Olefin catalytic activity

Acetyl chlotide reacts with aromatic hydrocarbons and olefins in suitably inert solvents, such as carbon disulfide or petroleum ether, to furnish ketones (16). These reactions ate catalyzed by anhydrous aluminum chlotide and by other inorganic chlotides (17). The order of catalytic activity increases in the order... 

Chemical Properties. Higher a-olefins are exceedingly reactive because their double bond provides the reactive site for catalytic activation as well as numerous radical and ionic reactions. These olefins also participate in additional reactions, such as oxidations, hydrogenation, double-bond isomerization, complex formation with transition-metal derivatives, polymerization, and copolymerization with other olefins in the presence of Ziegler-Natta, metallocene, and cationic catalysts. All olefins readily form peroxides by exposure to air. 

The introduction of tritium into molecules is most commonly achieved by reductive methods, including catalytic reduction by tritium gas, PH2], of olefins, catalytic reductive replacement of halogen (Cl, Br, or I) by H2, and metal pH] hydride reduction of carbonyl compounds, eg, ketones (qv) and some esters, to tritium-labeled alcohols (5). The use of tritium-labeled building blocks, eg, pH] methyl iodide and pH]-acetic anhydride, is an alternative route to the preparation of high specific activity, tritium-labeled compounds. The use of these techniques for the synthesis of radiolabeled receptor ligands, ie, dmgs and dmg analogues, has been described ia detail ia the Hterature (6,7). 

The catalysts with the simplest compositions are pure metals, and the metals that have the simplest and most uniform surface stmctures are single crystals. Researchers have done many experiments with metal single crystals in ultrahigh vacuum chambers so that unimpeded beams of particles and radiation can be used to probe them. These surface science experiments have led to fundamental understanding of the stmctures of simple adsorbed species, such as CO, H, and small hydrocarbons, and the mechanisms of their reactions (42) they indicate that catalytic activity is often sensitive to small changes in surface stmcture. For example, paraffin hydrogenolysis reactions take place rapidly on steps and kinks of platinum surfaces but only very slowly on flat planes however, hydrogenation of olefins takes place at approximately the same rate on each kind of surface site. 

The higher activity of the catalyst [(mall)Ni(dppmo)][SbFg] in [BMIM][PFg] (TOF = 25,425 h ) relative to the reaction under identical conditions in CFF2C12 (TOF = 7591 h ) can be explained by the fast extraction of products and side products out of the catalyst layer and into the organic phase. A high concentration of internal olefins (from oligomerization and consecutive isomerization) at the catalyst is known to reduce catalytic activity, due to the formation of fairly stable Ni-olefin complexes. 

In essence the active centers for catalytic polymerization of olefins are organometallic complexes of transition metals. For this reason a search for individual organometallic compounds that would possess catalytic activity in olefin polymerization is of great interest. The first attempts to use organometallic compounds of transition metals as catalysts for olefin polymerization were made long ago [e.g. CH3TiCl3 as a catalyst for polymerization of ethylene 116). However, only in recent years as a result of the application of relatively stable organometallic compounds of transition... 

Two possible reasons may be noted by which just the coordinatively insufficient ions of the low oxidation state are necessary to provide the catalytic activity in olefin polymerization. First, the formation of the transition metal-carbon bond in the case of one-component catalysts seems to be realized through the oxidative addition of olefin to the transition metal ion that should possess the ability for a concurrent increase of degree of oxidation and coordination number (177). Second, a strong enough interaction of the monomer with the propagation center resulting in monomer activation is possible by 7r-back-donation of electrons into the antibonding orbitals of olefin that may take place only with the participation of low-valency ions of the transition metal in the formation of intermediate 71-complexes. 

Unfortunately, at present the information characterizing the properties of the active bond in polymerization catalysts is very scant. The analogy between the features of the active bonds in the propagation centers and those of the transition metal-carbon bond in individual organometallic compounds is sure to exist, but as in the initial form the latter do not show catalytic activity in olefin polymerization this analogy is restricted to its limits. 

