Provenance metal

Schreck, P., Schubert, M., Freyer, M., Treuder, H. C., and Weiss, H. (2005). Multi-metal contaminated stream sediment in the Mansfeld mining district Metal provenance and source detection. Geochem.-Explor. Environ. Anal. 5, 51-57. 

Recent reviews (11-12) make it unnecessary to do more than draw attention to some salient points of lead isotope archaeology. For many years, comparative lead isotope studies of ancient metals and ores from the appropriate ore deposits have been in the forefront of metal provenance studies in archaeology (13-15). The earliest lead isotope studies by Brill (17-18) and... 

As LA-MC-ICP-MS becomes more accessible, provenance studies may begin to combine elemental and isotopic characterization. Some time ago, Stos-Gale [114] suggested that metal provenance studies could be based on combined lead isotope and trace element analyses, and the same kind of combined approach would seem desirable in the case of turquoise as well as other, seldom analyzed materials such as ceramic glazes. Cooper et al. [115] combined trace element and LA-MC-ICP-MS lead isotope analysis of native copper from North America, but found that the lead isotopes were of little use in source discrimination. 

First, the use of water limits the choice of Lewis-acid catalysts. The most active Lewis acids such as BFj, TiQ4 and AlClj react violently with water and cannot be used However, bivalent transition metal ions and trivalent lanthanide ions have proven to be active catalysts in aqueous solution for other organic reactions and are anticipated to be good candidates for the catalysis of aqueous Diels-Alder reactions. 

Trace-element analysis of metals can give indications of the geographic provenance of the material. Both emission spectroscopy (84) and activation analysis (85) have been used for this purpose. Another tool in provenance studies is the measurement of relative abundances of the lead isotopes (86,87). This technique is not restricted to metals, but can be used on any material that contains lead. Finally, for an object cast around a ceramic core, a sample of the core material can be used for thermoluminescence dating. 

Vapors emitted from the materials of closed storage and exhibit cases have been a frequent source of pollution problems. Oak wood, which in the past was often used for the constmction of such cases, emits a significant amount of organic acid vapors, including formic and acetic acids, which have caused corrosion of metal objects, as well as shell and mineral specimens in natural history collections. Plywood and particle board, especially those with a urea—formaldehyde adhesive, similarly often emit appreciable amounts of corrosive vapors. Sealing of these materials has proven to be not sufficiently rehable to prevent the problem, and generally thek use for these purposes is not considered acceptable practice. 

In the spring of 1989, it was announced that electrochemists at the University of Utah had produced a sustained nuclear fusion reaction at room temperature, using simple equipment available in any high school laboratory. The process, referred to as cold fusion, consists of loading deuterium into pieces of palladium metal by electrolysis of heavy water, E)20, thereby developing a sufficiently large density of deuterium nuclei in the metal lattice to cause fusion between these nuclei to occur. These results have proven extremely difficult to confirm (20,21). Neutrons usually have not been detected in cold fusion experiments, so that the D-D fusion reaction familiar to nuclear physicists does not seem to be the explanation for the experimental results, which typically involve the release of heat and sometimes gamma rays. 

On the other hand, wet chlorination of refinery slimes has proven to be a rapid and simple method of obtaining high extractions of selenium from slimes. A simple wet chlorination flow sheet is shown in Figure 3. Slimes chlorination per se is not a simple deselenization operation, but rather a process wherein virtually all the constituents of slimes which form soluble chlorides report as a complex solution of mixed chlorides. Thus the use of wet chlorination requires a complete change in the process to recover the metal values in slimes. The first plant to use wet chlorination of slimes was started by Kennecott (Salt Lake City, Utah) in 1995. 

Sulfur Polymer Cement. SPC has been proven effective in reducing leach rates of reactive heavy metals to the extent that some wastes can be managed solely as low level waste (LLW). When SPC is combined with mercury and lead oxides (both toxic metals), it interacts chemically to form mercury sulfide, HgS, and lead sulfide, PbS, both of which are insoluble in water. A dried sulfur residue from petroleum refining that contained 600-ppm vanadium (a carcinogen) was chemically modified using dicyclopentadiene and oligomer of cyclopentadiene and used to make SC (58). This material was examined by the California Department of Health Services (Cal EPA) and the leachable level of vanadium had been reduced to 8.3 ppm, well below the soluble threshold limit concentration of 24 ppm (59). 

The analysis of penicillins by mass spectrometry (qv) has developed with the advent of novel techniques such as fast atom bombardment. The use of soft ionization techniques has enabled the analysis of thermally labile nonvolatile compounds. These techniques have proven extremely valuable in providing abundant molecular weight information from underivatized penicillins, both as free acids and as metal salts (15). 

The dry method for synthesizing metal carbonyls from salts and oxides has proven very usehil in a number of cases. The metal carbonyl is formed in the presence of a suitable reducing agent. In some cases CO itself is the reducing agent. Rhenium (97) and technetium (98,99) carbonyls are conveniently... 

Boron, as barium metaborate, is marketed as a mildew preventative for paints (273). Borax is used as a wood preservative, and an organic boron, 2,2 -(l-methyltrimethylenedioxy)-bis(4,4,6-trimethyl)-l,3,2-dioxaborinane (Biobor JF) [14697-50-80] is a biocide for jet fuel (274). Whereas tin metal is used to coat steel cans used as food containers, organic tin in the form of tributyl tin compounds have proven to be powerfiil antimicrobials, and have found use in antifouHng coatings for ship bottoms, paints, and wood preservatives (275). 

The lack of a well-defined specular direction for polycrystalline metal samples decreases the signal levels by 10 —10, and restricts the symmetry information on adsorbates, but many studies using these substrates have proven useful for identifying adsorbates. Charging, beam broadening, and the high probability for excitation of phonon modes of the substrate relative to modes of the adsorbate make it more difficult to carry out adsorption studies on nonmetallic materials. But, this has been done previously for a number of metal oxides and compounds, and also semicon-... 

Conventionally RAIRS has been used for both qualitative and quantitative characterization of adsorbed molecules or films on mirror-like (metallic) substrates [4.265]. In the last decade the applicability of RAIRS to the quantitative analysis of adsorbates on non-metallic surfaces (e.g. semiconductors, glasses [4.267], and water [4.273]) has also been proven. The classical three-phase model for a thin isotropic adsorbate layer on a metallic surface was developed by Greenler [4.265, 4.272]. Calculations for the model have been extended to include description of anisotropic layers on dielectric substrates [4.274-4.276]. 

---