Radicals chain oxidation mechanism

A number of reactions involving alkane photooxidation by polyoxometalates have been run under aerobic conditions. Those by PWi2O40 and Wio032 are summarized at the end of Table I (see section 5). Unfortunately these reactions, collectively, are rather uninformative with respect to mechanism. Radical chain autoxidation processes are undoubtedly present and few if any of the reported papers have addressed the requisite experiments to differentiate autoxidation from other oxidation pathways. A similar general limitation exists in the literature on photocatalytic aerobic oxidation of organic compounds by semiconductor materials [66]. 

The lubricant oxidation mechanism is free-radical in nature and the additives act on the kinetic oxidation chain by capturing the reactive species either by decomposition of the peroxides, or by deactivation of the metal. 

Thermal Oxidative Stability. ABS undergoes autoxidation and the kinetic features of the oxygen consumption reaction are consistent with an autocatalytic free-radical chain mechanism. Comparisons of the rate of oxidation of ABS with that of polybutadiene and styrene—acrylonitrile copolymer indicate that the polybutadiene component is significantly more sensitive to oxidation than the thermoplastic component (31—33). Oxidation of polybutadiene under these conditions results in embrittlement of the mbber because of cross-linking such embrittlement of the elastomer in ABS results in the loss of impact resistance. Studies have also indicated that oxidation causes detachment of the grafted styrene—acrylonitrile copolymer from the elastomer which contributes to impact deterioration (34). 

The hterature suggests that more than one mechanism may be operative for a given antiozonant, and that different mechanisms may be appHcable to different types of antiozonants. All of the evidence, however, indicates that the scavenger mechanism is the most important. All antiozonants react with ozone at a much higher rate than does the mbber which they protect. The extremely high reactivity with ozone of/)-phenylenediamines, compared to other amines, is best explained by their unique abiUty to react ftee-tadicaHy. The chemistry of ozone—/)-PDA reactions is known in some detail (30,31). The first step is beheved to be the formation of an ozone—/)-PDA adduct (32), or in some cases a radical ion. Pour competing fates for dissociation of the initial adduct have been described amine oxide formation, side-chain oxidation, nitroxide radical formation, and amino radical formation. 

Physical properties of hexachloroethane are Hsted in Table 11. Hexachloroethane is thermally cracked in the gaseous phase at 400—500°C to give tetrachloroethylene, carbon tetrachloride, and chlorine (140). The thermal decomposition may occur by means of radical-chain mechanism involving -C,C1 -C1, or CCl radicals. The decomposition is inhibited by traces of nitric oxide. Powdered 2inc reacts violentiy with hexachloroethane in alcohoHc solutions to give the metal chloride and tetrachloroethylene aluminum gives a less violent reaction (141). Hexachloroethane is unreactive with aqueous alkali and acid at moderate temperatures. However, when heated with soHd caustic above 200°C or with alcohoHc alkaHs at 100°C, decomposition to oxaHc acid takes place. 

The oxidation of hydrocarbons, including hydrocarbon polymers, takes the form of a free-radical chain reaction. As a result of mechanical shearing, exposure of ultraviolet radiation, attack by metal ions such as those of copper and manganese as well as other possible mechanisms, a hydrocarbon molecule breaks down into two radicals... 

Free-radical chain inhibitors are of considerable economic importance. The term antioxidant is commonly appUed to inhibitors that retard the free-radical chain oxidations, termed autoxidations, that can cause relatively rapid deterioration of many commercial materials derived from organic molecules, including foodstuffs, petroleum products, and plastics. The chain mechanism for autoxidation of hydrocarbons is ... 

Free-radical chain oxidation of organic molecules by molecular oxygen is often referred to as autoxidation (see Section 12.2.1). The general mechanism is outlined below. 

Bateman, Gee, Barnard, and others at the British Rubber Producers Research Association [6,7] developed a free radical chain reaction mechanism to explain the autoxidation of rubber which was later extended to other polymers and hydrocarbon compounds of technological importance [8,9]. Scheme 1 gives the main steps of the free radical chain reaction process involved in polymer oxidation and highlights the important role of hydroperoxides in the autoinitiation reaction, reaction lb and Ic. For most polymers, reaction le is rate determining and hence at normal oxygen pressures, the concentration of peroxyl radical (ROO ) is maximum and termination is favoured by reactions of ROO reactions If and Ig. 

The Tafel slopes obtained under concentrations of the chemical components that we suspect act on the initiation reaction (monomer, electrolyte, water contaminant, temperature, etc.) and that correspond to the direct discharge of the monomer on the clean electrode, allow us to obtain knowledge of the empirical kinetics of initiation and nucleation.22-36 These empirical kinetics of initiation were usually interpreted as polymerization kinetics. Monomeric oxidation generates radical cations, which by a polycondensation mechanism give the ideal linear chains ... 

Scheme 18 The reaction mechanism for the radical chain oxidation of poly(phenylhydrosilane).

Organotin(IV) compounds could be involved in other biological processes occurring in cells, specifically in peroxide oxidation of lipids. The latter process is very important from the viewpoint of physiology, and it follows a radical chain mechanism. ... 

