Metal oxides titanium

Anode 1 = plastic cable anode anode 2 = mixed metal oxide-titanium. 

Potassium Non-metal oxides Potassium-sodium alloy Carbon dioxide Sodium Non-metal oxides Titanium Carbon dioxide Uranium Carbon dioxide... 

Design of cathodic protection for marine structures in both fresh and salt water require special techniques. Galvanic systems usually employ zinc or aluminum alloy anodes. Impressed current systems frequently use high silicon, chromium bearing iron, platinized niobium, or mixed-metal oxide/titanium anodes. The structure being protected affects the design. Stationary facihties such as bulkheads and support piles require different techniques from ship hulls [55]. 

Keywords Hydrogen Iron oxide Mixed metal oxides Titanium dioxide Visible-light activation... 

Metal Oxide Nanotube Solid Acid A one-dimensional metal oxide, titanium nanotube was reported as a solid add catalyst [56]. Protonated titanium nanotubes were synthesized by the hydrothermal treatment of bulk titanium oxide in high pH solution, followed by proton exchange. The nanotubes have high surface... 

Titanium IV) oxide, T1O2. See titanium dioxide. Dissolves in concentrated alkali hydroxides to give titanates. Mixed metal oxides, many of commercial importance, are formed by TiOj. CaTiOj is perovskite. BaTiOa, per-ovskite related structure, is piezoelectric and is used in transducers in ultrasonic apparatus and gramophone pickups and also as a polishing compound. Other mixed oxides have the il-menite structure (e.g. FeTiOj) and the spinel structure (e.g. MgjTiO ). 

Commercial metal anodes for the chlorine industry came about after the late 1960s when a series of worldwide patents were awarded (6—8). These were based not on the use of the platinum-group metals (qv) themselves, but on coatings comprised of platinum-group metal oxides or a mixture of these oxides with valve metal oxides, such as titanium oxide (see Platinum-GROUP metals, compounds Titanium compounds). In the case of chlor-alkaH production, the platinum-group metal oxides that proved most appropriate for use as coatings on anodes were those of mthenium and iridium. 

Cathodic Protection Systems. Metal anodes using either platinum [7440-06 ] metal or precious metal oxide coatings on titanium, niobium [7440-03-17, or tantalum [7440-25-7] substrates are extensively used for impressed current cathodic protection systems. A prime appHcation is the use of platinum-coated titanium anodes for protection of the hulls of marine vessels. The controUed feature of these systems has created an attractive alternative... 

Chlorination. In some instances, the extraction of a pure metal is more easily achieved from the chloride than from the oxide. Oxide ores and concentrates react at high temperature with chlorine gas to produce volatile chlorides of the metal. This reaction can be used for common nonferrous metals, but it is particularly useful for refractory metals like titanium (see Titanium and titanium alloys) and 2irconium (see Zirconium and zirconium compounds), and for reactive metals like aluminum. 

Processing. Tungsten carbide is made by heating a mixture of lampblack with tungsten powder in such proportions that a compound with a combined carbon of 6.25 wt % is obtained. The ratio of free-to-combined carbon is of extreme importance. Tantalum and titanium carbides are made by heating a mixture of carbon with the metal oxide. Multicarbide powders, such as M02C—WC, TaC—NbC, and TiC—TaC—WC, are made by a variety of methods, the most important of which is carburization of powder mixtures. 

Nitric acid reacts with all metals except gold, iridium, platinum, rhodium, tantalum, titanium, and certain alloys. It reacts violentiy with sodium and potassium to produce nitrogen. Most metals are converted iato nitrates arsenic, antimony, and tin form oxides. Chrome, iron, and aluminum readily dissolve ia dilute nitric acid but with concentrated acid form a metal oxide layer that passivates the metal, ie, prevents further reaction. 

About 100,000 t of titanium dioxide aimuaHy are used as formulation components in the production of glass (qv), ceramics, electroceramics, catalysts, and in the production of mixed-metal oxide pigments. 

Catalytic alkylation of aniline with diethyl ether, in the presence of mixed metal oxide catalysts, preferably titanium dioxide in combination with molybdenum oxide and/or ferric oxide, gives 63% V/-alkylation and 12% ring alkylation (14). 

The Sulfate Process. A flow diagram for the sulfate process is shown in Figure 1. The strongly exothermic digestion of the dried, milled feedstock in 85—95°/ sulfuric acid converts metal oxides into soluble sulfates, primarily titanium and iron. 

Zirconium [7440-67-7] is classified ia subgroup IVB of the periodic table with its sister metallic elements titanium and hafnium. Zirconium forms a very stable oxide. The principal valence state of zirconium is +4, its only stable valence in aqueous solutions. The naturally occurring isotopes are given in Table 1. Zirconium compounds commonly exhibit coordinations of 6, 7, and 8. The aqueous chemistry of zirconium is characterized by the high degree of hydrolysis, the formation of polymeric species, and the multitude of complex ions that can be formed. 

High Density Polyethylene. High density polyethylene (HDPE), 0.94—0.97 g/cm, is a thermoplastic prepared commercially by two catalytic methods. In one, coordination catalysts are prepared from an aluminum alkyl and titanium tetrachloride in heptane. The other method uses metal oxide catalysts supported on a carrier (see Catalysis). 

Anode Applications. Graphite has been used as the primary material for electrolysis of brine (aqueous) and fused-salt electrolytes, both as anode and cathode. Technological advances, however, have resulted in a dimensionally stable anode (DSA) consisting of precious metal oxides deposited on a titanium substrate that has replaced graphite as the primary anode (38—41) (see Alkali and chlorine products). 

MetaUic conduction occurs in transition-metal oxides such as ReO, vanadium(II) oxide [12035-98-2] VO, titanium(II) oxide [12137-20-17,... 

The most popular SCR catalyst formulations are those that were developed in Japan in the late 1970s comprised of base metal oxides such as vanadium pentoxide [1314-62-1J, V20, supported on titanium dioxide [13463-67-7] Ti02 (1). As for low temperature catalysts, NO conversion rises with increasing temperatures to a plateau and then falls as ammonia oxidation begins to dominate the SCR reaction. However, peak conversion occurs in the temperature range between 300 and 450°C, and the fah-off in NO conversion is more gradual than for low temperature catalysis (44). 

Plate anodes were used for corrosion protection in order to avoid damage due to erosion and cavitation. These consisted of enamelled steel bodies in which a metal oxide-coated titanium anode 1 dm in surface area was fitted. The enamel... 

Titanium dioxide used for adhesive applications should contain an inorganic coating to control polarity, improve its ease of dispersion, and improve its weather resistance. The inorganic coating (zirconium dioxide, silica, alumina) is applied in the aqueous sluny by precipitation of one or more hydrated metal oxides and by neutralization of acidic and alkaline compounds. 

---