Protective coatings metallizing

Protective coat, Metal contact. Si3N4 Si02insulator ... 

Burchard, H. (1959). Klimabeanspruchung und Oberflachenschutz (Climatic requirements and protective coatings). Metall, 13, 526-536 (in German). 

The importance of polymer composites arises largely from the fact that such low density materials can have unusually high elastic modulus and tensile strength. Polymers have extensive applications in various fields of industry and agriculture. They are used as constructional materials or protective coatings. Exploitation of polymers is of special importance for products that may be exposed to the radiation or temperature, since the use of polymers make it possible to decrease the consumption of expensive (and, sometimes, deficient) metals and alloys, and to extent the lifetime of the whole product. 

The application of fundamentally new ECT (Russia patent Jf 2063025) has made it possible to provide high-efficiency defect control accompanied by detecting both small surface defects and more rough under-surface defects under non-magnetic metal layer of 7 mm thick, or surface defects under protection coatings, dye, corrosion, hermetic and other type of layer of 10 mm thick. 

Cadmium is a soft metal, which forms a protective coating in air, and burns only on strong heating to give the brown oxide CdO. It dissolves in acids with evolution of hydrogen ... 

Two basic methods are used for the appHcation of protective coatings to metal containers, ie, roUer coating and spraying. RoUer coating is used if physical contact is possible, eg, coating of metal in sheet and coil form. Spraying techniques are used if physical contact is not possible, eg, to coat the inside surface of two-piece drawn and ironed can bodies (see Coating processes). 

When the operating temperature exceeds ca 93°C, the catalytic effects of metals become an important factor in promoting oil oxidation. Inhibitors that reduce this catalytic effect usually react with the surfaces of the metals to form protective coatings (see Metal surface treatments). Typical metal deactivators are the zinc dithiophosphates which also decompose hydroperoxides at temperatures above 93°C. Other metal deactivators include triazole and thiodiazole derivatives. Some copper salts intentionally put into lubricants counteract or reduce the catalytic effect of metals. 

Cathodic Protection Systems. Metal anodes using either platinum [7440-06 ] metal or precious metal oxide coatings on titanium, niobium [7440-03-17, or tantalum [7440-25-7] substrates are extensively used for impressed current cathodic protection systems. A prime appHcation is the use of platinum-coated titanium anodes for protection of the hulls of marine vessels. The controUed feature of these systems has created an attractive alternative... 

Flame spray metallising is widely used for the protection of metal against corrosion, especially for in situ protection of stmctural members. The principal metal used for spraying of plastics is sine. Aluminum and copper are also used. If the distance from the part is too great, the zinc solidifies before it touches the part and adhesion is extremely poor. If the molten zinc oxidizes, conductivity and adhesion are poor. If the distance is too short, the zinc is too hot and the plastic warps or degrades. These coatings are not as dense as electrically deposited coatings because of numerous pores, oxide inclusions, and discontinuities where particles have incompletely coalesced. 

R. Manory and A. GriU, Protective Coatings of Metal Sufaces by Cold Plasma Treatments, NASA Technical Memorandum 87152, National Technical Information Service, Springfield, Va., 1985. 

Because of the high functional values that polyimides can provide, a small-scale custom synthesis by users or toU producers is often economically viable despite high cost, especially for aerospace and microelectronic appHcations. For the majority of iudustrial appHcations, the yellow color generally associated with polyimides is quite acceptable. However, transparency or low absorbance is an essential requirement iu some appHcations such as multilayer thermal iusulation blankets for satellites and protective coatings for solar cells and other space components (93). For iutedayer dielectric appHcations iu semiconductor devices, polyimides having low and controlled thermal expansion coefficients are required to match those of substrate materials such as metals, ceramics, and semiconductors usediu those devices (94). 

Aircraft Sealants. Polysulfides have been used for sealing fuel tanks and aircraft stmctural components since the 1940s. There are stringent requirements for these sealants. They must have outstanding resistance to fuels and exceUent adhesion to many different materials such as various metal aUoys and protective coatings used in aircraft constmction. The sealants must also perform in extremely variable weather conditions (10). The polysulfides have an exceUent performance record. 

---