Metal conjugated dienes

Obviously, there is a decrease in 7r-bonding compared to that observed in late transition metal conjugated-diene complexes. With the latter, approximately equal metal-carbon interactions are found, with a tendency... 

If the unsaturated hydrocarbon is a diene, both double bonds may coordinate to pal-ladium(ll). (Diene)palladium(ii) complexes have been isolated and characterized. For example, 2 and 3 are stable complexes in which both double bonds are coordinated to the metal . Conjugated dienes constitute a special case and although -diene complexes, e.g. 4, are postulated as intermediates, they have not yet been isolated. The butadiene complex 4 is in equilibrium with the Tt-allyl complex 5 in solution, and attempts to isolate the diene complex from this mixture lead to formation of a yellow crystalline complex 5. ... 

In Grignard reactions, Mg(0) metal reacts with organic halides of. sp carbons (alkyl halides) more easily than halides of sp carbons (aryl and alkenyl halides). On the other hand. Pd(0) complexes react more easily with halides of carbons. In other words, alkenyl and aryl halides undergo facile oxidative additions to Pd(0) to form complexes 1 which have a Pd—C tr-bond as an initial step. Then mainly two transformations of these intermediate complexes are possible insertion and transmetallation. Unsaturated compounds such as alkenes. conjugated dienes, alkynes, and CO insert into the Pd—C bond. The final step of the reactions is reductive elimination or elimination of /J-hydro-gen. At the same time, the Pd(0) catalytic species is regenerated to start a new catalytic cycle. The transmetallation takes place with organometallic compounds of Li, Mg, Zn, B, Al, Sn, Si, Hg, etc., and the reaction terminates by reductive elimination. 

Pd-cataly2ed reactions of butadiene are different from those catalyzed by other transition metal complexes. Unlike Ni(0) catalysts, neither the well known cyclodimerization nor cyclotrimerization to form COD or CDT[1,2] takes place with Pd(0) catalysts. Pd(0) complexes catalyze two important reactions of conjugated dienes[3,4]. The first type is linear dimerization. The most characteristic and useful reaction of butadiene catalyzed by Pd(0) is dimerization with incorporation of nucleophiles. The bis-rr-allylpalladium complex 3 is believed to be an intermediate of 1,3,7-octatriene (7j and telomers 5 and 6[5,6]. The complex 3 is the resonance form of 2,5-divinylpalladacyclopentane (1) and pallada-3,7-cyclononadiene (2) formed by the oxidative cyclization of butadiene. The second reaction characteristic of Pd is the co-cyclization of butadiene with C = 0 bonds of aldehydes[7-9] and CO jlO] and C = N bonds of Schiff bases[ll] and isocyanate[12] to form the six-membered heterocyclic compounds 9 with two vinyl groups. The cyclization is explained by the insertion of these unsaturated bonds into the complex 1 to generate 8 and its reductive elimination to give 9. 

Conjugated dienes, upon complexation with metal carbonyl complexes, are activated for Friedel-Crafts acylation reaction at the akyhc position. Such reactions are increasingly being used in the stereoselective synthesis of acylated dienes. Friedel-Crafts acetylation of... 

Metal salts of neodecanoic acid have also been used as catalysts in the preparation of polymers. For example, bismuth, calcium, barium, and 2kconium neodecanoates have been used as catalysts in the formation of polyurethane elastomers (91,92). Magnesium neodecanoate [57453-97-1] is one component of a catalyst system for the preparation of polyolefins (93) vanadium, cobalt, copper, or kon neodecanoates have been used as curing catalysts for conjugated-diene butyl elastomers (94). 

The discovery by Ziegler that ethylene and propylene can be polymerized with transition-metal salts reduced with trialkyl aluminum gave impetus to investigations of the polymerization of conjugated dienes (7—9). In 1955, synthetic polyisoprene (90—97% tij -l,4) was prepared using two new catalysts. A transition-metal catalyst was developed at B. E. Goodrich (10) and an alkaU metal catalyst was developed at the Ekestone Tke Rubber Co. (11). Both catalysts were used to prepare tij -l,4-polyisoprene on a commercial scale (9—19). 

