Palladium phosphines

The reaction of methyl propionate and formaldehyde in the gas phase proceeds with reasonable selectivity to MMA and MAA (ca 90%), but with conversions of only 30%. A variety of catalysts such as V—Sb on siUca-alumina (109), P—Zr, Al, boron oxide (110), and supported Fe—P (111) have been used. Methjial (dimethoxymethane) or methanol itself may be used in place of formaldehyde and often result in improved yields. Methyl propionate may be prepared in excellent yield by the reaction of ethylene and carbon monoxide in methanol over a mthenium acetylacetonate catalyst or by utilizing a palladium—phosphine ligand catalyst (112,113). 

Soderberg and coworkers have developed a palladium-phosphine-catalyzed reductive iV-het-eroannuladon of 2-nitrostyrenes forming indoles in good yields For example, reaction of 6-bromo-2-nitrostyrene with carbon monoxide in the presence of a catalytic amount of palladium diacetate (6 mol% and triphenylphosphine 124 mol% in acetonitrile at 30 gives 4-bromoindole in 86% yield fEq 10 62 Several functional groups, such as esters, ethers, bromides, tnflates, and additional nitro groups, have been shown to be compatible with the reaction conditions... 

In a Kumada-Corriu reaction, an aryl halide is oxidatively coupled with a homogeneous nickel(ll)-phosphine catalyst [2], This species reacts with a Grignard reagent to give biaryl or alkylaryl compounds. Later, palladium-phosphine complexes were also successfully applied. By this means, stereospecific transformations were achieved. 

From the beginning of the 1970s unhl the mid 1980s, several examples of the telomerization of dienes with water [76, 77] or methanol [78, 79] to isomeric mixtures of dienols or dienol ethers catalyzed by palladium-phosphine complexes in the presence of carbon dioxide have been reported. Neither the yield nor the selectivity were very high. However, when allene was employed as a diene , 3-methyl-2-meth-ylene-3-buten-l-ol was obtained with fairly good selectivity (up to 98%) (Eq. 6.43) [78]. 

Palladium-phosphine catalysts have also been used in the addition of triphenylsilane.77 In this case, the Zf-silane is formed. 

In Section 8.2.3.2, we discussed arylation of enolates and enolate equivalents using palladium catalysts. Related palladium-phosphine combinations are very effective catalysts for aromatic nucleophilic substitution reactions. For example, conversion of aryl iodides to nitriles can be done under mild conditions with Pd(PPh3)4 as a catalyst. 

A palladium catalyst with a less electron-rich ligand, 2,2-dipyridyl-methylamine-based palladium complexes (4.2), is effective for coupling of aryl iodides or bromides with terminal alkynes in the presence of pyrrolidine and tetrabutylammonium acetate (TBAB) at 100°C in water.37 However, the reactions were shown to be faster in NMP solvent than in water under the reaction conditions. Palladium-phosphinous acid (POPd) was also reported as an effective catalyst for the Sonogashira cross-coupling reaction of aryl alkynes with aryl iodides, bromides, or chlorides in water (Eq. 4.18).38... 

The studies on palladium-phosphine complexes, especially those with diphosphine ligands, have mainly been focused on the complexes of palladium in lower oxidation state of 0 and 1 84,580,581,583,766,787,788,811-816 suc]1 as [Pd2(dppm)2]2+, [Pd2(dppm)3],815 [Pd3(dppm)3(/i3-... 

Table 2 Catalysts performance for different palladium phosphine complexes with lead based co-catalyst (0.25 mM Pd, 50 eg. PbO, 400 eg. TEAB). ...

A number of examples have been reported documenting the use of palladium phosphine complexes as catalysts. The dialkyl species [PtL2R2] (L2 = dmpe, dppe, (PMe3)2 R = Me, CH2SiMe3) catalyze the reaction of [PhNH3]+ with activated alkenes (acrylonitrile, methyl acrylate, acrolein).176 Unfunctionalized alkenes prove unreactive. The reaction mechanism is believed to proceed via protonation of Pt-R by the ammonium salt (generating PhNH2 in turn) and the subsequent release of alkane to afford a vacant coordination site on the metal. Coordination of alkene then allows access into route A of the mechanism shown in Scheme 34. Protonation is also... 

