. It would be interesting to determine whether or not each CO is bonded to two metal atoms in compounds such as [Pt(CO)Cl2]2, whose structure is predicted to be... [Pg.97]

As mentioned in Section 3.2, hydrogenation is by far the most investigated catalytic reaction and palladium the most commonly employed metal, followed by platinum. The most common substrates for catalytic hydrogenation tests are simple alkenes, cyclic alkenes and unsaturated carbonylic compounds. In the latter case, conjugated substrates (a,P-unsaturated aldehydes, acrylic acid) have received particular attention. [Pg.223]

Palladium-catalysed asymmetrie allylations of various carbonyl compounds have been studied by Hiroi et al. using various types of chiral sulfonamides derived from a-amino acids. In particular, the chiral bidentate phosphinyl sulfonamide derived from (5)-proline and depicted in Scheme 1.63 was employed in the presence of palladium to eatalyse the allylation of methyl aminoacetate diphenyl ketimine with allyl aeetate, leading to the eorresponding (7 )-product with a moderate enantioseleetivity of 62% ee. This ligand was also applied to the allylation of a series of other nueleophiles, as shown in Seheme 1.63, providing the eorresponding allylated produets in moderate enantioseleetivities. [Pg.50]

Thus far, we have discovered and demonstrated a new and effident method for the synthesis of indoles from various carbonyl compounds. This, in conjunction with the use of alkyries in the palladium-catalyzed indolization, widens the spectrum of indoles that can be prepared by these means. The simple procedure, mild reaction conditions, and ready availability of the starting materials render these methods valuable additions to indole chemistry. We next extended this method to the synthesis of the indole core of a PGD2 receptor antagonist, laropiprant 3. [Pg.139]

The palladium-catalyzed carbonylation of aryl halides in the presence of various nucleophiles is a convenient method for synthesizing various aromatic carbonyl compounds (e.g., acids, esters, amides, thioesters, aldehydes, and ketones). Aromatic acids bearing different aromatic fragments and having various substituents on the benzene ring have been prepared from aryl iodides at room temperature under 1 atm... [Pg.184]

The allylation of carbonyl compounds in aqueous media with SnCl2 can also employ allylic alcohols (Eq. 8.39)84 or carboxylates85 in the presence of a palladium catalyst. The diastereoselectivity of the reactions with substituted crotyl alcohols was solvent dependent. Improved diastereoselectivity was obtained when a mixture of water and THF or DMSO was used, instead of the organic solvent alone. [Pg.231]

The allylation of aldehydes can be carried out using stannous chloride and catalytic cupric chloride or copper in aqueous media." In-situ probing provides indirect (NMR, CV) and direct (MS) evidence for the copper(I)-catalyzed formation of an allyltrihalostannane intermediate in very high concentration in water (Scheme 8.6). Hydrophilic palladium complex also efficiently catalyzes the allylation of carbonyl compounds with allyl chlorides or allyl alcohols with SnCl2 under aqueous-organic... [Pg.233]

Palladium catalyzes allylation of carbonyl compounds with various ally lie compounds using In-InCl3 in aqueous media (Eq. 8.66).158 Various allylic compounds can be effectively applied via the formation of TT-allylpalladium(II) intermediates and their transmetalation with indium in the presence of indium trichloride in aqueous media. [Pg.250]

Nickel(O) complexes are extremely effective for the dimerization and oligomerization of conjugated dienes [8,9]. Two molecules of 1,3-butadiene readily undergo oxidative cyclization with a Ni(0) metal to form bis-allylnickel species. Palladium(O) complexes also form bis-allylpalladium species of structural similarity (Scheme 2). The bis-allylpalladium complexes show amphiphilic reactivity and serve as an allyl cation equivalent in the presence of appropriate nucleophiles, and also serve as an allyl anion equivalent in the presence of appropriate electrophiles. Characteristically, the bis-allylnickel species is known to date only as a nucleophile toward carbonyl compounds (Eq. 1) [10,11],... [Pg.183]

Palladium(II) acetate was found to be a good catalyst for such cyclopropanations with ethyl diazoacetate (Scheme 19) by analogy with the same transformation using diazomethane (see Sect. 2.1). The best yields were obtained with monosubstituted alkenes such as acrylic esters and methyl vinyl ketone (64-85 %), whereas they dropped to 10-30% for a,p-unsaturated carbonyl compounds bearing alkyl groups in a- or p-position such as ethyl crotonate, isophorone and methyl methacrylate 141). In none of these reactions was formation of carbene dimers observed. 7>ms-benzalaceto-phenone was cyclopropanated stereospecifically in about 50% yield PdCl2 and palladium(II) acetylacetonate were less efficient catalysts 34 >. Diazoketones may be used instead of diazoesters, as the cyclopropanation of acrylonitrile by diazoacenaph-thenone/Pd(OAc)2 (75 % yield) shows142). [Pg.125]

Air-stable palladium(O) catalyst, [(Cy3P)2Pd(H)(H20)]BF4, catalyses carbonylation of propargylic alcohols to generate dienoic acids and esters (equation 167)286. Since propar-gyl alcohols are obtained from carbonyl compounds by acetyhde addition reactions, this sequence constitutes a three-carbon homologation. a-Allenic alcohols are converted to tt-vinylacrylic acids under similar conditions (equation 168)287. [Pg.456]

