Methyl trimethacrylate

Fatty acid esters Ethyl acetate, methyl methacrylate, trimethylolpropane trimethacrylate, decyl methacrylate, 2-hydroxyethyl methacrylate, ethoxy ethyl acetate, methyl palmitate, ethyl palmitate, isopropyl palmitate, butyl palmitate, isobutyl palmitate, methyl margarate, butyl margarate, methyl stearate, ethyl stearate, butyl stearate, isobutyl stearate, methyl oleate, bis(2-ethylhexyl) adipate, bis(2-ethylhexyl) sebacate, methyl linoleate, methyl laurate, octyl laurate, methyl myristate, isobutyl myristate, butyl myristate, dihydroisopimaric add methyl ester... 

METHACRYLIC SYSTEM. Methyl methacrylate purchased from Merck and 1,1,1-trimethylol propane trimethacrylate (TRIM) supplied by Degussa, used as crosslinker, were dried over molecular sieves but not otherwise purified, so that they still contained 15 ppm and 100 ppm methylethylhydroquinone, respectively. The initiator of radical polymerization was azobisisobutyronitrile (AIBN). 

The most common acrylic polymer is polymethyl methacrylate, which is obtained by polymerization of methyl methacrylate (MMA). The material consists of a highway-grade aggregate and a matrix produced by cross-linking MMA with trimethylol propane trimethacrylate or other polyfunctional acrylic oligomers. 

Monomer. St, styrene MMA, methyl methacrylate AN, acrylonitrile NIPAAm, /V-isopropylacrylamide MAA, methacryhc acid NDEAMA, 2-diethylaminoethyl methacrylate MBAA, MW -methylene bisa-crylamide TRIM, trimethylolpropane trimethacrylate ODVE, octadecylvinyl ether ODA, octadecyl acrylate DMAAm, iV,iV-dimethylacrylamide PyMMA, 1-pyrenylmethyl methacrylate AnMMA, 9-an-thracenylmethyl methacrylate HDT, 1,6-hexane dithiol TEGDVE, triethyleneglycol divinyl ether HEMA, hydroxyethyl methacrylate AAm, acrylamide PEG-DA, poly(ethylene glycol) diacrylate PEG-TA, poly(ethylene glycol) tetraacrylate. 

Trimethytoipropane triacryiate Tris (2-hydroxyethyl) isocyanurate triacryiate Tris (2-hydroxyethyi) isocyanurate trimethacrylate Tyzor AA Tyzor DC Tyzor LA Tyzor TBT Tyzor TE Tyzor TOT Tyzor TPT Urea-formaldehyde resin, methylated. Zinc ammonium carbonate... 

Figure 11.12. Compressive stress-strain curves for concrete impregnated with various combinations of methyl methacrylate (MMA), n-butyl acrylate (BA), and a crosslinking agent, trimethylolpropane trimethacrylate (TMPTMA). Specimen BI, 90 MMA/10 TMPTMA ...

Trimethylolpropane trimethacrylate. See 1,1,1-Trimethylolpropane trimethacrylate 1,1,1 -Tri methyl ol propane tri methacrylate CAS 3290-92-4 EINECS/ELINCS 221-950-4 Synonyms 2-Ethyl-2-hydroxymethyl-1,3-propanediol trimethacrylate 1,3-Propanediol, 2-ethyl-2-hydroxymethyl-, trimethacrylate TMPTMA TRIM Trimethylolpropane trimethacrylate... 

Trimethylolpropanetrimethancrylate. See 1,1,1-Trimethylolpropane trimethacrylate Trimethylolpropane trioctanoate CAS 4826-87-3 EINECS/ELINCS 225-404-6 Synonyms 2-Ethyl-2-[[(oxo-2-ethylhexyl) oxy] methyl]-1,3-propanediyl 2-ethylhexanoate 2-Ethyl-2-(((1-oxooctyl) oxy) methyl)-1,3-propanediyl dioctanoate Octanoic acid, 2-ethyl-2-(((1-oxooctyl) oxy) methyl)-1,3-propanediyl ester Octanoic acid, triester with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol Trimethylolpropane caprylate Trimethylolpropane tricaprylate Trimethylolpropane tri (2-ethylhexanoate) Definition Triester of trimethylolpropane and 2-ethylhexanoic acid Empiricai CsoHseOs Properties Colorless liq. m.w. 512.78 Uses Emollient, lubricant in cosmetics Trade Name Synonyms Nikkol Trialan 308 [Nikko Chems. Co. Ltd http //www.nikkoi.co.jp/index.htmi] Trimethylolpropane trioleate CAS 57675-44-2... 

Methyl methacrylate Ethyl methacrylate Ethyl acrylate 2-Hydroxyethyl acrylate Butyl methacrylate Isobutyl methacrylate Methacrylic acid Tetrahydrofurfuryl methacrylate Ethylene glycol dimethacrylate Diethylene glycol dimethacrylate Triethylene glycol dimethacrylate Trimethylol propane trimethacrylate Urethane methacrylate Tripropylene glycol acrylate... 

Materials, The raw materials used are described in Table 5.5. Poly(caprolactone) glycol with average molecular weight of 1978 (Niax D560), 1,4-butanediol (1,4-BD), and trimethylolpropane (TMP) were dried at 60 C for 5 hr under a vacuum of 2 mm. Methyl methacrylate (MMA) was washed with 5% aqueous potassium hydroxide solution, followed by washing with distilled water, dried over Linde 4A molecular sieves, and distilled at 40°C under a vacuum of 2 mm to remove the stabilizer. Trimethylolpropane trimethacrylate (TMPTMA) was also distilled at 40 C under 2 mm vacuum. 4,4 -Diphenylmethane diisocyanate (MDI) and benzoyl peroxide were used without further purification. 

Tris(2-methyl-2-propenoyl)-2-ethyl-2-hydroxym ethyl-1,3-propanediol 1,1,1-Trimethylolpropane trimethacrylate C48H26O6 3290-92-4 338.395 1.470"" ... 

Parallel approaches have been described for the preparation of polyacrylate-protease conjugates [396-400]. Acryloylation of subtilisin and a-chymotrypsin, followed by mixed polymerization with methyl methacrylate, vinyl acetate, styrene, or ethylvinyl ether, provides insoluble, doped polymethyl methacrylate, polyvinyl acetate, polystyrene, and polyethyl vinyl ether polymers [396]. These biocatalytic plastics perform especially well in hydrophilic and hydrophobic solvents, and have been used for peptide synthesis and the regioselective acylation of sugars and nucleosides. Similarly, modification of subtilisin and thermolysin with PEG monomethacrylate, then copolymerization with methyl methacrylate and trimethylolpropane trimethacrylate furnishes protease-polymethyl methacrylate plastics, which show good activities and stabilities in aqueous, mixed, and low-water and anhydrous organic media [397-400]. The protein-acrylate composites are unique in that they enable catalytic densities as high as 50% w/w. 

---