The most notable chemistry of the biscylopen-tadienyls results from the aromaticity of the cyclopentadienyl rings. This is now far too extensively documented to be described in full but an outline of some of its manifestations is in Fig. 25.14. Ferrocene resists catalytic hydrogenation and does not undergo the typical reactions of conjugated dienes, such as the Diels-Alder reaction. Nor are direct nitration and halogenation possible because of oxidation to the ferricinium ion. However, Friedel-Crafts acylation as well as alkylation and metallation reactions, are readily effected. Indeed, electrophilic substitution of ferrocene occurs with such facility compared to, say, benzene (3 x 10 faster) that some explanation is called for. It has been suggested that. 

The cycloaddition reactions of carbonyl compounds with conjugated dienes cannot be discussed in this context without trying to understand the reaction mechanistically. This chapter will give the basic background to the reactions whereas Chapter 8 dealing with theoretical aspects of metal-catalyzed cycloaddition reactions will give a more detailed description of this class of reactions, and others discussed in this book. 

The hydrosilation of conjugated dienes is catalyzed by transition metal complexes34, and has been developed into a useful asymmetric synthesis of allylsilanes35,36. 

The addition of allcenes to alkenes can also be accomplished by bases as well as by the use of catalyst systems consisting of nickel complexes and alkylaluminum compounds (known as Ziegler catalysts), rhodium catalysts, and other transition metal catalysts, including iron. These and similar catalysts also catalyze the 1,4 addition of alkenes to conjugated dienes, for example. 

Alkenes can also be oxidized with metallic acetates such as lead tetraacetate or thallium(III) acetate " to give bis-acetates of glycols. Oxidizing agents such as benzoquinone, Mn02, or 02, along with palladium acetate, have been used to convert conjugated dienes to l,4-diacetoxy-2-alkenes (1,4 addition). ... 

Conjugated dienes can be dimerized or trimerized at their 1,4 positions (formally, [4 4- 4] and [4 4-4 4-4] cycloadditions) by treatment with certain complexes or other transition metal compounds. " Thus butadiene gives 1,5-cyclooctadiene and 1,5,9-cyclododecatriene. " The relative amount of each product can be controlled by use of the proper catalyst. For example, Ni P(OC6H4—o-Ph)3 gives predominant dimerization, while Ni(cyclooctadiene)2 gives mostly trimerization. The products arise, not by direct 1,4 to 1,4 attack, but by stepwise mechanisms involving metal-alkene complexes. " ... 

Studies conducted by Barenghi eta.1. (1990) and Lodge etal. (1993) independently have demonstrated the facile, multicomponent analysis of a wide range of PUFA-derived peroxidation products (e.g. conjugated dienes, epoxides and oxysterols) in samples of oxidized LDL by high-field H-NMR spectroscopy. Figure 1.9 shows the applications of this technique to the detection of cholesterol oxidation products (7-ketocholesterol and the 5a, 6a and 5/3,60-epoxides) in isolated samples of plasma LDL pretreated with added coppcr(Il) or an admixture of this metal ion with H2O2, an experiment conducted in the authors laboratories. 

An example of an experiment in which LDL has been treated with 15-lipoxygenase and the oxidation monitored by the formation of conjugated diene is shown in Fig. 2.2. In the absence of transition metal, a rapid increase in absorbance occurs, with no lag phase, which ceases after a period of about 90 min under these conditions. If copper is added to promote LDL oxidation at this point, LDL treated with lipoxygenase oxidizes at a faster rate with a short lag phase when compared to the control. During this procedure there is only a minimal loss of a-tocopherol and so we may ascribe the shortened lag phase to the increase in lipid peroxides brought about by lipoxygenase treatment. A similar result was found when LDL was supplemented with preformed fatty acid hydroperoxides (O Leary eta/., 1992). 