In a related study, Srivastava and Collibee employed polymer-supported triphenyl-phosphine in palladium-catalyzed cyanations [142]. Commercially available resin-bound triphenylphosphine was admixed with palladium(II) acetate in N,N-dimethyl-formamide in order to generate the heterogeneous catalytic system. The mixture was stirred for 2 h under nitrogen atmosphere in a sealed microwave reaction vessel, to achieve complete formation of the active palladium-phosphine complex. The septum was then removed and equimolar amounts of zinc(II) cyanide and the requisite aryl halide were added. After purging with nitrogen and resealing, the vessel was transferred to the microwave reactor and irradiated at 140 °C for 30-50 min... 

A highly thermostable palladium-phosphine oxazoline catalytic system, shown in Eq. (11.37), has recently been reported to yield high ee under single-mode micro-wave irradiation [54, 55]. The use of this P,N-ligand catalytic system resulted in even higher ee than the P,P-ligand BINAP [56], The reactions were performed in acetonitrile (b.p. 81-82 °C) and superheating increased the temperatures up to 145 °C, as measured by means of a fluoroptic probe. 

The essential factor which differentiates the monomeric and dimeric carbonylations seems to be the presence or absence of halide ion coordinated to the palladium. The dimerization-carbonylation proceeds satisfactorily with halide-free palladium phosphine complexes. Most conveniently, Pd(OAc)2 is used with PPh3. PdCl2(PPh3)2 can be used as a catalyst with addition of an excess of bases. The reaction is carried out at 1I0°C under 50 atm of carbon monoxide pressure in alcohol. Higher... 

The carbonylation was explained by the following mechanism. Formation of dimeric 7r-allylic complex 20 from two moles of butadiene and the halide-free palladium species is followed by carbon monoxide insertion at the allylic position to give an acyl palladium complex which then collapses to give 3,8-nonadienoate by the attack of alcohol with regeneration of the zero-valent palladium phosphine complex. When halide ion is coordinated to palladium, the formation of the above dimeric 7r-allylic complex 20 is not possible, and only monomeric 7r-allylic complex 74 is formed. Carbon monoxide insertion then gives 3-pentenoate (72). 

Heck tried the reductive dimerization of isoprene in formic acid in the presence of triethylamine at room temperature using 1% palladium phosphine catalysts to give dimers in up to 79% yield (95). Better selectivity to the head-to-tail dimer was obtained by using Pd(OAc)2 with 1 1 ratio of arylphosphines. THF as solvent showed a favorable effect. In a scaled-up reaction with 0.5 mole of isoprene using 7r-allylpalladium acetate and o-tolyphosphine, the isolated yield of the dimers was 87%. The dimers contained 71% of the head-to-tail isomers. The mixture was converted into easily separable products by treatment with concentrated hydro-... 

Palladium-phosphine catalysts have been used most commonly, but a PdfOAc Z-alkyl isocyanide123 or Pdfdba) P(OEt)3 (cheaper)124 catalyst is more effective, and will bring about silastannation at room temperature, for example, Equation (33). 

One of the first results on the use of phosphine dendrimers in catalysis was reported by Dubois and co-workers [16]. They prepared dendritic architectures containing phosphorus branching points which can also serve as binding sites for metal salts. These terdentate phosphine-based dendrimers were used to incorporate cationic Pd centers in the presence of PPh3. Such cationic metalloden-dritic compounds were successfully applied as catalysts for the electrochemical reduction of C02 to CO (e.g. 9, Scheme 9) with reaction rates and selectivities comparable to those found for analogous monomeric palladium-phosphine model complexes suggesting that this catalysis did not involve cooperative effects of the different metal sites. 

Additional examples of palladium-catalyzed cross-couplings, in particular with allenylzinc compounds, can be found elsewhere [11, 15, 36]. A systematic study comparing several chiral palladium phosphine catalysts in the reaction of 4,4-di-methyl-1,2-pentadienylzinc chloride and iodobenzene revealed that an enantiomeric excess of only 25% was obtained from the best catalyst combination PdCl2 and (R,R)-DIOP [15]. The synthetic value of these transformations of donor-substituted allenes as precursors is documented by the preparation of a/l-unsaturatcd carbonyl... 

A palladium phosphine complex [e.g., BCPE = l,2-bis(l,5-cyclooctylenephos-phino)ethane] was also reported to produce propanediols and n-propanol from glycerol at 443 K under 6 MPa CO/H2 atmosphere in acidic conditions, n-Propanol is the dominant product, while a slight preference for the formation of propane-1,3-diol is seen in the diol fraction. Reactions were performed at different temperatures in the range 413-448 K. Since acrolein was monitored at high temperature, a reaction network was proposed following a sequential dehydration/hydrogenation pathway [20]. 

