Microspheres material

Sputtered electrode material Gold Microsphere material Polybead carboxylate microspheres... 

Uranium and mixed uranium—plutonium nitrides have a potential use as nuclear fuels for lead cooled fast reactors (136—139). Reactors of this type have been proposed for use ia deep-sea research vehicles (136). However, similar to the oxides, ia order for these materials to be useful as fuels, the nitrides must have an appropriate size and shape, ie, spheres. Microspheres of uranium nitrides have been fabricated by internal gelation and carbothermic reduction (140,141). Another use for uranium nitrides is as a catalyst for the cracking of NH at 550°C, which results ia high yields of H2 (142). 

Truly porous, synthetic ion exchangers are also available. These materials retain their porosity even after removal of the solvent and have measurable surface areas and pore size. The term macroreticular is commonly used for resins prepared from a phase separation technique, where the polymer matrix is prepared with the addition of a hq-uid that is a good solvent for the monomers, but in which the polymer is insoluble. Matrices prepared in this way usually have the appearance of a conglomerate of gel-type microspheres held together to... 

Microspherical polymer beads are widely used as packing materials for chromatography and a variety of other applications. Size exclusion chromatography is based on pore size and pore-size distribution of microbeads to separate... 

The third line of development was to increase the selectivity in order to achieve the highest possible resolution to address difficult separations. This may be achieved by a very narrow pore size distribution of the media, e.g., such as achieved by porous silica microspheres (PSM) or by modifying the porous phase by a composite material, e.g., as for Superdex. In practice, this material shows a maximum selectivity over the separation range (e.g., see Fig. 2.2). 

Adding large quantities of pozzolan, ceramic microspheres or nitrogen. These materials lighten the slurry because they have lower specific gravities than the cement. 

Syntactic foam contains an orderly arrangement of hollow sphere fillers. They are usually glass microspheres approximately 100 microns (4 mils) in diameter, provide strong, impervious supports for otherwise weak, irregular voids. As a result, syntactic foam has attracted considerable attention both as a convenient and relatively lightweight buoyancy material and as a porous solid with excellent shock attenuating characteristics. The latter characteristic is achieved... 

A solid emulsion is a suspension of a liquid or solid phase in a solid. For example, opals are solid emulsions formed when partly hydrated silica fills the interstices between close-packed microspheres of silica aggregates. Gelatin desserts are a type of solid emulsion called a gel, which is soft but holds its shape. Photographic emulsions are gels that also contain solid colloidal particles of light-sensitive materials such as silver bromide. Many liquid crystalline arrays can be considered colloids. Cell membranes form a two-dimensional colloidal structure (Fig. 8.44). 

The ability of chitosan hydrochloride to enhance the transcorneal permeability of the drug has been demonstrated [289]. Polyethylene oxide (PEO) was used as a base material to which ofloxacin-containing chitosan microspheres prepared by spray-drying were added and powder compressed resulting in circular inserts (6 mm). 

Figure 2. Irradiation of uranyl glass microspheres (A) and FITC-labeled microbeads (B) demonstrate photobleaching and stability of both materials.

The approach to standardization used by Haaijman (53) and others (66,67), in which the fluorophor is incorporated within or bound to the surface of a plastic sphere, is more versatile than the use of inorganic ion>doped spheres, since the standard can be tailored exactly to the specifications required by the analyte species. However, this approach increases the uncertainty of the measurement because the photobleaching characteristics of both the standard and the sample must be considered. The ideal approach is to employ both types of standards. The glass microspheres can be used to calibrate instruments and set instrument operating parameters on a day-to-day basis, and the fluorophor-doped polymer materials can be used to determine the concentration-instrument response function. 

PEG/PBT copolymers are also very good matrix materials for the release of growth factors in tissue engineering. Proteins have been delivered from PEG/PBT microspheres with preservation of protein delivery of complete activity. In the case of protein delivery from PLGA and poly(ortho ester) microspheres, the protein activity was significantly reduced. " ... 

It appears that none of these process techniques is dominant, at least with the lactide/glycolide materials. Researchers have considerable choices available in regard to fabrication of microspheres from these polymers. The most commonly used procedures employ relatively mild conditions of pH and temperature and are usually quite compatible with the bioactive agents to be entrapped, including proteins and other macromolecules. Only in the case of live virus and living cell encapsulation have serious deactivation problems been encountered and those problems were due to solvents used in the process. 

A unique method of formulating delivery systems based on starch/ PLA systems was studied (138). In that approach, the goal was to provide a better matrix for delivery of high molecular weight hydrophilic molecules. A hydrophilic material, starch, was combined through graft polymerization to PLA. The carbolactic polymers were then used to entrap bovine serum albumin in microspheres. 

Gelatin has been used as a coating material to microencapsulate drugs and as a matrix, usually in the form of microspheres. The... 

DL Wilcox, M Berg, T Bemat, D Kellerman, JK Cochran, eds. Hollow and Solid Spheres and Microspheres Science and Technology Associated with Their Eabrication and Application. Vol 372. Pitsburgh Materials Research Society Proceedings, 1995. 

Materials formed by acid-base reactions between calcium aluminate compounds and phosphate-containing solutions yield high-strength, low-permeability, C02-resistant cements when cured in hydrothermal environments. The addition of hollow aluminosilicate microspheres to the uncured matrix constituents yields slurries with densities as low as approximately 1200 kg/m, which cure to produce materials with properties meeting the criteria for well cementing. These formulations also exhibit low rates of carbona-tion. The cementing formulations are pumpable at temperatures up to 150° C. 

Materials. Microspherical PGG glucan (Adjuvax, Alpha-Beta Technology, Worcester, MA) was prepared from Saccharomyces cereviseae strain R4 cells (11). Zymosan, cytochrome c (cyt c), bovine serum albumin (BSA), yeast alcohol dehydrogenase (ADH), Complete Freunds Adjuvant (CFA) and Incomplete Freunds Adjuvant (IFA) were purchased from Sigma Chemical Co. (St. Louis, MO). 

Wang, Y., Angelatos, A.S. and Caruso, F. (2008) Chemistry of Materials, 20,848-858. Sukhorukov, G.B. (2002) (eds R. Arshady, and A. Guyot), Microspheres, Microcapsules and Liposomes, Vol. 5 Dendrimers, Assemblies and Nanocomposites, Citus Books, London, Author are the amended details correct ... 

The tacky polymeric microspheres that comprise the pressure-sensitive adhesive layers of repositionable notes are patented inventions. One such material (U.S. Patent 5,714,237) is prepared by a free-radical polymerization reaction of isooctyl acrylate (Fig. 14.3.1) in the presence of polyacrylic acid with a chain-... 

---