Metal oxides electron transport

The logaritlrmic law is also observed when the oxide him is an electrical insulator such as AI2O3. The transport of elecuons tlrrough the oxide is mainly due to a space charge which develops between tire metal-oxide interface and the oxide-gas interface. The incorporation of oxygen in the surface of tire oxide requhes the addition of electrons, and if this occurs by a charging process... 

In the very early stages of oxidation the oxide layer is discontinuous both kinetic and electron microscope" studies have shown that oxidation commences by the lateral extension of discrete oxide nuclei. It is only once these interlace that the direction of mass transport becomes of importance. In the majority of cases the metal then diffuses across the oxide layer in the form of cations and electrons (cationic diffusion), or as with the heavy metal oxides, oxygen may diffuse as ions with a flow of electrons in the reverse direction (anionic diffusion). The number of metals oxidising by both cationic and anionic diffusion is believed to be small, since a favourable energy of activation for one ion generally means an unfavourable value for the other... 

Much of the difficulty in demonstrating the mechanism of breakaway in a particular case arises from the thinness of the reaction zone and its location at the metal-oxide interface. Workers must consider (a) whether the oxide is cracked or merely recrystallised (b) whether the oxide now results from direct molecular reaction, or whether a barrier layer remains (c) whether the inception of a side reaction (e.g. 2CO - COj + C)" caused failure or (d) whether a new transport process, chemical transport or volatilisation, has become possible. In developing these mechanisms both arguments and experimental technique require considerable sophistication. As a few examples one may cite the use of density and specific surface-area measurements as routine of porosimetry by a variety of methods of optical microscopy, electron microscopy and X-ray diffraction at reaction temperature of tracer, electric field and stress measurements. Excellent metallographic sectioning is taken for granted in this field of research. 

These results may be viewed in the wider context of interactions between potential ligands of multifunctional xenobiotics and metal cations in aquatic environments and the subtle effects of the oxidation level of cations such as Fe. The Fe status of a bacterial culture has an important influence on synthesis of the redox systems of the cell since many of the electron transport proteins contain Fe. This is not generally evaluated systematically, although the degradation of tetrachloromethane by a strain of Pseudomonas sp. under denitrifying conditions clearly illustrated the adverse effect of Fe on the biotransformation of the substrate (Lewis and Crawford 1993 Tatara et al. 1993). This possibility should therefore be taken into account in the application of such organisms to bioremediation programs. 

The above mechanistic aspect of electron transport in electroactive polymer films has been an active and chemically rich research topic (13-18) in polymer coated electrodes. We have called (19) the process "redox conduction", since it is a non-ohmic form of electrical conductivity that is intrinsically different from that in metals or semiconductors. Some of the special characteristics of redox conductivity are non-linear current-voltage relations and a narrow band of conductivity centered around electrode potentials that yield the necessary mixture of oxidized and reduced states of the redox sites in the polymer (mixed valent form). Electron hopping in redox conductivity is obviously also peculiar to polymers whose sites comprise spatially localized electronic states. 

In many transition-metal oxides and sulfides, ionic conductivity is augmented by electronic conductivity, and transport numbers need to include contributions from electrons and holes. These mixed conductors are described in Section 8.8. 

Metal oxides possess multiple functional properties, such as acid-base, redox, electron transfer and transport, chemisorption by a and 71-bonding of hydrocarbons, O-insertion and H-abstract, etc. which make them very suitable in heterogeneous catalysis, particularly in allowing multistep transformations of hydrocarbons1-8 and other catalytic applications (NO, conversion, for example9,10). They are also widely used as supports for other active components (metal particles or other metal oxides), but it is known that they do not act often as a simple supports. Rather, they participate as co-catalysts in the reaction mechanism (in bifunctional catalysts, for example).11,12... 

We shall briefly discuss the electrical properties of the metal oxides. Thermal conductivity, electrical conductivity, the Seebeck effect, and the Hall effect are some of the electron transport properties of solids that characterize the nature of the charge carriers. On the basis of electrical properties, the solid materials may be classified into metals, semiconductors, and insulators as shown in Figure 2.1. The range of electronic structures of oxides is very wide and hence they can be classified into two categories, nontransition metal oxides and transition metal oxides. In nontransition metal oxides, the cation valence orbitals are of s or p type, whereas the cation valence orbitals are of d type in transition metal oxides. A useful starting point in describing the structures of the metal oxides is the ionic model.5 Ionic crystals are formed between highly electropositive... 

Titanium as a carrier metal Titanium (or a similar metal such as tantalum, etc.) cannot work directly as anode because a semiconducting oxide layer inhibits any electron transport in anodic direction ( valve metal ). But coated with an electrocatalytic layer, for example, of platinum or of metal oxides (see below), it is an interesting carrier metal due to the excellent corrosion stability in aqueous media, caused by the self-healing passivation layer (e.g. stability against chlorine in the large scale industrial application of Dimension Stable Anodes DSA , see below). 

---