Keywords Carbonylation Ethene Methanol Monocarbonylation Palladium Phosphines Polyketones... 

The discovery in the early 1980s that cationic palladium-phosphine complexes catalyse the copolymerisation of carbon monoxide with ethene or a higher a-olcfin to yield perfectly alternating polyketones has since attracted continuous increasing interest [1,2]. This is because the monomers are produced in large amounts at a low cost and because polyketones represent a new class of thermoplastics of physical-mechanical and chemical properties that have wide applications [3-6]. In addition, easy functionalisation can open the way to a large number of new materials [7]. The copolymerisation has... 

Hydrosilylation of o-allylstyrene (82) with trichlorosilane in the presence of 0.3mol% of a palladium catalyst bearing triphenylphosphine has been found to produce a mixture of indane (83) and the open-chain products (84) and (85) (Scheme 11). The reaction of styrene with trichlorosilane gave a quantitative yield of 1-phenyl-l-(trichlorosilyl)ethane whereas allylbenzene did not give silylation products under the same reaction conditions. These results show that the hydropalladation process is operative in the hydrosilylation of styrene derivatives with trichlorosilane catalysed by palladium-phosphine complexes." ... 

One of the major problems with these palladium-phosphine catalysts is in that they are rather unstable under the process conditions and gradual loss of the catalytic activity and precipitation of palladium black can often be observed. The introduction of appropriately substituted DPPP derivatives (Scheme 7.16) not only increased the activity over all previous values but largely improved the stability of the catalysts, as well [57],... 

As compared to the esterification of sucrose, cataly tic etherification of sucrose provides another family of non-ionic surfactants that are much more robust than sucrose esters in the presence of water. Synthesis of sucroethers can be achieved according to two processes (1) the ring opening of epoxide in the presence of a basic catalyst and (2) the telomerization of butadiene with sucrose using a palladium-phosphine catalyst. 

The palladium-phosphine-catalyzed cycloaddition reactions of vinyloxetanes 530 with aryl isocyanates or diaryl-carbodiimides led to 4-vinyl-l,3-oxazin-2-ones 531 or l,3-oxazin-2-imines 532, respectively (Scheme 101). In the absence of phosphine ligands (PPhs, bis(diphenylphosphino)ethane (DPPE), l,3-bis(diphenylphosphino)propane (dppp), no conversion of heterocumulenes was observed. Starting from fused-bicyclic vinyloxetanes, both types of cycloadditions proceeded in a highly stereoselective fashion, affording only the r-isomers of alicycle-condensed 1,3-oxazine derivatives <1999JOC4152>. 

The carboxylation reaction shown in reaction (11) is catalyzed by both nickel and palladium phosphine complexes. For example, Ni(dppe)Cl2 (where dppe is l,2-bis(diphenylphosphino)ethane) and Pd(PPh3)2Cl2 both catalyze reaction (11) [84-86]. Mechanistic studies have been carried out on these two systems, and the results indicate that two different mechanisms are involved. In the case of the Ni complex, the first step is the reduction of Ni(dppe)Cl2 to a transient Ni(dppe) species [85]. This process occurs in two one-electron steps (reaction 12). Bromobenzene then oxidatively adds to Ni(dppe) to form Ni(dppe)(Br)(Ph), reaction (13). The resulting Ni(II) aryl species is reduced in a one-electron process to form Ni(dppe)(Ph), which reacts rapidly with CO2 to form a Ni—CO2 intermediate as shown in reaction (14). The rate-determining step for the overall catalytic reaction is the insertion of CO2 into the Ni-aryl bond, reaction (15) step 1. This reaction is followed by a final one-electron reduction to regenerate Ni(dppe), the true catalyst in the cycle (reaction 15, step 2). 

Selenium has now been added to the growing list of transition metals shown capable of catalyzing the reductive A/-heterocyclization of 2-nitrostyrenes to indoles with carbon monoxide <99TL5717>. Utilizing the palladium-phosphine catalyzed methodology, Soderberg achieved the synthesis of several 4-substituted 2-methylindole natural products isolated from TricMoma... 

Myrcenol can be prepared by treating myrcene with diethylamine to give a mixture of geranyl- and neryldiethylamine. These compounds are hydrated with a dilute acid to the corresponding hydroxydiethylamines. Deamination to myrcenol is effected by using a palladium-phosphine-cation complex as a catalyst [47]. 

---