NONMETALS phosphorus

The halides and oxyhalides of some nonmetals hydrolyze (react with water) to produce two acids a (binary) hydrohalic acid and a (ternary) oxyacid of the nonmetal. Phosphorus trihalides react with water to produce the corresponding hydrohalic acids and phosphorous acid, a weak diprotic acid, whereas phosphorus pentahalides give phosphoric acid and the corresponding hydrohalic acid. 

The second example combines calcium metal and the nonmetal phosphorus. The compound name ends in ide therefore, this is also a binary salt, which have varying hazards. Calcium phosphide, however, is one of the exceptions. Phosphides are one of the salts that have a known hazard they give off phosphine gas and form calcium hydroxide liquid, which is a corrosive base. Even so, this is just a preliminary estimate. All materials should still be researched for additional hazards. Phosphine is a dangerous fire risk and highly toxic by inhalation. 

Chlorine Ammonia, acetylene, alcohols, alkanes, benzene, butadiene, carbon disulflde, dibutyl phthalate, ethers, fluorine, glycerol, hydrocarbons, hydrogen, sodium carbide, flnely divided metals, metal acetylides and carbides, nitrogen compounds, nonmetals, nonmetal hydrides, phosphorus compounds, polychlorobi-phenyl, silicones, steel, sulfldes, synthetic rubber, turpentine... 

Chlorine dioxide Ammonia, carbon monoxide, hydrogen, hydrogen sulflde, methane, mercury, nonmetals, phosphine, phosphorus pentachloride... 

Lead dioxide Aluminum carbide, hydrogen peroxide, hydrogen sulfide, hydroxylamine, ni-troalkanes, nitrogen compounds, nonmetal halides, peroxoformic acid, phosphorus, phosphorus trichloride, potassium, sulfur, sulfur dioxide, sulfides, tungsten, zirconium... 

Arsenic and selenium, which fall directly below phosphorus and sulfur in the periodic table, are of interest for a variety of reasons. Arsenic is a true metalloid. A metallic form, called gray arsenic, has an electrical conductivity approaching that of lead. Another allotrope, yellow arsenic, is distinctly nonmetallic it has the molecular formula As4, analogous to white phosphorus, P4. Selenium is properly classified as a nonmetal, although one of its allotropes has a somewhat metallic appearance and is a semiconductor. Another form of selenium has the molecular formula Se8. analogous to sulfur. 

The octet rule accounts for the valences of many of the elements and the structures of many compounds. Carbon, nitrogen, oxygen, and fluorine obey the octet rule rigorously, provided there are enough electrons to go around. However, some compounds have an odd number of electrons. In addition, an atom of phosphorus, sulfur, chlorine, or another nonmetal in Period 3 and subsequent periods can accommodate more than eight electrons in its valence shell. The following two sections show how to recognize exceptions to the octet rule. 

Why Do We Need to Know This Material The elements in the last four groups of the periodic table illustrate the rich variety of the properties of the nonmetals and many of the principles of chemistry. These elements include some that are vital to life, such as the nitrogen of proteins, the oxygen of the air, and the phosphorus of our bones, and so a familiarity with their properties helps us to understand living systems. Many of these elements are also central to the materials that provide the backbone of emerging technologies such as the nanosciences, superconductivity, and computer displays. 

The term metallo-organic is used somewhat loosely in CVD parlance, since it includes compounds of elements, such as silicon, phosphorus, arsenic, selenium, and tellurium, that are not considered metallic. To conform to what appears to be a well-established tradition, such nonmetal compounds will be included here as metallo-organics. 

This review concerns in the first part the works published during the last three years on the synthesis and reactivity of stabilized ylides C-substituted by electron-withdrawing groups (COR, CO2R, CN, etc.). The second part deals with the works published in the same period on the chemistry of phosphorus ylides mainly C-substituted by heteroatoms of groups 1-16 (metals, metalloids and nonmetal elements Li, Ba, Ca, Ti, Zr, Nb, Mo, Re, Fe, Ru, Rh, Pd, Pt, Au, Zn, Hg, B, Si, Sn, N, P, As, Sb, O, S, Te). 

Nitrogen is a colorless diatomic gas. Phosphorus has several elemental forms, but the most common is a red solid that is used for match tips. Arsenic and antimony are gray solids, and bismuth is a silvery solid. Classify these elements of Group 15 as metals, nonmetals, or metalloids. 