Muller and co-workers reported the three-component one-pot synthesis of various pyrimidines through the in situ generation of unsaturated carbonyl compounds. The palladium catalyzed coupling of aryl halides bearing electron withdrawing substituents 7 with propargyl alcohols 8 produced unsaturated carbonyl compounds 9 after isomerization, which condensed with amidines 10 to form triaryl pyrimidines 11 . [Pg.262]

The palladium-catalyzed arylations of aromatic carbonyl compounds such as ketones,67,67a amides (Equation (60)),68 and aldehydes69 with aryl halides and triflates give the multiple arylation products similarly. [Pg.227]

The a-arylation of carbonyl compounds (sometimes in enantioselective version) such as ketones,107-115 amides,114 115 lactones,116 azlactones,117 malonates,118 piperidinones,119,120 cyanoesters,121,122 nitriles,125,124 sul-fones, trimethylsilyl enolates, nitroalkanes, esters, amino acids, or acids has been reported using palladium catalysis. The asymmetric vinylation of ketone enolates has been developed with palladium complexes bearing electron-rich chiral monodentate ligands.155... [Pg.314]

The ruthenium-, rhodium-, and palladium-catalyzed C-C bond formations involving C-H activation have been reviewed from the reaction types and mechanistic point of view.135-138 The activation of aromatic carbonyl compounds by transition metal catalyst undergoes ortho-alkylation through the carbometallation of unsaturated partner. This method offers an elegant way to activate C-H bond as a nucleophilic partner. The rhodium catalyst 112 has been used for the alkylation of benzophenone by vinyltrimethylsilane, affording the monoalkylated product 110 in 88% yield (Scheme 34). The formation of the dialkylated product is also observed in some cases. The ruthenium catalyst 113 has shown efficiency for such alkylation reactions, and n-methylacetophenone is transformed to the ortho-disubstituted acetophenone 111 in 97% yield without over-alkylation at the methyl substituent. [Pg.315]

Rhodium(i) complexes are excellent catalysts for the 1,4-addition of aryl- or 1-alkenylboron, -silicon, and -tin compounds to a,/3-unsaturated carbonyl compounds. In contrast, there are few reports on the palladium(n) complex-catalyzed 1,4-addition to enones126,126a for the easy formation of C-bound enolate, which will result in /3-hydride elimination product of Heck reaction. Previously, Cacchi et al. described the palladium(n)-catalyzed Michael addition of ArHgCl or SnAr4 to enones in acidic water.127 Recently, Miyaura and co-workers reported the 1,4-addition of arylboronic acids and boroxines to a,/3-unsaturated carbonyl compounds. A cationic palladium(n) complex [Pd(dppe)(PhCN)2](SbF6)2 was found to be an excellent catalyst for this reaction (dppe = l,2-bis(diphenyl-phosphine)ethane Scheme 42).128... [Pg.389]

Besides rhodium catalysts, palladium complex also can catalyze the addition of aryltrialkoxysilanes to a,(3-unsaturated carbonyl compounds (ketones, aldehydes) and nitroalkenes (Scheme 60).146 The addition of equimolar amounts of SbCl3 and tetrabutylammonium fluoride (TBAF) was necessary for this reaction to proceed smoothly. The arylpalladium complex, generated by the transmetallation from a putative hypercoordinate silicon compound, was considered to be the catalytically active species. [Pg.395]

Oxidative carbonylations have acquired a growing importance during the last few years, owing to the development of new and selective catalytic systems, mainly based on palladium, which are able to promote ordered sequences of transformations under mild conditions with formation of highly functionalized carbonyl compounds in one step starting from very simple building blocks. [Pg.244]

Several examples have been reported of the use of palladium-mediated oxidation reactions of alcohols and alkyl halides. Palladium(II) acetate in the presence of iodobenzene converts primary and secondary alcohols into carbonyl compounds under solid-liquid two-phase conditions [20], However, other than there being no further oxidation to carboxylic acids, the procedure has little to commend it over other methods. It is relatively slow with reaction times in the order of 2 days needed to achieve yields of 55-100%. [Pg.472]


See other pages where Palladium carbonyl compounds is mentioned: [Pg.104]    [Pg.152]    [Pg.43]    [Pg.55]    [Pg.70]    [Pg.121]    [Pg.193]    [Pg.21]    [Pg.259]    [Pg.168]    [Pg.1336]    [Pg.73]    [Pg.92]    [Pg.78]    [Pg.89]    [Pg.81]    [Pg.111]    [Pg.109]    [Pg.105]    [Pg.518]    [Pg.571]    [Pg.163]    [Pg.371]   
See also in sourсe #XX -- [ Pg.353 ]




SEARCH



Carbonyl compounds alcohol oxidations, palladium acetate

Carbonyl compounds aldehyde oxidations, palladium acetate

Carbonyl compounds oxidation, palladium catalysis

Carbonyl compounds palladium chloride catalysts

Carbonyl compounds synthesis, palladium catalysis

Metal groups carbonyl compounds, palladium-catalyzed

Mori 2 Palladium-Catalyzed Hydrocarboxylation and Related Carbonylation Reactions of 7r-Bonded Compounds

Palladium carbonylation

Palladium carbonylations

Palladium carbonyls

Palladium chloride carbonyl compounds

Palladium compounds

Palladium compounds carbonylation

Palladium compounds carbonylation

Palladium-catalyzed a-arylation of carbonyl compounds and nitriles

Unsaturated carbonyl compounds Palladium acetate

Unsaturated carbonyl compounds) Palladium

© 2024 chempedia.info