Rennard and Kokes (39) in their paper stated directly that their purpose was just to study the catalytic activity of palladium hydride in the hydrogenation of olefins, in this case ethylene and propylene. Kokes (39a) in his article recently published in Catalysis Reviews summarizes the results of studies on such catalytic systems. 

The catalytic system studied by Rennard and Kokes was in fact very complex. It can be expected that the satisfactory prolongation of the reaction should, however, result in a deviation from the formulated kinetics. Unfortunately no investigation comparable to that of Scholten and Kon-valinka has been done in the case of olefin hydrogenation. Such a study of the catalytic activity of the pure /3-phase of palladium hydride in comparison with the a- or (a + /3)-phases would supplement our knowledge concerning catalytic hydrogenation on palladium. 

Bent ansa-metallocenes of early transition metals (especially Ti, Zr, Hf) have attracted considerable interest due to their catalytic activity in the polymerization of a-olefins. Ruthenium-catalyzed olefin metathesis has been used to connect two Cp substituents coordinated to the same metal [120c, 121a] by RCM or to connect two bent metallocenes by cross metathesis [121b]. A remarkable influence of the catalyst on E/Z selectivity was described for the latter case while first-generation catalyst 9 yields a 1 1 mixture of E- and Z-dimer 127, -127 is the only product formed with 56d (Eq. 19). 

Hexacarbonyldicobalt complexes of alkynes have served as substrates in a variety of olefin metathesis reactions. There are several reasons for complex-ing an alkyne functionality prior to the metathesis step [ 125] (a) the alkyne may chelate the ruthenium center, leading to inhibition of the catalytically active species [125d] (b) the alkyne may participate in the metathesis reaction, giving undesired enyne metathesis products [125f] (c) the linear structure of the alkyne may prevent cyclization reactions due to steric reasons [125a-d] and (d) the hexacarbonylcobalt moiety can be used for further transformations [125c,f]. 

The general catalytic cycle for the coupling of aryl-alkenyl halides with alkenes is shown in Fig. 9.6. The first step in this catalytic cycle is the oxidative addition of aryl-alkenyl halides to Pd(0). The activity of the aryl-alkenyl halides still follows the order RI > ROTf > RBr > RC1. The olefin coordinates to the Pd(II) species. The coordinated olefin inserts into Pd—R bond in a syn fashion, p-Hydrogen elimination can occur only after an internal rotation around the former double bond, as it requires at least one /I-hydrogen to be oriented syn perpendicular with respect to the halopalladium residue. The subsequent syn elimination yields an alkene and a hydridopalladium halide. This process is, however, reversible, and therefore, the thermodynamically more stable (E)-alkene is generally obtained. Reductive elimination of HX from the hydridopalladium halide in the presence of a base regenerates the catalytically active Pd(0), which can reenter the catalytic cycle. The oxidative addition has frequently assumed to be the rate-determining step. 

Oxalamidinate anions represent the most simple type of bis(amidinate) ligands in which two amidinate units are directly connected via a central C-C bond. Oxalamidinate complexes of d-transition metals have recently received increasing attention for their efficient catalytic activity in olefin polymerization reactions. Almost all the oxalamidinate ligands have been synthesized by deprotonation of the corresponding oxalic amidines [pathway (a) in Scheme 190]. More recently, it was found that carbodiimides, RN = C=NR, can be reductively coupled with metallic lithium into the oxalamidinate dianions [(RN)2C-C(NR)2] [route (c)J which are clearly useful for the preparation of dinuclear oxalamidinate complexes. The lithium complex obtained this way from N,N -di(p-tolyl)carbodiimide was crystallized from pyridine/pentane and... 

TS-l/MCM-41 catalysts synttiesized by the dry gel conversion method are shown to have hexagonal mesopores. The catalytic activity of synthesized TS-l/MCM-41 catalysts was tested with qroxidation reaction of olefins to reved that both the conversion of olefins and selectivity to epoxide are higher than those of H-MCM-41,... 