Dicyclopentadienyltin also takes part in oxidative addition reactions with such reagents as iodomethane, diiodomethane, ethyl bromoace-tate, and diphenyl disulfide, and there is evidence that the reactions involve a radical chain-mechanism (324, 325). 

Inspired by Gif or GoAgg type chemistry [77], iron carboxylates were investigated for the oxidation of cyclohexane, recently. For example, Schmid and coworkers showed that a hexanuclear iron /t-nitrobenzoate [Fe603(0H) (p-N02C6H4C00)n(dmf)4] with an unprecedented [Fe6 03(p3-0)(p2-0H)] " core is the most active catalyst [86]. In the oxidation of cyclohexane with only 0.3 mol% of the hexanuclear iron complex, total yields up to 30% of the corresponding alcohol and ketone were achieved with 50% H2O2 (5.5-8 equiv.) as terminal oxidant. The ratio of the obtained products was between 1 1 and 1 1.5 and suggests a Haber-Weiss radical chain mechanism [87, 88] or a cyclohexyl hydroperoxide as primary oxidation product. 

H2O may be replaced by any acid, HA, and a cyclic mechanism for the breakdown of the ester is quite feasible. For oxidation in alkali the fractional order in hydroxide ion, the low kjkjy and low degree of oxygen-transfer from oxidant are taken as symptomatic of a free-radical chain reaction of the type... 

Chemical combustion is initiated by the oxidation or thermal decomposition of a fuel molecule, thereby producing reactive radical species by a chain-initiating mechanism. Radical initiation for a particular fuel/oxygen mixture can result from high-energy collisions with other molecules (M) in the system or from hydrogen-atom abstraction by 02or other radicals, as expressed in reactions 6.1-6.3 ... 

This oxidative process has been successful with ketones,244 esters,245 and lactones.246 Hydrogen peroxide can also be used as the oxidant, in which case the alcohol is formed directly.247 The mechanisms for the oxidation of enolates by oxygen is a radical chain autoxidation in which the propagation step involves electron transfer from the carbanion to a hydroperoxy radical.248... 

The reaction is retarded by the addition of the radical chain scavengers 2,6-di-/-butyl-4-methylphenol and hydroquinone. The oxidation rate is not affected by the oxygen pressure (Table 2), indicating that re-oxidation of Ce(III) in 1 is not rate limiting. The oxidation rate is first order in formaldehyde and goes through a maximum with increasing concentration of 1. All these phenomena are consistent with a chain radical mechanism of oxidation (11,12). 

The degradation process has a free radical mechanism. It is initiated by free radicals P that appear due to, for example, hydroperoxide decomposition induced thermally or by trace amounts of metal ions present in the polysaccharide. One cannot exclude even direct interaction of the polysaccharide with oxygen in its ground triplet state with biradical character. Hydroperoxidic and/or peracid moieties are easily formed by oxidation of semiacetal chain end groups. The sequence of reactions on carbon 6 of polysaccharide structural unit that ultimately may lead to chemiluminescence is shown in Scheme 11. 

The peroxide 179 dissociates in the presence of a monomer giving rise to alkoxyl (CO-) and borinate (BO-) radicals, but the latter are believed to be too stable to initiate polymerization. It should be mentioned that the molecular weight continuously increases throughout the process implying the pseudo-living mechanism for chain growth. After the completion of the process borane residue is completely oxidized into diol <2004MM6260>. Thus, the 8-boraindane molecule not only initiates the polymerization, but also is a precursor to two functionalities in the polymer chain. 

A similar mechanism of chain oxidation of olefinic hydrocarbons was observed experimentally by Bolland and Gee [53] in 1946 after a detailed study of the kinetics of the oxidation of nonsaturated compounds. Miller and Mayo [54] studied the oxidation of styrene and found that this reaction is in essence the chain copolymerization of styrene and dioxygen with production of polymeric peroxide. Rust [55] observed dihydroperoxide formation in his study of the oxidation of branched aliphatic hydrocarbons and treated this fact as the result of intramolecular isomerization of peroxyl radicals. 

In the oxidized hydrocarbon, hydroperoxides break down via three routes. First, they undergo homolytic reactions with the hydrocarbon and the products of its oxidation to form free radicals. When the oxidation of RH is chain-like, these reactions do not decrease [ROOH]. Second, the hydroperoxides interact with the radicals R , RO , and R02. In this case, ROOH is consumed by a chain mechanism. Third, hydroperoxides can heterolytically react with the products of hydrocarbon oxidation. Let us consider two of the most typical kinetic schemes of the hydroperoxide behavior in the oxidized hydrocarbon. The description of 17 different schemes of chain oxidation with different mechanisms of chain termination and intermediate product decomposition can be found in a monograph by Emanuel et al. [3]. 

Alcohols, like hydrocarbons, are oxidized by the chain mechanism. The composition of the molecular products of oxidation indicates that oxidation involves first the alcohol group and the neighboring C—H bond. This bond is broken more readily than the C—H bond of the corresponding hydrocarbon, since the unpaired electron of the formed hydroxyalkyl radical interacts with the p electrons of the oxygen atom. 

---