Metal cations activity

Keywords Three-function catalyst oxygenates dinitrogen formation supported homogeneous catalysis metal cation active sites. 

Flytzani-Stephanopoulos and coworkers—urea method for preparing high surface area ceria/substituting noble metals with base metals/cationic active sites for Au and Pt-ceria catalysts/deactivation by hydroxycarbonates and improved stability with 02 co-feeding. Li et al.396 reported on low temperature water-gas shift catalysts in their search for a replacement catalyst for Cu/ZnO suitable for use in a fuel... 

Since these early discoveries, xylose isomerases have been isolated from many bacterial species, and these enzymes have been intense investigated, especially those of the genera Streptomyces, Lactobacillus, and Bacillus. The characteristics of substrate specificity (xylose glucose > ribose), divalent metal cation activation (Mg, Mn or Co ), and activity at alkaline pH are properties that most of the enzymes share to a certain extent, but significant variations exist. Some of these em es have been immobilized and patented for commercial use. There are many good reviews in the literature that describe the enzymatic characteristics of the xylose isomerases 9,28,29). 

Cyclic oxocarbenium cations approximate the a- and jS-chelation models for allylations of substituted aldehydes. In this analogy, the nature and the degree of substitution of the carbon bound to the oxonium site replaces the role of coordinated bidentate Lewis acids. Aside from the obvious concerns about the relative reactivity of 126 (Scheme 5.2.27), as compared with metal cation activation of precomplexed aldehyde 127, the C—O bond of 126 is much shorter (1.514 A) than distances associated with the... 

The uptake(pH) curves for the systems metal cation—activated carbon reported in the literature are very divergent, and they indicate significant role of the oxidation of the surface on the one hand and of the impurities on the other. These factors were often not controlled, thus it is difficult to quantify their effect on the adsorption. 

The modification was assumed to be due to the adsorbed metal cations activating the C=0 double bonds, thus accelerating the reaction rate and increasing the selectivity to unsaturated alcohols. In the same field, liu s team reported the... 

Virtually all enzymes that transfer phosphate gronps require metal cation activators. Most use Mg, but Mn + and other divalent cations serve in some cases. 

The increased acidity of the larger polymers most likely leads to this reduction in metal ion activity through easier development of active bonding sites in siUcate polymers. Thus, it could be expected that interaction constants between metal ions and polymer sdanol sites vary as a function of time and the sihcate polymer size. The interaction of cations with a siUcate anion leads to a reduction in pH. This produces larger siUcate anions, which in turn increases the complexation of metal ions. Therefore, the metal ion distribution in an amorphous metal sihcate particle is expected to be nonhomogeneous. It is not known whether this occurs, but it is clear that metal ions and siUcates react in a complex process that is comparable to metal ion hydrolysis. The products of the reactions of soluble siUcates with metal salts in concentrated solutions at ambient temperature are considered to be complex mixtures of metal ions and/or metal hydroxides, coagulated coUoidal size siUca species, and siUca gels. 

Ionic liquids formed by treatment of a halide salt with a Lewis acid (such as chloro-aluminate or chlorostannate melts) generally act both as solvent and as co-catalyst in transition metal catalysis. The reason for this is that the Lewis acidity or basicity, which is always present (at least latently), results in strong interactions with the catalyst complex. In many cases, the Lewis acidity of an ionic liquid is used to convert the neutral catalyst precursor into the corresponding cationic active form. The activation of Cp2TiCl2 [26] and (ligand)2NiCl2 [27] in acidic chloroaluminate melts and the activation of (PR3)2PtCl2 in chlorostannate melts [28] are examples of this land of activation (Eqs. 5.2-1, 5.2-2, and 5.2-3). 

Pourbaix has evaluated all possible equilibria between a metal M and HjO (see Table 1.7) and has consolidated the data into a single potential-pH diagram, which provides a pictorial summary of the anions and cations (nature and activity) and solid oxides (hydroxides, hydrated oxides and oxides) that are at equilibrium at any given pH and potential a similar approach has been adopted for certain M-H2O-X systems where A" is a non-metal, e.g. Cr, CN , CO, SOj , POj", etc. at a defined concentration. These diagrams give the activities of the metal cations and anions at any specified E and pH, and in order to define corrosion in terms of an equilibrium activity, Pourbaix has selected the arbitrary value of 10 ° g ion/1, i.e. corrosion of a metal is defined in terms of the pH and potential that give an equilibrium activity of metal cations or anions > 10 g ion/1 conversely, passivity and immunity are defined in terms of an equilibrium activity of < 10 g ion/1. (Note that g ion/1 is used here because this is the unit used by Pourbaix in the S.I, the relative activity is dimensionless.)... 

Fig. 1.41 Schematic anodic polarisation curves for a passivatable metal showing the effect of a passivating agent that has no specific cathodic action, but forms a sparingly soluble salt with the metal cation, a without the passivating agent, b with the passivating agent. The passive current density, the active/passive transition and the critical current density are all lowered in b. The effect of the cathodic reaction c, is to render the metal active in case a, and passive...

