Methyl methacrylate Vinyls

A number of methods such as ultrasonics (137), radiation (138), and chemical techniques (139—141), including the use of polymer radicals, polymer ions, and organometaUic initiators, have been used to prepare acrylonitrile block copolymers (142). Block comonomers include styrene, methyl acrylate, methyl methacrylate, vinyl chloride, vinyl acetate, 4-vinylpyridine, acryUc acid, and -butyl isocyanate. 

Pure polymeric acrylonitrile is not an interesting fiber and it is virtually undyeable. In order to make fibers of commercial iaterest acrylonitrile is copolymerized with other monomers such as methacrylic acid, methyl methacrylate, vinyl compounds, etc, to improve mechanical, stmctural, and dyeing properties. Eibers based on at least 85% of acrylonitrile monomer are termed acryHc fibers those containing between 35—85% acrylonitrile monomer, modacryhc fibers. The two types are in general dyed the same, although the type and number of dye sites generated by the fiber manufacturing process have an influence (see Eibers, acrylic). 

For almost all applications unsaturated polyesters are dissolved in an unsaturated monomer capable of free-radical polymerization with the unsaturations in polyester chains. This polymerizable comonomer is generally styrene, but other compounds, such as methyl methacrylate, vinyl toluene, a-methylstyrene, and diallylphthalate, are also used in some applications. Upon heating and in... 

Uses Copolymerized with methyl acrylate, methyl methacrylate, vinyl acetate, vinyl chloride, or 1,1-dichloroethylene to produce acrylic and modacrylic fibers and high-strength fibers ABS (acrylonitrile-butadiene-styrene) and acrylonitrile-styrene copolymers nitrile rubber cyano-ethylation of cotton synthetic soil block (acrylonitrile polymerized in wood pulp) manufacture of adhesives organic synthesis grain fumigant pesticide monomer for a semi-conductive polymer that can be used similar to inorganic oxide catalysts in dehydrogenation of tert-butyl alcohol to isobutylene and water pharmaceuticals antioxidants dyes and surfactants. 

Poly(methyl methacrylate) Vinyl chloride Acrylonitrile Ethylene Acrylic add Methylacrylate Acrylonitrile Styrene Butylene dimethacrylate Acrylic add... 

A report on the change in molecular orientation after grafting is presented by Hayakawa et al. (28), through the angular distribution of polarization of fluorescence on Nylon films grafted with methyl methacrylate, vinyl acetate, and vinyl pyrrolidone, respectively, in liquid phase. 

In order to make libers of commercial interest acrylonitrile is eopolymer-ized with other monomers such as inethacrylic acid, methyl methacrylate, vinyl compounds, etc., to improve mechanical, structural, and dyeing properties. Fibers based on at least 85% of acrylonitrile monomer are termed... 

This group covers polymeric peroxides of indeterminate structure rather than polyfunctional macromolecules of known structure. These usually arise from autoxidation of susceptible monomers and are of very limited stability or explosive. Polymeric peroxide species described as hazardous include those derived from butadiene (highly explosive) isoprene, dimethylbutadiene (both strongly explosive) 1,5-p-menthadiene, 1,3-cyclohexadiene (both explode at 110°C) methyl methacrylate, vinyl acetate, styrene (all explode above 40°C) diethyl ether (extremely explosive even below 100°C ) and 1,1-diphenylethylene, cyclo-pentadiene (both explode on heating). 

Other trialkyltin-containing monomers such as 3-tributyltinstyrene (84), tributyltin methacrylate (85) and 4-[bis(trimethylstannyl)methyl]styrene (86) were also reported to homo- and copolymerise with styrene under radical conditions175-177. In addition, 3-tributyltinstyrene (84) was copolymerised under radical conditions with ethyl acrylate, methyl methacrylate, vinyl acetate and acrylonitrile175. A functional methacrylate-based polymer was prepared by the copolymerization of the triorganotin methacrylate monomer 87 with styrene and divinylbenzene178,179. 

