Microscopic techniques microscopy

Considering existing microscopical techniques, one can find that non-destmctive information from the internal stmcture of an object in natural conditions can be obtained by transmission X-ray microscopy. Combination of X-ray transmission technique with tomographical reconstmction allows getting three-dimensional information about the internal microstmcture [1-3]. In this case any internal area can be reconstmcted as a set of flat cross sections which can be used to analyze the two- and three-dimensional morphological parameters [4]. For X-ray methods the contrast in the images is a mixed combination of density and compositional information. In some cases the compositional information can be separated from the density information [5]. Recently there has been a... 

Optical Techniques. The most important tool in a museum laboratory is the low power stereomicroscope. This instmment, usually used at magnifications of 3—50 x, has enough depth of field to be useful for the study of surface phenomena on many types of objects without the need for removal and preparation of a sample. The information thus obtained can relate to toohnarks and manufacturing techniques, wear patterns, the stmcture of corrosion, artificial patination techniques, the stmcture of paint layers, or previous restorations. Any art object coming into a museum laboratory is examined by this microscope (see Microscopy Surface and interface analysis). 

Microscopic techniques are extensively used to study the surface morphology of reinforcing fibers. The characterization of microstructure of polymer fibers provides an insight into stmcture-property relationship of the fiber. Microscopy techniques have been employed for the... 

An unusually extensive battery of experimental techniques was brought to bear on these comparisons of enantiomers with their racemic mixtures and of diastereomers with each other. A very sensitive Langmuir trough was constructed for the project, with temperature control from 15 to 40°C. In addition to the familiar force/area isotherms, which were used to compare all systems, measurements of surface potentials, surface shear viscosities, and dynamic suface tensions (for hysteresis only) were made on several systems with specially designed apparatus. Several microscopic techniques, epi-fluorescence optical microscopy, scanning tunneling microscopy, and electron microscopy, were applied to films of stearoylserine methyl ester, the most extensively investigated surfactant. 

Burrells W. Microscope Technique. A Comprehensive Handbookfor General and Applied Microscopy, A Halsted Press Book, Wiley, New York, 1977. 

Williams PM, Cheema MS, Davies MC, Jackson DE, Tedler SJB. Methods in Molecular Biology, Vol. 22, Microscopy, Optical Spectroscopy and Microscopic Techniques (Jones C, Mulloy B, Thomas AH, eds.), Humana Press, Totowa, NJ,... 

Microscopic techniques, 70 428 Microscopists, role of, 76 467 Microscopy, 76 464-509, See also Atomic force microscopy (AFM) Electron microscopy Light microscopy Microscopes Scanning electron microscopy (SEM) Transmission electron microscopy (TEM) acronyms related to, 76 506-507 atomic force, 76 499-501 atom probe, 76 503 cathodoluminescence, 76 484 confocal, 76 483-484 electron, 76 487-495 in examining trace evidence, 72 99 field emission, 76 503 field ion, 76 503 fluorescence, 76 483 near-held scanning optical,... 

Improvements in the resolution and versatility of microscopic techniques have come about rapidly. TEM, STEM, and high-resolution electron microscopy have helped the catalytic chemist to analyze the effects of metal-support interactions and particle-size effects—developments that will probably lead to improvements in commercial technologies. Several novel analytical methods, arising from very clever experimentation, were discussed at the... 

Other more advanced microscopic techniques have been developed, including near-held scanning optical microscopy [166] and scanning probe microscopy techniques, such as atomic force microscopy and scanning tunnelling microscopy [166, 167],... 

Confocal microscopy (CM) is another microscope technique for apparent optical sectioning, achieved by exclusion of out-of-focus emitted light with a set of image plane pinholes. CM has the clear advantage in versatility its method of optical sectioning works at any plane of the sample, not just at an interface between substances having dissimilar refractive indices. However, other differences exist which, in some special applications, can favor the use of TIRF ... 