In mimicking this type of function, noncyclic artificial carboxylic ionophores having two terminal groups of hydroxyl and carboxylic acid moieties were synthesized and the selective transport of alkali metal cations were examined by Yamazaki et al. 9 10). Noncyclic polyethers take on a pseudo-cyclic structure when coordinating cations and so it is possible to achieve the desired selectivity for specific cations by adjusting the length of the polyether chain 2). However, they were not able to observe any relationship between the selectivity and the structure of the host molecules in an active transport system using ionophores 1-3 10). (Table 1)... 

By considering the stability constant and the lipophilicity of host molecules, Fyles et al. synthesized a series of carboxylic ionophores having a crown ether moiety and energetically developed the active transport of alkali metal cations 27-32). Ionophores 19-21 possess appropriate stability constants for K+ and show effective K+-selective transports (Fig. 5). Although all of the corresponding [15]crown-5 derivatives (22-24) selectively transport Na+, their transport rates are rather slow compared with... 

A certain crown ether having additional coordination sites for a trasition metal cation (71) changes the transport property for alkali metal cations when it complexes with the transition metal cation 76) (Fig. 13). The fact that a carrier can be developed which has a reversible complexation property for a transition metal cation strongly suggests that this type of ionophore can be applied to the active transport system. 

With less active metals, a chemical reducing agent can be used to reduce a metal cation to the element. The most common reducing agent in metallurgical processes is carbon, in the form of coke or, more exactly, carbon monoxide formed from the coke. 

In the context of Scheme 11-1 we are also interested to know whether the variation of K observed with 18-, 21-, and 24-membered crown ethers is due to changes in the complexation rate (k ), the decomplexation rate (k- ), or both. Krane and Skjetne (1980) carried out dynamic 13C NMR studies of complexes of the 4-toluenediazo-nium ion with 18-crown-6, 21-crown-7, and 24-crown-8 in dichlorofluoromethane. They determined the decomplexation rate (k- ) and the free energy of activation for decomplexation (AG i). From the values of k i obtained by Krane and Skjetne and the equilibrium constants K of Nakazumi et al. (1983), k can be calculated. The results show that the complexation rate (kx) does not change much with the size of the macrocycle, that it is most likely diffusion-controlled, and that the large equilibrium constant K of 21-crown-7 is due to the decomplexation rate constant k i being lower than those for the 18- and 24-membered crown ethers. Izatt et al. (1991) published a comprehensive review of K, k, and k data for crown ethers and related hosts with metal cations, ammonium ions, diazonium ions, and related guest compounds. 

Chiral-at-metal cations can themselves serve as chirality inducers. For example, optically pure Ru[(bipy)3] proved to be an excellent chiral auxihary for the stereoselective preparation of optically active 3D anionic networks [M(II)Cr(III)(oxalate)3]- n (with M = Mn, Ni), which display interesting magnetic properties. In these networks all of the metalhc centers have the same configuration, z or yl, as the template cation, as shown by CD spectroscopy and X-ray crystallography [43]. 

The classical view of the lone pair is that, after mixing of the s and p orbitals on the heavy metal cation, the lone pair occupies an inert orbital in the ligand sphere [6]. This pair of electrons is considered chemically inert but stereochemi-cally active [7]. However, this implies that the lone pair would always and in any (chemical) environment be stereochemically active, which is not the case. For example, TIF [8] adopts a structure, which can be considered as a NaCl type of structure which is distorted by a stereochemically active lone pair on thallium. In contrast TlCl [9] and TlBr [10] adopt the undistorted CsCl type of structure at ambient temperature, and at lower temperatures the (again undistorted) NaCl type of structure. The structure of PbO [11] is clearly characterized by the stereochemically active lone pair. In all the other 1 1 compounds of lead with... 

At another type of active electrode, found in many batteries, the reaction is the conversion between a metal and an Insoluble salt. At the surface of this type of electrode, metal cations combine with anions from the solution to form the salt. One example is the cadmium anode of a rechargeable nickel-cadmium battery, at whose surface cadmium metal loses electrons and forms cations. These cations combine immediately with hydroxide ions in... 

PBE dendrons bearing a focal bipyridine moiety have been demonstrated to coordinate to Ru + cations, exhibiting luminescence from the metal cation core by the excitation of the dendron subunits [28-30]. The terminal peripheral unit was examined (e.g., phenyl, naphthyl, 4-f-butylphenyl) to control the luminescence. The Ru +-cored dendrimer complexes are thought to be photo/redox-active, and photophysical properties, electrochemical behavior, and excited-state electron-transfer reactions are reported. 

Spectroscopy of the PES for reactions of transition metal (M ) and metal oxide cations (MO ) is particularly interesting due to their rich and complex chemistry. Transition metal M+ can activate C—H bonds in hydrocarbons, including methane, and activate C—C bonds in alkanes [18-20] MO are excellent (and often selective) oxidants, capable of converting methane to methanol [21] and benzene to phenol [22-24]. Transition metal cations tend to be more reactive than the neutrals for two general reasons. First, most neutral transition metal atoms have a ground electronic state, and this... 

---