The catalytic activities of synthesized catalysts were measured for epoxidation of olefins... 

Titanium containing hexagonal mesoporous materials were synthesized by the modified hydrothermal synthesis method. The synthesized Ti-MCM-41 has hi y ordered hexa rud structure. Ti-MCM-41 was transformed into TS-l/MCM-41 by using the dry gel conversion process. For the synthesis of Ti-MCM-41 with TS-1(TS-1/MCM-41) structure TPAOH was used as the template. The synthesized TS-l/MCM-41 has hexagonal mesopores when the DGC process was carried out for less than 3 6 h. The catalytic activity of synthesized TS-l/MCM-41 catalysts was measured by the epoxidation of 1-hexene and cyclohexene. For the comparison of the catalytic activity, TS-1 and Ti-MCM-41 samples were also applied to the epoxidation reaction under the same reaction conditions. Both the conversion of olefins and selectivity to epoxide over TS-l/MCM-41 are found hi er flian those of other catalysts. 

The proposed catalytic cycle, which is based on experimental data, is shown in Scheme 6. Loss of 2 equiv. of N2 from 5 (or alternatively 1 equiv. of N2 or 1 equiv. of H2 from complexes shown in Scheme 3) affords the active species a. Olefin coordination giving b is considered to be preferred over oxidative addition of H2. Then, oxidative addition of H2 to b provides the olefin dihydride intermediate c. Olefin insertion giving d and subsequent alkane reductive elimination yields the saturated product and regenerates the catalytically active species a. 

Stack and coworkers immobilized phenantrohne derivative 16 on micelle-templated silica SBA-15 (Scheme 8) [55,56]. The system showed more selective and efficient catalytic activity for olefin epoxidations with peracetic acid than the analogous homogeneous catalyst. 

The high catalytic activity also enabled aza-Claisen rearrangements to form Al-substituted quaternary stereocenters (Fig. 26) [71]. The catalyst does not need to distinguish between differently sized substituents on the double bond of 49 (e.g., R = CDa, R = CHs, ee = 96%), indicating that coordination of the olefin is the stereoselectivity predetermining step. The imidate-N-atom subsequently attacks intermediate 47-1 from the face remote to the Pd-center totally resulting in a... 

Ferrocen-l,l -diylbismetallacycles are conceptually attractive for the development of bimetal-catalyzed processes for one particular reason the distance between the reactive centers in a coordinated electrophile and a coordinated nucleophile is self-adjustable for specific tasks, because the activation energy for Cp ligand rotation is very low. In 2008, Peters and Jautze reported the application of the bis-palladacycle complex 56a to the enantioselective conjugate addition of a-cyanoacetates to enones (Fig. 31) [74—76] based on the idea that a soft bimetallic complex capable of simultaneously activating both Michael donor and acceptor would not only lead to superior catalytic activity, but also to an enhanced level of stereocontrol due to a highly organized transition state [77]. An a-cyanoacetate should be activated by enolization promoted by coordination of the nitrile moiety to one Pd(II)-center, while the enone should be activated as an electrophile by coordination of the olefinic double bond to the carbophilic Lewis acid [78],... 

Huang H, Peters R (2009) A highly strained planar chiral platinacycle for catalytic activation of internal olefins in the Eriedel-Crafts alkylation of indoles. Angew Chem Int Ed 48 604-606... 

The Mizoroki-Heck reaction is a metal catalysed transformation that involves the reaction of a non-functionalised olefin with an aryl or alkenyl group to yield a more substituted aUcene [11,12]. The reaction mechanism is described as a sequence of oxidative addition of the catalytic active species to an aryl halide, coordination of the alkene and migratory insertion, P-hydride elimination, and final reductive elimination of the hydride, facilitated by a base, to regenerate the active species and complete the catalytic cycle (Scheme 6.5). 

---