Other Methods of Production

Polymer processing can be of several types, including free radical, cationic, anionic, metal complex, or metal oxide catalyzed, as mentioned earlier [5], Polymers can be made by bulk polymerization, solution polymerization, suspension polymerization, or emulsion polymerization techniques [5], The automotive chemist or design engineer working for an OEM should be aware of these various manufacturing processes, which polymers are made by which process, and what characteristics can be expected from the type of process. 

---

Other methods of production iaclude hydrolysis of glycolonittile [107-16 ] with an acid (eg, H PO or H2SO2) having a piC of about 1.5—2.5 at temperatures between 100—150°C glycolonittile produced by reaction of formaldehyde with hydrogen cyanide recovery from sugar juices and hydrolysis of monohalogenated acetic acid. None of these has been commercially and economically attractive. 

Copper Hydroxide. Copper(II) hydroxide [20427-59-2] Cu(OH)2, produced by reaction of a copper salt solution and sodium hydroxide, is a blue, gelatinous, voluminous precipitate of limited stabiUty. The thermodynamically unstable copper hydroxide can be kiaetically stabilized by a suitable production method. Usually ammonia or phosphates ate iacorporated iato the hydroxide to produce a color-stable product. The ammonia processed copper hydroxide (16—19) is almost stoichiometric and copper content as high as 64% is not uncommon. The phosphate produced material (20,21) is lower ia copper (57—59%) and has a finer particle size and higher surface area than the ammonia processed hydroxide. Other methods of production generally rely on the formation of an iasoluble copper precursor prior to the formation of the hydroxide (22—26). 

The method which was most used during the war of 1914-18 was that of the action of picric acid on calcium hypochlorite. This method was not very suitable in practice, for it required as raw material a substance not easily spared during the war, when it was needed for the explosive industry. The other methods of production referred to above have been studied since the war, showing the interest of chemists in working out a method which does not require the use of a raw material of limited accessibility. 

The next step of the polymorph screening process is to collect additional data which will allow identification and characterization of each solid form. Additional material is usually required. Attempts to scale up the production of each type of material should first involve simply repeating the procedures, at larger scale, that provided each material in the first place. If this is unsuccessful, other methods of production may need to be developed. 

The iodide decomposition process for any rare metal is always more expensive than other methods of production, because of the small scale... 

The derivatives are hydroxyethyl and hydroxypropyl cellulose. AH four derivatives find numerous appHcations and there are other reactants that can be added to ceUulose, including the mixed addition of reactants lea ding to adducts of commercial significance. In the commercial production of mixed ethers there are economic factors to consider that include the efficiency of adduct additions (ca 40%), waste product disposal, and the method of product recovery and drying on a commercial scale. The products produced by equation 2 require heat and produce NaCl, a corrosive by-product, with each mole of adduct added. These products are produced by a paste process and require corrosion-resistant production units. The oxirane additions (eq. 3) are exothermic, and with the explosive nature of the oxiranes, require a dispersion diluent in their synthesis (see Cellulose ethers). 

Ethylene glycol can be produced by an electrohydrodimerization of formaldehyde (16). The process has a number of variables necessary for optimum current efficiency including pH, electrolyte, temperature, methanol concentration, electrode materials, and cell design. Other methods include production of valuable oxidized materials at the electrochemical cell s anode simultaneous with formation of glycol at the cathode (17). The compound formed at the anode maybe used for commercial value direcdy, or coupled as an oxidant in a separate process. 

Decomposition of Zircon. Zircon sand is inert and refractory. Therefore the first extractive step is to convert the zirconium and hafnium portions into active forms amenable to the subsequent processing scheme. For the production of hafnium, this is done in the United States by carbochlorination as shown in Figure 1. In the Ukraine, fluorosiUcate fusion is used. Caustic fusion is the usual starting procedure for the production of aqueous zirconium chemicals, which usually does not involve hafnium separation. Other methods of decomposing zircon such as plasma dissociation or lime fusions are used for production of some grades of zirconium oxide. 

Principal terpene alcohol components of piae oils are a-terpiueol, y-terpiueol, P-terpiueol, a-fenchol, bomeol, terpiuen-l-ol, and terpiaen-4-ol. The ethers, 1,4- and 1,8-ciaeole, are also formed by cycli2ation of the p-v( enthane-1,4- and 1,8-diols. The bicycHc alcohols, a-fenchol [512-13-0] (61) and bomeol (62), are also formed by the Wagner-Meerweiu rearrangement of the piaanyl carbonium ion and subsequent hydration. Bomeol is i7(9-l,7,7-trimethylbicyclo[2.2.1]heptan-2-ol [507-70-0]. Many other components of piae oils are also found, depending on the source of the turpentine used and the method of production. 

Pour typical weU patterns for contaminant plume containment are described in Ref. 16. The first is a pair of injection-production weUs. The second is a line of downgradient pumping weUs. The third is a pattern of injection-production weUs around the boundary of a plume. The fourth, the double-cell system, uses an inner ceU and outer recirculation ceU, with four ceUs along a line bisecting the plume in the direction of flow. Two other methods of plume containment are bio filters and a fuimel-and-gate system, which are described in the in bioremediation section. 