The iron formed in a blast furnace, called pig iron, contains impurities that make the metal brittle. These include phosphorus and silicon from silicate and phosphate minerals that contaminated the original ore, as well as carbon and sulfur from the coke. This iron is refined in a converter furnace. Here, a stream of O2 gas blows through molten impure iron. Oxygen reacts with the nonmetal impurities, converting them to oxides. As in the blast furnace, CaO is added to convert Si02 into liquid calcium silicate, in which the other oxides dissolve. The molten iron is analyzed at intervals until its impurities have been reduced to satisfactory levels. Then the liquid metal, now in the form called steel, is poured from the converter and allowed to solidify. 

Nonmetals carbon, nitrogen, oxygen, silicon, phosphorus, sulfur, chlorine, bromine, and iodine... 

Although the products in these equations are written as if they were simple ionic binary compounds, this is not always the case. For example, some nonmetals form clusters containing several atoms arranged in polyhedral structures. One such species is the P73- cluster, which has six phosphorus atoms at the vertices of a trigonal prism with the seventh occupying a position above a triangular face... 

Neodymium Nickel Phosphorus Aluminum, aluminum(III) chloride, ethylene, 1,4-dioxan, hydrogen, methanol, nonmetals, oxidants, sulfur compounds... 

Nitropropane Nitrosyl fluoride Nitrosyl perchlorate Nitrourea Nitrous acid Nitryl chloride Oxalic acid See under Nitromethane chlorosulfonic acid, oleum Haloalkenes, metals, nonmetals Acetones, amines, diethyl ether, metal salts, organic materials Mercury(II) and silver salts Phosphine, phosphorus trichloride, silver nitrate, semicarbazone Ammonia, sulfur trioxide, tin(IV) bromide and iodide Furfuryl alcohol, silver, mercury, sodium chlorate, sodium chlorite, sodium hypochlorite... 

Both P and Cl are nonmetals. This is a binary molecular compound phosphorus trichloride. 

By far the most important redox reaction relative to chemical stability is the reaction between an oxidizable material and oxygen from air. The particle size and any droplets have a large effect on the combustion properties. Some substances react so rapidly in air that ignition occurs spontaneously. These so called pyrophoric compounds (white phosphorus, alkali metals, metal hydrides, some metal catalysts, and fully alkylated metals and nonmetals) must be stored in the absence of air. 

Many important soil components are not present as simple cations or anions but as oxyanions that include both important metals and nonmetals. The most common and important metal oxyanion is molybdate (Mo042 ). The most common and important nonmetal oxyanions are those of carbon (e.g., bicarbonate [HC03 ] and carbonate [C032-]), nitrogen (e.g., nitrate [N03 ] and nitrite [NQ2 ]), and phosphorus (e.g., monobasic phosphate [H2P04 ], dibasic... 

Of the nonmetal oxyanions, those of carbon have a different role in soil than nitrogen and phosphorus. Bicarbonate and carbonate can act as counterions to cations to keep the soil electrically neutral. They are also important because all pH changes in soil tend to involve either carbonate or bicarbonate, and thus, both are involved in soil pH and buffering. 

Nonmetal hydrides Boron trifluoride, phosphorus trichloride, silicon tetrachloride... 

Nonmetal oxides Phosphorus pentoxide, sulfur trioxide... 

Germanium has a gray shine with a metallic silvery-white luster. It is a brittle element classed as a semimetal or metalloid, meaning it is neither a metal such as iron or copper nor a nonmetal, such as phosphorus, sulfur, or oxygen. Germanium has some properties like a metal and some like a nonmetal. It is a crystal in its pure state, somewhat like silicon. It will combine with oxygen to form germanium dioxide, which is similar to sihcon dioxide (sand). 

Although phosphorus is in group 15 with some other metalloids, it is usually classed as a nonmetal since it resembles nitrogen somewhat, the element above it in group 15. Both are essential to the biochemical field as vital elements to support life. Phosphorus has 10 known allotropic forms. This is an unusually high number for any element. A system of categorizing the allotropes by three colors has made it easier to keep track of them. These three colors are white, red, and black phosphorus. 

The elements essential for life can be divided into macroelements (daily requirement > 100 mg) and microelements (daily requirement < 100 mg). The macroelements include the electrolytes sodium (Na), potassium (K), calcium (Ca), and magnesium (Mg), and the nonmetals chlorine (Cl), phosphorus (P), sulfur (S), and iodine (I). 

---