Vinyl monomers, such as styrene, methyl methacrylate, vinyl acetate, vinyl chloride or acrylonitrile are preferably polymerized by chain polymerization techniques initiated by free radicals. Suitable free radicals can be handily achieved from unstable chemicals like peroxides (benzoyl peroxide, dicumil peroxide) or di-azo reagents (e.g. 2,2 -azo-bis-isobutyronitrile, AIBN) which are dissolved in monomer and usually thermally decompose at temperature range of 40-120 °C. Alternatively, suitable radicals for polymerization can also be activated without addition of external initiators, by just applying ultraviolet light (wave length 200-350 nm) or ultrasound (15,33,34) onto monomer. 

Fig. 22a-h. Glass transition temperature versus composition of copolymers methyl methacrylate + styrene (a) styrene + methyl acrylate (b) acrylonitrile + styrene (c) vinyl chloride + methyl acrylate (d) methyl methacrylate + vinyl chloride (e) acrylonitrile + butadiene (f) acrylonitrile + vinyl acetate (g) a-methyl styrene + acrylonitrile (h). Experimental points obtained at low conversions from various publications, are compared to the theoretical plots calculated according to Eqs. (7.1) within the framework of the terminal model [18]... 

Although theoretical models seem to be quite adequate for styrene emulsion polymerization in either batch reactors or CSTR s, such is not the case with other monomers like vinyl acetate, methyl acrylate, methyl methacrylate, vinyl chloride, etc. One of the early papers to discuss scane of the important mechanisms involved with these other moncaners was written by Priest ( ). He studied the emulsion polymerization of vinyl acetate and identified most of the key mechanisms involved. Priest s paper has been largely overlooked, however, perhaps because of the success of the Smith-Ewart approach to styrene. 

Polymer type methyl methacrylate/vinyl-acrylic Solids (%) 45 pH 3.5... 

Symmetric SBS block copolymers covering a wide range of compositions and molecular weights have been synthetized and studied by the same techniques as symmetric BSB copolymers In solution in methylethyl ketone, methyl methacrylate, vinyl acetate, or styrene they exhibit a behaviour similar to that of SB and BSB copolymers with respect to the effect of temperature, concentration, and postpolymerization of the solvent. The effect of the molecular weight of the soluble and insoluble blocks on the geometrical parameters of the hex onal and lamellar structures is however different for BSB and SBS copolymers. For SBS copolynKrs, there is a reciprocal interaction between soluble and insoluble blocks. 

Methyl methacrylate Vinyl acetate Butyl acrylate... 

Table 111 gives the results of this lilting for styrene, methyl acrylate, methyl methacrylate, vinyl acetate, vinyl chloride, and ethylene. Only the styrene data agree with the simple theory. 

Free radical polymerization of neat monomer in the absence of solvent and with only initiator present is called bulk or mass polymerization. Monomer in the liquid or vapor state is well mixed with initiator in a heated or cooled reactor as appropriate. The advantages of this method are that it is simple, and because of the few interacting components present, there is less possibility for contamination. However, vinyl-type polymerizations are highly exothermic so that control of the temperature of bulk polymerization may be difficult. Also, in the absence of a solvent viscosities may become very high toward the end of a polymerization, which could make stirring difficult, and add to the difficulty of heat removal from the system. The advantages of this system, however, are sufficiently attractive for this to be used commercially for the free radical polymerization of styrene, methyl methacrylate, vinyl chloride, and also for some of the polymerization processes of ethylene [7]. 

The minimum requirements for a dispersion polymerization are monomer, solvent/nonsolvent, initiator, and steric stabilizer. The monomer must be soluble in the reaction mixture and its polymer, insoluble. The monomers used in systems of commercial interest are methyl methacrylate, vinyl chloride, vinyli-dene chloride, vinyl esters, hydroxyl alkyl acrylates. A typical recipe for dispersion polymerization is shown in Table 9. 

---