Continuous chlorination of benzene at 30—50°C in the presence of a Lewis acid typically yields 85% monochlorobenzene. Temperatures in the range of 150—190°C favor production of the dichlorobenzene products. The para isomer is produced in a ratio of 2—3 to 1 of the ortho isomer. Other methods of aromatic ring chlorination include use of a mixture of hydrogen chloride and air in the presence of a copper—salt catalyst, or sulfuryl chloride in the presence of aluminum chloride at ambient temperatures. Free-radical chlorination of toluene successively yields benzyl chloride, benzal chloride, and benzotrichloride. Related chlorination agents include sulfuryl chloride, tert-huty hypochlorite, and /V-ch1orosuccinimide which yield benzyl chloride under the influence of light, heat, or radical initiators. 

A chlorohydrin has been defined (1) as a compound containing both chloio and hydroxyl radicals, and chlorohydrins have been described as compounds having the chloro and the hydroxyl groups on adjacent carbon atoms (2). Common usage of the term appHes to aUphatic compounds and does not include aromatic compounds. Chlorohydrins are most easily prepared by the reaction of an alkene with chlorine and water, though other methods of preparation ate possible. The principal use of chlorohydrins has been as intermediates in the production of various oxitane compounds through dehydrochlorination. 

Other methods of preparation, eg, the reaction of CIF or BrF and CrO, yield the oxyfluoride contaminated with reactants and side reaction products. 

Many different values for room temperature mechanical properties can be found in the Hterature. The lack of agreement depends, no doubt, on the different mixtures of a and y phases of cobalt present in the material. This, on the other hand, depends on the impurities present, the method of production of the cobalt, and the treatment. 

The importance of the penicillins as a class of heterocyclic compounds derives primarily from their effectiveness in the treatment of bacterial infections in mammals (especially humans). It has been estimated that, in 1980, the worldwide production of antibiotics was 25 000 tons and, of this, approximately 17 000 tons were penicillins (81MI51103). The Food and Drug Administration has estimated that, in 1979 in the U.S.A., 30.1 x 10 prescriptions of penicillin V and 44.3 x 10 prescriptions of ampicillin/amoxicillin were dispensed. This level of usage indicates that, compared to other methods of dealing with bacterial infection, the cost-benefit properties of penicillin therapy are particularly favorable. Stated differently, penicillin treatment leads to the elimination of the pathogen in a relatively high percentage of cases of bacterial infection at a relatively low cost to the patient in terms of toxic reactions and financial resources. 

Vapor grown carbon fiber (VGCF) is the descriptive name of a class of carbon fiber which is distinctively different from other types of carbon fiber in its method of production, its unique physical characteristics, and the prospect of low cost fabrication. Simply stated, this type of carbon fiber is synthesized from the pyrolysis of hydrocarbons or carbon monoxide in the gaseous state, in the presence of a catalyst in contrast to a melt-spinning process common to other types of carbon fiber. 

Other methods of nitration that Laali investigated were with isoamyl nitrate in combination with a Bronsted or Lewis acid in several ionic liquids, with [EMIM][OTf] giving the best yields (69 %, 1.0 1.0 o p ratio). In the ionic liquid [HNEt( Pr)2] [CE3CO2] (m.p. = 92-93 °C), toluene was nitrated with a mixture of [NH4][N03] and trifluoroacetic acid (TEAH) (Scheme 5.1-37). This gave ammonium trifluoroacetate [NH4][TEA] as a by-product, which could be removed from the reaction vessel by distillation (sublimation). 

Other methods of identification include the customary preparation of derivatives, comparisons with authentic substances whenever possible, and periodate oxidation. Lately, the application of nuclear magnetic resonance spectroscopy has provided an elegant approach to the elucidation of structures and stereochemistry of various deoxy sugars (18). Microcell techniques can provide a spectrum on 5-6 mg. of sample. The practicing chemist is frequently confronted with the problem of having on hand a few milligrams of a product whose structure is unknown. It is especially in such instances that a full appreciation of the functions of mass spectrometry can be developed. 

Catalytic hydrogenation of triple bonds and the reaction with DIBAL-H usually give the eis alkene (15-11). Most of the other methods of triple-bond reduction lead to the more thermodynamically stable trans alkene. However, this is not the case with the method involving hydrolysis of boranes or with the reductions with activated zinc, hydrazine, or NH2OSO3H, which also give the cis products. 

After separation of excess amalgam a solution of MXj is added. Reaction is rapid and the desired product can be separated from the Na halide or NaCN produced. If the separation of the amalgam is incomplete it is possible for Hg to be incorporated into the product (see 8.3.3.4). To avoid this, other methods of preparing carbonyl anions can be used, such as reaction with NaBH4, Na-K and other reducing agents ", or phase-transfer methods. ... 

---