Conjugated dienes are among the most significant building blocks both in laboratories and in the chemical industry [1], Especially, 1,3-butadiene and isoprene are key feedstocks for the manufacture of polymers and fine chemicals. Since the discovery of the Ziegler-Natta catalyst for the polymerizations of ethylene and propylene, the powerful features of transition metal catalysis has been widely recognized, and studies in this field have been pursued very actively [2-7]. 

Nickel(O) complexes are extremely effective for the dimerization and oligomerization of conjugated dienes [8,9]. Two molecules of 1,3-butadiene readily undergo oxidative cyclization with a Ni(0) metal to form bis-allylnickel species. Palladium(O) complexes also form bis-allylpalladium species of structural similarity (Scheme 2). The bis-allylpalladium complexes show amphiphilic reactivity and serve as an allyl cation equivalent in the presence of appropriate nucleophiles, and also serve as an allyl anion equivalent in the presence of appropriate electrophiles. Characteristically, the bis-allylnickel species is known to date only as a nucleophile toward carbonyl compounds (Eq. 1) [10,11],... 

After that, studies on the palladium-catalyzed reactions of conjugated dienes attracted little attention. They have only been reexamined since the late 1960 s. The scope of the reaction of butadiene catalyzed by palladium complexes has gradually been established. The catalysis by palladium is different from those of other transition metals. Although palladium is located below nickel in the periodic table, the catalytic... 

The conjugated diene (including the trans-trans, trans-cis, and cis-cis isomers) can further add ethylene to form Cg olefins or even higher olefins (/). The mechanism of isomerization is proposed to be analogous to butene isomerization reactions (4, 8), i.e., 1-butene to 2-butene, which involves hydrogen shifts via the metal hydride mechanism. A plot of the rate of formation of 2,4-hexadiene vs. butadiene conversion is shown in Fig. 2. 

It has also been shown that LDL oxidation is increased in diabetes. In this connection, Mowri et al. [179] studied the effect of glucose on metal ion-dependent and -independent LDL oxidation. They found that pathophysiological glucose concentrations enhanced copper- and iron-induced LDL oxidation measured via the formation of conjugated dienes. In contrast, glucose had no effect on metal-independent free radical LDL oxidation. Correspondingly,... 

A mild aerobic palladium-catalyzed 1,4-diacetoxylation of conjugated dienes has been developed and is based on a multistep electron transfer46. The hydroquinone produced in each cycle of the palladium-catalyzed oxidation is reoxidized by air or molecular oxygen. The latter reoxidation requires a metal macrocycle as catalyst. In the aerobic process there are no side products formed except water, and the stoichiometry of the reaction is given in equation 19. Thus 1,3-cyclohexadiene is oxidized by molecular oxygen to diacetate 39 with the aid of the triple catalytic system Pd(II)—BQ—MLm where MLm is a metal macrocyclic complex such as cobalt tetraphenylporphyrin (Co(TPP)), cobalt salophen (Co(Salophen) or iron phthalocyanine (Fe(Pc)). The principle of this biomimetic aerobic oxidation is outlined in Scheme 8. 

Towards the end of this section it may be worthwhile to point out some new reactions with high-valent metals and TBHP. The first is a pyridinium dichromate PDC-TBHP system134. Nonsubstituted or alkyl-substituted conjugated dienes, such as 1,3-cyclooctadiene (87) and others (also linear dienes), yield keto allyl peroxides 88 (equation 18), whereas phenyl-substituted dienes such as 1,4-diphenylbutadiene (89) gave diketo compounds, 90 (equation 19). In further research into a GIF-type system135 with iron and TBHP, limonene gave a mixture of products with carvone as the major product. The mechanism is thought to proceed initially by formation of a Fe(V)-carbon... 

---