Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Metals internal protective coatings

In internal protection, attention must be paid to the fact that mixed gases that contain hydrogen and oxygen are evolved by the protection current. Noble metals and noble metal coatings can catalyze an explosion. The safety measures required in this case are presented in DIN 50927 [32] (see also Section 20.1.5). [Pg.223]

The impressed current method with metal oxide-coated niobium anodes is usually employed for internal protection (see Section 7.2.3). In smaller tanks, galvanic anodes of zinc can also be used. Potential control should be provided to avoid unacceptably negative potentials. Pure zinc electrodes serve as monitoring and control electrodes in exposed areas which have to be anodically cleaned in the course of operation. Ag-AgCl electrodes are used to check these reference electrodes. [Pg.468]

Technical advantage/function Varnishes are used to protect coated materials (e.g. wood, metals) in internal and external applications. However, they also have an important aesthetic function and effect on the living enviromnent. [Pg.93]

The applicable codes and standards provide criteria for external inspections for such items as foundation and supports, anchor bolts, concrete or steel supports, guy wires, nozzles and sprinklers, pipe hangers, grounding connections, protective coatings and insulation, and external metal surfaces of piping and vessels, etc. These codes and standards also provide information on methodologies for internal inspection, and a frequency formula based on the corrosion rate of the materials of construction. Also, erosion both internal and external needs to be considered along with corrosion effects for piping and valves. Where... [Pg.280]

After 1860 in the United States, water mains were only occasionally given coatings of tar. About 18% the activities of Engii.sh undertakings were extended to America, where chiefly bare metal pipelines had previously been laid. Water supply pipes were coated internally with bitumen in America after 1912. Vical (1837) in France and J. Bull (1843) in America introduced the widely known cement mortar as a protective material for water pipes 16]. [Pg.6]


See other pages where Metals internal protective coatings is mentioned: [Pg.252]    [Pg.254]    [Pg.257]    [Pg.258]    [Pg.263]    [Pg.208]    [Pg.462]    [Pg.239]    [Pg.297]    [Pg.311]    [Pg.320]    [Pg.271]    [Pg.559]    [Pg.288]    [Pg.97]    [Pg.264]    [Pg.127]    [Pg.388]    [Pg.13]    [Pg.208]    [Pg.462]    [Pg.189]    [Pg.388]    [Pg.936]    [Pg.1105]    [Pg.347]    [Pg.35]    [Pg.214]    [Pg.268]    [Pg.363]    [Pg.279]    [Pg.11]    [Pg.100]    [Pg.349]    [Pg.295]    [Pg.514]    [Pg.1829]    [Pg.446]    [Pg.350]    [Pg.470]    [Pg.372]    [Pg.475]    [Pg.557]   
See also in sourсe #XX -- [ Pg.253 , Pg.256 ]




SEARCH



Coating metallizing

Coating protection

INTERNATIONAL PROTECTIVE

INTERNATIONAL PROTECTIVE COATINGS

Internal metallation

Internal protective coatings

Metal coatings

Metal protection

Metallic coatings metallizing

Protective coatings

Protective coatings metallizing

© 2024 chempedia.info