Confocal laser scanning microscopy (CLSM) in conjunction with specific staining techniques is best suited to elucidate intracellular trafficking and localization. CLSM is a specific epifluorescence microscopical technique capable of optical cross-sectioning with a spatial resolution of 1 /urn and below [41, 42],... 

Mieroscopic visualization techniques have also been used to investigate mucus-polymer interactions [36-39]. Transmission electron microscopy was used by Fiebrig et al. [36], whereas different microscopical techniques were used by Lehr et al. [37] for the visualization of mucoadhesive interfaces. Transmission electron microscopy in combination with near-fleld Fourier transform infrared microscopy (FT-IR) has been shown to be suitable for investigating the adhesion-promoting effect of polyethyleneglycol added in a hydrogel [38]. Moreover, scanning force microscopy may be a valuable approaeh to obtain information on mueoadhesion and specific adhesion phenomena [39]. 

In addition to surface analytical techniques, microscopy, such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning tunneling microscopy (STM) and atomic force microscopy (AFM), also provide invaluable information regarding the surface morphology, physico-chemical interaction at the fiber-matrix interface region, surface depth profile and concentration of elements. It is beyond the scope of this book to present details of all these microscopic techniques. 

Transmission electron microscopy (TEM) can provide valuable information on particle size, shape, and structure, as well as on the presence of different types of colloidal structures within the dispersion. As a complication, however, all electron microscopic techniques applicable for solid lipid nanoparticles require more or less sophisticated specimen preparation procedures that may lead to artifacts. Considerable experience is often necessary to distinguish these artifacts from real structures and to decide whether the structures observed are representative of the sample. Moreover, most TEM techniques can give only a two-dimensional projection of the three-dimensional objects under investigation. Because it may be difficult to conclude the shape of the original object from electron micrographs, additional information derived from complementary characterization methods is often very helpful for the interpretation of electron microscopic data. 

When the first edition was published in 1992, the resolution of the acoustic microscope techniques used at the time was controlled by the wavelength. In practice the frequency-dependent attenuation of the acoustic wave in the coupling fluid sets a lower limit to the wavelength, and therefore to the resolution, of about 1 pm for routine applications. Since then scanning probe techniques with nanometre scale resolution have been developed along the lines of the atomic force microscope. This has resulted in the development of the ultrasonic force microscopy techniques, in which the sample is excited by... 

We shall first examine the microscopic techniques which allowed us to study these transformations and to show the striking analogy between the images obtained by optical microscopy in polarized light and by electron microscopy with ultrathin sections, despite the difference of the absorption mechanisms of light and electrons. Once this analogy was established, we sought to use electron microscopy and electron microdiffraction to learn more about the texture and structure of the anisotropic areas. 

Aerosol Heterogeneity. The variation of the chemical composition from particle to particle within an aerosol size class has been probed in a number of ways. Single-particle chemical analysis has been achieved by using the laser Raman microprobe (25) and analytical scanning electron microscopy (26). With the electron microscope techniques, the particle can be sized as well as analyzed chemically, so the need for classification prior to sample collection is reduced. Analyzing hundreds to thousands of particles provides the information necessary to track the particles back to their different sources but is extremely time consuming. 

In this Chapter we will concentrate on the methods of food microscopy rather than the details of results of individual investigations. The reader is referred to Holcomb and Kalab [17], Holcomb [18], and Kalab [19], for an introduction to the details of the microscopical literature of Food Science. We begin with a discussion of some of the more common microscopical techniques in use in Food Science, especially their more uncommon applications. These are rarely published and they are usually confined to industrial applications. Included is a section on quantitative light microscopy. Finally we deal with some of the newer technologies which have yet to be applied widely to food. 

In research on the mechanisms gouverning the modification reactions, the thin silica layers allow the application of various surface analytical techniques, which are of no use for analysis inside porous systems. Reaction mechanisms are simplified by the elimination of porosity and may be studied by direct surface techniques such as ellipsometry, as well as microscopic techniques such as Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM).59... 

---