Metal compounds, formation

Consider the Mg-Ni binary phase diagram shown above. Note that in this system, inter-metallic compound formation is common for example, Mg2Ni, MgNi2 are stoichiometric compounds. 

Metallic compound formation obviously plays a role, and a certain amount of diffusion via nonequilibrium defects would also be expected in some cases, particularly where there is a wide separation between the melting point and the temperature of diffusion. In most cases, the cementing metal also has appreciable vapor pressure at the process tanperatures used, and it is probable that some metal transfer occurs through the gaseous phase. 

Arvl-alkali Metal Compounds. Formation of o-FC(H K has been achieved at -100 C from PhF and BuLi/Bu OK in TBF/hexane llthlation ortho to F occurs in p-FCcH SR and in o-FCfH SPr but with o-FC(H SMe, o-FCtH SCHsLl is obtained. Both [2-F-6-PhS0tC HsLi.PMDTA] QO) and [3-Br-2-Ll-benzofuran.Pr tO] (J2) are stable to -elimination of LiX (X-Br or F) upto 60 C. 

The sonochemistry of solutes dissolved in organic Hquids also remains largely unexplored. The sonochemistry of metal carbonyl compounds is an exception (57). Detailed studies of these systems led to important mechanistic understandings of the nature of sonochemistry. A variety of unusual reactivity patterns have been observed during ultrasonic irradiation, including multiple ligand dissociation, novel metal cluster formation, and the initiation of homogeneous catalysis at low ambient temperature (57). 

Transesterification of methyl methacrylate with the appropriate alcohol is often the preferred method of preparing higher alkyl and functional methacrylates. The reaction is driven to completion by the use of excess methyl methacrylate and by removal of the methyl methacrylate—methanol a2eotrope. A variety of catalysts have been used, including acids and bases and transition-metal compounds such as dialkjitin oxides (57), titanium(IV) alkoxides (58), and zirconium acetoacetate (59). The use of the transition-metal catalysts allows reaction under nearly neutral conditions and is therefore more tolerant of sensitive functionality in the ester alcohol moiety. In addition, transition-metal catalysts often exhibit higher selectivities than acidic catalysts, particularly with respect to by-product ether formation. 

Metal Ahoy formation Compound formation Consolute temperature, °C... 

The materials problems in the construction of microchips are related to both diffusion and chemical interactions between the component layers, as shown above. There is probably a link between drese two properties, since the formation of inter-metallic compounds of medium or high chemical stability frequently leads to tire formation of a compound ban ier in which tire diffusion coefficients of both components are lower than in the pure metals. 

Salt formation. The resin acids have a low acid strength. The pa s (ionization constants) values of resin acids are difficult to obtain, and values of 6.4 and 5.7 have been reported [23] for abietic and dehydroabietic acids, respectively. Resin acids form salts with sodium and aluminium. These salts can be used in detergents because of micelle formation at low concentrations. Other metal salts (resinates) of magnesium, barium, calcium, lead, zinc and cobalt are used in inks and adhesive formulations. These resinates are prepared by precipitation (addition of the heavy metal salt to a solution of sodium resinate) or fusion (rosin is fused with the heavy metal compound). 

Grignard reagents are a very important class of organometallic compounds. For their preparation an alkyl halide or aryl halide 5 is reacted with magnesium metal. The formation of the organometallic species takes place at the metal surface by transfer of an electron from magnesium to a halide molecule, an alkyl or aryl radical species 6 respectively is formed. Whether the intermediate radical species stays adsorbed at the metal surface (the A-modelf, or desorbs into solution (the D-model), still is in debate ... 

Many liquid alloys, in particular, the alkali-group IV alloys, exhibit (Zintl) anion clustering and show strong effects of compound formation. A typical example of such Zintl systems are sodium-tin alloys. In the solid NaSn crystal the Zintl anions Sn appear [1]. An interesting question is the stability of these anions in the liquid. Furthermore, the electrical conductivity of these alloys shows a strong dependence on composition [2] For the limiting (sodium-rich or tin-rich) cases a metallic (small) conductivity appears, but for the nearly equimolar compositions a semi-metallic behavior - with a considerably smaller conductivity - is observed. 

If the major constituents of a solid alloy in contact with a liquid alloy are highly soluble in the latter without formation of compounds, progressive attack by solution is to be expected. If, on the other hand, a stable inter-metallic compound is formed, having a melting point above the temperature of reaction, a layer of this compound will form at the interface and reduce the rate of attack to a level controlled by diffusion processes in the solid state. By far the most serious attack, however, occurs in the presence of stresses, since in this case the liquid alloy, or a product of its reaction with the solid alloy, may penetrate along the grain boundaries, with resultant embrittlement and serious loss of strength. 

There is no intermetallic compound formation and the electrodeposit behaves as a simple mixture of the two metals. It can be considered as basically a stable wick of tin through which zinc is fed to be consumed at a rate lower than its consumption from a wholly zinc surface. If the conditions are such that zinc is rapidly consumed, and no protective layer of corrosion products is formed, the coating may break down, but in mildly corrosive conditions some of the benefits of a zinc coating, without some of its disadvantages, are obtained. 

At the present time the concept of catalytic (or ionic-coordination ) polymerization has been developed by investigating polymerization processes in the presence of transition metal compounds. The catalytic polymerization may be defined as a process in which the catalyst takes part in the formation of the transition complexes of elementary acts during the propagation reaction. 

Two-component systems are obtained by the interaction of transition metal compounds of groups IV-VIII of the periodic system with or-ganometallic compounds of groups I-III elements (Ziegler-Natta catalysts). An essential feature of the formation of the propagation centers in these catalysts is the alkylation of the transition metal ions by an organo-metallic cocatalyst. 

One-component catalysts cause polymerization without organometallic activators in this case the formation of the propagation centers takes place at the interaction of the transition metal compound with the monomer. 

Despite the difference in composition of various olefin polymerization catalysts the problems of the mechanism of their action have much in common. The difference between one-component and traditional Ziegler-Natta two-component catalysts seems to exist only at the stage of genesis of the propagation centers, while the mechanism of the formation of a polymer chain on the propagation center formed has many common basic features for all the catalytic systems based on transition metal compounds. 

Figure 1. Formation of ternary borides MreMj3B2 and different structure types (Mre = rare-earth element, M-p = transition-metal element). , CeCo3B2 type ErIr3B2 type O, URujBj type El, Ndo7,Rh3 29B2 type IS, YOS3B2 type B, Laofi3Rh3B2 type , compound formation observed, but structure type unknown. Refs a , b , c , d e , f g , h , i , j ", k , 1 , m , r, s - , t u = 45 see also ref. 62.

---